Jump to content

Villar Perosa aircraft submachine gun: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
VolkovBot (talk | contribs)
m r2.5.1) (robot Modifying: ru:Villar-Perosa M1915
Line 54: Line 54:


==External links==
==External links==
*{{ru icon}} [http://www.dogswar.ru/strelkovoe-oryjie/pistolety-pylemety/3785-pistolet-pylemet-vil.html Villar-Perosa M15 from DogsWar.ru]
* [http://www.cimeetrincee.it/mit11.gif Defence Configuration]
* [http://www.cimeetrincee.it/mit11.gif Defence Configuration]
* [http://guns.connect.fi/gow/villarpe.jpg Replica Aircraft Configuration]
* [http://guns.connect.fi/gow/villarpe.jpg Replica Aircraft Configuration]

Revision as of 14:22, 16 March 2011

Villar-Perosa
TypeMachine gun
Place of originItaly Kingdom of Italy
Service history
Used byItalian Army
WarsWorld War I
Production history
Designed1914
Specifications
Mass6.5 kg (loaded short barreled version)
Length21 inches

Cartridge
  • 9 mm Glisenti
  • .455 Webley Auto Mk I[1]
  • Caliber9 mm
    Barrels2 side by side
    Actionblowback
    Rate of fire3,000 round/min
    Muzzle velocity1,050 ft/s (320 m/s) [citation needed]
    Effective firing range1,800 m (2,200 yd) [citation needed]
    Feed systemBox Magazine

    The Villar-Perosa aircraft submachine gun was an Italian double barreled light machine gun designed by Bethel Abiel Revelli, a Major in the Italian Army in 1914. The weapon fired pistol calibre 9 mm Glisenti ammunition, a reduced-power version of the famous 9 mm Para, at the extremely high rate of fire of 3,000 rounds per minute, or 1,500 rounds per minute per barrel. It was arguably the first submachine gun though it was highly impractical due to its design as a stationary machine gun.

    History

    Revelli applied for patents for the design on 8 April 1914, and subsequently assigned the patents to the Villar-Perosa company. The weapon was used by the Italian airforce and army during the First World War. Reportedly it was more successful in the ground role, as the pistol calibre bullets did not have sufficient striking power for bringing down aircraft.

    A large number of the ground version of the weapon fell into the hands of German and Austrian forces following the Italian defeat at the Battle of Caporetto. As many soldiers found the weapon impractical, the Beretta firearm manufacturer cannibalized surviving examples to be converted into two single-barreled shoulder-fired weapons in 1918. Called the Beretta Model 1918, these weapons would see occasional battlefield use and are believed to account for the dearth of complete Villar Perosas today. The Italians produced a version called the OVP, which was basically a Villar-Perosa split in two. There was no grip forward of the magazine, so soldiers had to make do with whatever they could find.

    Description

    The weapon consisted of two identical barrels and breech blocks (essentially two separate weapons) linked by a connecting cross bar. It was a simple air-cooled blow-back design with the bolt and striker weighing only ten ounces (280 grams). The total recoil travel was only 1.75 inches (4.5 cm) which, combined with the light, 10-ounce bolt, resulted in an extremely high rate of fire.

    The weapon was fed from two curved magazines that could hold either 25 or 50 rounds each (the 50 round version was primarily used by aircraft). Each 'half' of the weapon operated with an independent trigger, so that they could be fired individually or simultaneously, as the user wished.

    The weapon was relatively light with a loaded short barreled gun weighing just 14 pounds and 4 ounces (6.5 kg). However, it was virtually impossible to use in the advance because of the unique design of the triggers. Some soldiers experimented with mounting it on a harness carrier or to the handlebars of a bicycle (called Bersaglieri Ciclisti), but this was impractical.

    See also

    References

    1. ^ Schreier, Philip (July 2009). "The World's First Sub-Gun". Guns & Ammo Magazine: Surplus Firearms.