Jump to content

Zirconium(IV) iodide

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by LaundryPizza03 (talk | contribs) at 20:47, 18 June 2022 (removed Category:Zirconium compounds; added Category:Zirconium(IV) compounds using HotCat). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Zirconium(IV) iodide
Names
Other names
zirconium tetraiodide
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.034.332 Edit this at Wikidata
EC Number
  • 237-780-9
UNII
  • InChI=1S/4HI.Zr/h4*1H;/q;;;;+4/p-4 checkY
    Key: XLMQAUWIRARSJG-UHFFFAOYSA-J checkY
  • InChI=1/4HI.Zr/h4*1H;/q;;;;+4/p-4
    Key: XLMQAUWIRARSJG-XBHQNQODAZ
  • [Zr+4].[I-].[I-].[I-].[I-]
Properties
ZrI4
Molar mass 598.842 g/mol
Appearance orange-yellow crystalline
hygroscopic
Density 4.914 g/cm3
Melting point 499[1] °C (930 °F; 772 K)
(triple point)
Boiling point 431 °C (808 °F; 704 K) (sublimes)
Structure
Monoclinic, mP30
P2/c, No. 13
Hazards
GHS labelling:
GHS05: Corrosive
Danger
H314
P260, P264, P280, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P321, P363, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 0: Will not burn. E.g. waterInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazards (white): no code
3
0
2
Related compounds
Other anions
Zirconium(IV) fluoride
Zirconium(IV) chloride
Zirconium(IV) bromide
Other cations
Titanium tetraiodide
Hafnium tetraiodide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Zirconium(IV) iodide is the chemical compound with the formula ZrI4. It is the most readily available iodide of zirconium. It is an orange-coloured solid that degrades in the presence of water. The compound was once prominent as an intermediate in the purification of zirconium metal.

Structure

Like most binary metal halides, zirconium(IV) iodide adopts a polymeric structure. As characterized by X-ray crystallography, the compound consists of octahedral Zr(IV) centers interconnected by four doubly bridging iodide ligands. The Zr-I distances of 2.692 (terminal) and 3.030 Å[2][3]

Synthesis and reactions

This compound is volatile, subliming as intact tetrahedral ZrI4 molecules. It is prepared by the direct reaction of powdered zirconium metal and iodine.[1]

Pyrolysis of zirconium(IV) iodide gas by contact of hot wire was the first industrial process for the commercial production of pure ductile metallic zirconium. This crystal bar process was developed by Anton Eduard van Arkel and Jan Hendrik de Boer in 1925.[4]

References

  1. ^ a b Eberly, K. C. (1963). "Zirconium(IV) Iodide". Inorganic Syntheses. Inorganic Syntheses. Vol. 7. pp. 52–54. doi:10.1002/9780470132388.ch13. ISBN 9780470132388..
  2. ^ Krebs, B.; Henkel, G.; Dartmann, M. (1979). "Kristallstruktur von Zirkoniumtetrajodid ZrI4: ein neuer AB4-Strukturtyp". Acta Crystallogr. B35 (2): 274-278. doi:10.1107/S0567740879003344.
  3. ^ Troyanov, S. I. (1986). "Crystal Structure of γ-ZrI4". Kristallografiya. 31: 446-449.
  4. ^ van Arkel, A. E.; de Boer, J. H. (1925). "Darstellung von reinem Titanium-, Zirkonium-, Hafnium- und Thoriummetall". Zeitschrift für anorganische und allgemeine Chemie (in German). 148 (1): 345–350. doi:10.1002/zaac.19251480133.