Satish Dhawan Space Centre Second Launch Pad

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Junomangalyaan (talk | contribs) at 15:38, 28 June 2017. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Second Launch Pad
Map
Launch siteSatish Dhawan Space Centre
Location13°43′12″N 80°13′49″E / 13.7199°N 80.2304°E / 13.7199; 80.2304
Short nameSLP
OperatorIndia ISRO
Launch history
StatusActive
Launches17
First launch5 May 2005
PSLV / Cartosat-1
Last launch08 September 2016
GSLV / INSAT-3DR
Associated
rockets
PSLV
GSLV Mk.I
GSLV Mk.II

GSLV Mk.III

The Second Launch Pad of the Satish Dhawan Space Centre is a rocket launch site in Sriharikota, India. It is the second of two launch pads at the centre. The Second Launch Pad or SLP was designed, supplied, erected & commissioned by MECON Limited, a Government of Indian Enterprise, located at Ranchi (Jharkhand, India) during the period March 1999 to December 2003.[1] It cost about Rs 400 Cr at that time.[2] The second launch pad with associated facilities was built in 2005. However it became operational only on 5 May 2005 with the launching of PSLV-C6. MECON's sub-contractors for this project including Inox India, HEC, Tata Growth, Goderej Boyce, Simplex, Nagarjuna Construction, Steelage, etc. The other Launch Pad being the First Launch Pad. It is used by Polar Satellite Launch Vehicles and Geosynchronous Satellite Launch Vehicles, and is intended for use with future Indian rockets including the Geosynchronous Satellite Launch Vehicle Mk.III[3]

Launches

The first launch from the pad occurred on 5 May 2005, and was of a Polar Satellite Launch Vehicle carrying the CARTOSAT-1 and HAMSAT satellites.[4] As of 2016, 9 PSLVs (all successful) and 6 GSLVs (2 success, 1 partial success & 3 failures) have been launched from the complex. India's 1st Moon Mission, Chandrayan-I was launched from this launch pad on 22 October 2008. The most recent launch was of a PSLV-XL C32 on 10 March 2016.[5]

Facilities

"As per the "Integrate, Transfer and Launch (ITL)" concept, based on which the launch pad and the associated facilities are designed, the entire vehicle is assembled and checked-out on a mobile pedestal in the Vehicle Assembly Building (VAB) and then moved in vertical position to the launch pad on a roll track."[6]

"Other facilities include, Solid Stage Assembly Building (SSAB) connected to the Vehicle Assembly Building (VAB) by a rail track, Technical Complex-2 (TC2), Spacecraft Preparation Facility, Range Instrumentation facilities comprising tracking, telemetry and tele-command systems."[6]

References

  1. ^ http://www.meconlimited.co.in/FlashNews/Chandrayaan.pdf
  2. ^ http://www.telegraphindia.com/1081023/jsp/jharkhand/story_10006297.jsp
  3. ^ "Launch Facility". Indian Space Research Organisation. Retrieved 12 April 2010.
  4. ^ Wade, Mark. "Sriharikota SLP". Encyclopedia Astronautica. Retrieved 12 April 2010.
  5. ^ ISRO-developed computer helped PSLV-C17 put satellite in orbit
  6. ^ a b Public domain text sourced from the link - ISRO Launch Facilities