Data center: Difference between revisions
→External links: www.datacentreworld.com - added in the uk data centre event. |
No edit summary |
||
Line 31: | Line 31: | ||
* To prevent [[single point of failure|single points of failure]], all elements of the electrical systems, including backup system, are typically fully duplicated, and critical servers are connected to both the "A-side" and "B-side" power feeds. This arrangement is often made to achieve [[N+1 Redundancy]] in the systems. Static switches are sometimes used to ensure instantaneous switchover from one supply to the other in the event of a power failure. |
* To prevent [[single point of failure|single points of failure]], all elements of the electrical systems, including backup system, are typically fully duplicated, and critical servers are connected to both the "A-side" and "B-side" power feeds. This arrangement is often made to achieve [[N+1 Redundancy]] in the systems. Static switches are sometimes used to ensure instantaneous switchover from one supply to the other in the event of a power failure. |
||
* Data centers typically have [[raised floor]]ing made up of 60 cm (2 ft) removable square tiles.The trend is towards 80–100cm (31.5–39.4in) void to cater for better and uniform air distribution. These provide a [[plenum]] for air to circulate below the floor, as part of the air conditioning system, as well as providing space for power cabling. Data cabling is typically routed through overhead [[cable tray]]s in modern data centers. But some are still recommending under raised floor cabling for security reasons and to consider the addition of cooling systems above the racks in case this enhancement is necessary. Smaller/less expensive data centers without raised flooring may use anti-static tiles for a flooring surface. |
* Data centers typically have [[raised floor]]ing made up of 60 cm (2 ft) removable square tiles.The trend is towards 80–100cm (31.5–39.4in) void to cater for better and uniform air distribution. These provide a [[plenum]] for air to circulate below the floor, as part of the air conditioning system, as well as providing space for power cabling. Data cabling is typically routed through overhead [[cable tray]]s in modern data centers. But some are still recommending under raised floor cabling for security reasons and to consider the addition of cooling systems above the racks in case this enhancement is necessary. Smaller/less expensive data centers without raised flooring may use anti-static tiles for a flooring surface. |
||
* Data centers feature [[fire protection]] systems, including [[passive fire protection|passive]] and [[active fire protection|active]] design elements, as well as implementation of [[fire prevention]] programs in operations. [[Smoke detectors]] are usually installed to provide early warning of a developing fire by detecting particles generated by smoldering components prior to the development of flame. This allows investigation, interruption of power, and manual fire suppression using hand held fire extinguishers before the fire grows to a large size. A [[fire sprinkler system]] is often provided to control a full scale fire if it develops. Fire sprinklers require 18" of clearance [free of cable trays, etc] below the sprinklers. Fire sprinklers typically are spaced as much as 14' on centers. [[Clean agent]] fire suppression gaseous systems are sometimes installed to suppress a fire earlier than the fire sprinkler system. Passive fire protection elements include the installation of [[fire walls]] around the data center, so a fire can be restricted to a portion of the facility for a limited time in the event of the failure of the active fire protection systems, or if they are not installed. |
* Data centers feature [[fire protection]] systems, including [[passive fire protection|passive]] and [[active fire protection|active]] design elements, as well as implementation of [[fire prevention]] programs in operations. [[Smoke detectors]] are usually installed to provide early warning of a developing fire by detecting particles generated by smoldering components prior to the development of flame. This allows investigation, interruption of power, and manual fire suppression using hand held fire extinguishers before the fire grows to a large size. A [[fire sprinkler system]] is often provided to control a full scale fire if it develops. Fire sprinklers require 18" of clearance [free of cable trays, etc] below the sprinklers. Fire sprinklers typically are spaced as much as 14' on centers. [[Clean agent]] fire suppression gaseous systems are sometimes installed to suppress a fire earlier than the fire sprinkler system. Passive fire protection elements include the installation of [[Firewall_(construction)|fire walls]] around the data center, so a fire can be restricted to a portion of the facility for a limited time in the event of the failure of the active fire protection systems, or if they are not installed. |
||
* Physical security also plays a large role with data centers. Physical access to the site is usually restricted to selected personnel, with controls including [[bollard]]s and [[mantrap]]s.<ref>[http://www.csoonline.com/article/220665 19 Ways to Build Physical Security Into a Data Center]</ref> [[Video camera]] surveillance and permanent [[security guard]]s are almost always present if the data center is large or contains sensitive information on any of the systems within. |
* Physical security also plays a large role with data centers. Physical access to the site is usually restricted to selected personnel, with controls including [[bollard]]s and [[mantrap]]s.<ref>[http://www.csoonline.com/article/220665 19 Ways to Build Physical Security Into a Data Center]</ref> [[Video camera]] surveillance and permanent [[security guard]]s are almost always present if the data center is large or contains sensitive information on any of the systems within. |
||
Revision as of 01:31, 7 February 2009
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/a7/NetworkOperations.jpg/220px-NetworkOperations.jpg)
A data center is a facility used to house computer systems and associated components, such as telecommunications and storage systems. It generally includes redundant or backup power supplies, redundant data communications connections, environmental controls (e.g., air conditioning, fire suppression) and security devices.
History
Data centers have their roots in the huge computer rooms of the early ages of the computing industry. Early computer systems were complex to operate and maintain, and required a special environment in which to operate. Many cables were necessary to connect all the components, and methods to accommodate and organize these were devised, such as standard racks to mount equipment, elevated floors, and cable trays (installed overhead or under the elevated floor). Also, old computers required a great deal of power, and had to be cooled to avoid overheating. Security was important – computers were expensive, and were often used for military purposes. Basic design guidelines for controlling access to the computer room were therefore devised.
During the boom of the microcomputer industry, and especially during the 1980s, computers started to be deployed everywhere, in many cases with little or no care about operating requirements. However, as information technology (IT) operations started to grow in complexity, companies grew aware of the need to control IT resources. With the advent of client-server computing, during the 1990s, microcomputers (now called "servers") started to find their places in the old computer rooms. The availability of inexpensive networking equipment, coupled with new standards for network cabling, made it possible to use a hierarchical design that put the servers in a specific room inside the company. The use of the term "data center," as applied to specially designed computer rooms, started to gain popular recognition about this time.
The boom of data centers came during the dot-com bubble. Companies needed fast Internet connectivity and nonstop operation to deploy systems and establish a presence on the Internet. Installing such equipment was not viable for many smaller companies. Many companies started building very large facilities, called Internet data centers (IDCs), which provide businesses with a range of solutions for systems deployment and operation. New technologies and practices were designed to handle the scale and the operational requirements of such large-scale operations. These practices eventually migrated toward the private data centers, and were adopted largely because of their practical results.
As of 2007[update], data center design, construction, and operation is a well-known discipline. Standard documents from accredited professional groups, such as the Telecommunications Industry Association, specify the requirements for data center design. Well-known operational metrics for data center availability can be used to evaluate the business impact of a disruption. There is still a lot of development being done in operation practice, and also in environmentally-friendly data center design.
Requirements for modern data centers
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/a0/Datacenter-telecom.jpg/220px-Datacenter-telecom.jpg)
IT operations are a crucial aspect of most organizational operations. One of the main concerns is business continuity; companies rely on their information systems to run their operations. If a system becomes unavailable, company operations may be impaired or stopped completely. It is necessary to provide a reliable infrastructure for IT operations, in order to minimize any chance of disruption. Information security is also a concern, and for this reason a data center has to offer a secure environment which minimizes the chances of a security breach. A data center must therefore keep high standards for assuring the integrity and functionality of its hosted computer environment.
Data center classification
The TIA-942:Data Center Standards Overview describes the requirements for the data center infrastructure. The simplest is a Tier 1 data center, which is basically a computer room, following basic guidelines for the installation of computer systems. The most stringent level is a Tier 4 data center, which is designed to host mission critical computer systems, with fully redundant subsystems and compartmentalized security zones controlled by biometric access controls methods. Another consideration is the placement of the data center in a subterranean context, for data security as well as environmental considerations such as cooling requirements.[1]
Physical layout
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f5/Rack001.jpg/220px-Rack001.jpg)
A data center can occupy one room of a building, one or more floors, or an entire building. Most of the equipment is often in the form of servers mounted in 19 inch rack cabinets, which are usually placed in single rows forming corridors between them. This allows people access to the front and rear of each cabinet. Servers differ greatly in size from 1U servers to large freestanding storage silos which occupy many tiles on the floor. Some equipment such as mainframe computers and storage devices are often as big as the racks themselves, and are placed alongside them. Very large data centers may use shipping containers packed with 1,000 or more servers each; when repairs or upgrades are needed, whole containers are replaced (rather than repairing individual servers).[2]
Local building codes may govern the minimum ceiling heights (for example Seattle, WA seems to require a minimum of 10' high ceiling). The IBC seems to require a minium of 7'6".
The physical environment of a data center is rigorously controlled:
- Air conditioning is used to control the temperature and humidity in the data center. ASHRAE's "Thermal Guidelines for Data Processing Environments"[3] recommends a temperature range of 20–25 °C (68–75 °F) and humidity range of 40–55% with a maximum dew point of 17°C as optimal for data center conditions.[4] The electrical power used heats the air in the data center. Unless the heat is removed, the ambient temperature will rise, resulting in electronic equipment malfunction. By controlling the air temperature, the server components at the board level are kept within the manufacturer's specified temperature/humidity range. Air conditioning systems help control humidity by cooling the return space air below the dew point. Too much humidity, and water may begin to condense on internal components. In case of a dry atmosphere, ancillary humidification systems may add water vapor if the humidity is too low, which can result in static electricity discharge problems which may damage components. Subterranean data centers may keep computer equipment cool while expending less energy than conventional designs.
- In rooms protected by fire sprinklers, the NFPA requirements seem to require that Hot aisle and cold aisle containment (separation) have a row of sprinklers over every hot aisle and another row over every cold aisle.
- Backup power consists of one or more uninterruptible power supplies and/or diesel generators.
- To prevent single points of failure, all elements of the electrical systems, including backup system, are typically fully duplicated, and critical servers are connected to both the "A-side" and "B-side" power feeds. This arrangement is often made to achieve N+1 Redundancy in the systems. Static switches are sometimes used to ensure instantaneous switchover from one supply to the other in the event of a power failure.
- Data centers typically have raised flooring made up of 60 cm (2 ft) removable square tiles.The trend is towards 80–100cm (31.5–39.4in) void to cater for better and uniform air distribution. These provide a plenum for air to circulate below the floor, as part of the air conditioning system, as well as providing space for power cabling. Data cabling is typically routed through overhead cable trays in modern data centers. But some are still recommending under raised floor cabling for security reasons and to consider the addition of cooling systems above the racks in case this enhancement is necessary. Smaller/less expensive data centers without raised flooring may use anti-static tiles for a flooring surface.
- Data centers feature fire protection systems, including passive and active design elements, as well as implementation of fire prevention programs in operations. Smoke detectors are usually installed to provide early warning of a developing fire by detecting particles generated by smoldering components prior to the development of flame. This allows investigation, interruption of power, and manual fire suppression using hand held fire extinguishers before the fire grows to a large size. A fire sprinkler system is often provided to control a full scale fire if it develops. Fire sprinklers require 18" of clearance [free of cable trays, etc] below the sprinklers. Fire sprinklers typically are spaced as much as 14' on centers. Clean agent fire suppression gaseous systems are sometimes installed to suppress a fire earlier than the fire sprinkler system. Passive fire protection elements include the installation of fire walls around the data center, so a fire can be restricted to a portion of the facility for a limited time in the event of the failure of the active fire protection systems, or if they are not installed.
- Physical security also plays a large role with data centers. Physical access to the site is usually restricted to selected personnel, with controls including bollards and mantraps.[5] Video camera surveillance and permanent security guards are almost always present if the data center is large or contains sensitive information on any of the systems within.
Network infrastructure
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/04/Paris_servers_DSC00190.jpg/220px-Paris_servers_DSC00190.jpg)
Communications in data centers today are most often based on networks running the IP protocol suite. Data centers contain a set of routers and switches that transport traffic between the servers and to the outside world. Redundancy of the Internet connection is often provided by using two or more upstream service providers (see Multihoming).
Some of the servers at the data center are used for running the basic Internet and intranet services needed by internal users in the organization, e.g., e-mail servers, proxy servers, and DNS servers.
Network security elements are also usually deployed: firewalls, VPN gateways, intrusion detection systems, etc. Also common are monitoring systems for the network and some of the applications. Additional off site monitoring systems are also typical, in case of a failure of communications inside the data center.
Applications
![](http://upload.wikimedia.org/wikipedia/commons/thumb/5/54/Floridaserversfront1.jpg/220px-Floridaserversfront1.jpg)
The main purpose of a data center is running the applications that handle the core business and operational data of the organization. Such systems may be proprietary and developed internally by the organization, or bought from enterprise software vendors. Such common applications are ERP and CRM systems.
A data center may be concerned with just operations architecture or it may provide other services as well.
Often these applications will be composed of multiple hosts, each running a single component. Common components of such applications are databases, file servers, application servers, middleware, and various others.
Data centers are also used for off site backups. Companies may subscribe to backup services provided by a data center. This is often used in conjunction with backup tapes. Backups can be taken of servers locally on to tapes., however tapes stored on site pose a security threat and are also susceptible to fire and flooding. Larger companies may also send their backups off site for added security. This can be done by backing up to a data center. Encrypted backups can be sent over the Internet to data center where they can be stored securely.
For disaster recovery, several large hardware vendors have developed mobile solutions that can be installed and made operational in very short time. Vendors such as Cisco Systems,[6] Sun Microsystems,[7][8] and IBM have developed systems that could be used for this purpose.[9]
See also
- Central apparatus room
- Colocation center
- Disaster recovery
- Electrical network
- HVAC
- Internet exchange point
- Network operations center
- Peering
- Server farm
- Server room
- Sun Modular Datacenter
- Telecommunications network
- Vendor-neutral data centre
References
- ^ A ConnectKentucky article mentioning Stone Mountain Data Center Complex "Global Data Corp. to Use Old Mine for Ultra-Secure Data Storage Facility" (PDF). ConnectKentucky. 2007-11-01. Retrieved 2007-11-01.
- ^ "Walking the talk: Microsoft builds first major container-based data center". Retrieved 2008-09-22.
- ^ "ASHRAE's "Thermal Guidelines for Data Processing Environments"" (PDF).
- ^ "ServersCheck's Blog on Why Humidity Monitoring". July 1, 2008.
{{cite web}}
: Check date values in:|date=
(help) - ^ 19 Ways to Build Physical Security Into a Data Center
- ^ "Info and video about Cisco's solution". Datacentreknowledge. May 15, 2007. Retrieved 2008-05-11.
{{cite web}}
: Check date values in:|date=
(help) - ^ "Technical specs of Sun's Blackbox". Retrieved 2008-05-11.
- ^ And English Wiki article on Sun's modular datacentre
- ^ Kraemer, Brian (June 11, 2008). "IBM's Project Big Green Takes Second Step". ChannelWeb. Retrieved 2008-05-11.
{{cite web}}
: Check date values in:|date=
(help)
External links
- Lawrence Berkeley Lab - Research, development, demonstration, and deployment of energy-efficient technologies and practices for data centers
- Data Centre Management - Data Centre Management the UK Journal covering data centre management from design to migration
- Data Centre World Conference - The UK's largest gathering of data centre and server room professionals Free to attend conference and expo. Papers include design, infrastructure, connectivity and migration isses plus the deployment of energy-efficient technologies and practices for data centers