Exciton: Difference between revisions
Line 13: | Line 13: | ||
===Frenkel excitons=== |
===Frenkel excitons=== |
||
In materials with a small [[dielectric constant]], the |
In materials with a small [[dielectric constant]], the Coulombic interaction between electron and hole may be strong and the excitons thus tend to be small, of the same order as the size of the unit cell. Molecular excitons may even be entirely located on the same molecule, as in [[fullerene]]s. In these cases, the electron and hole lie within the same unit cell. This ''Frenkel exciton'', named after [[Yakov Frenkel]], has a typical binding energy on the order of 0.1 to 1 [[electron volt|eV]]. Frenkel excitons are realized in alkalihalide crystals and in organic molecular crystals composed of aromatic molecules. |
||
Anthracene, Tetracene, Pentacene, Phenanthrene, Porphyrin, Phenazine, PTCDA, |
Anthracene, Tetracene, Pentacene, Phenanthrene, Porphyrin, Phenazine, PTCDA, |
||
and many many others;The Frenkel excitons are typical for these materials. |
and many many others;The Frenkel excitons are typical for these materials. |
Revision as of 05:53, 25 May 2011
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/0e/LiF_charge-transfer_exciton.jpg/220px-LiF_charge-transfer_exciton.jpg)
An exciton is a bound state of an electron and hole which are attracted to each other by the electrostatic Coulomb force. It is an electrically neutral quasiparticle that exists in insulators, semiconductors and some liquids. The exciton is regarded as an elementary excitation of condensed matter that can transport energy without transporting net electric charge.[2]
An exciton forms when a photon is absorbed by a semiconductor. This excites an electron from the valence band into the conduction band. In turn, this leaves behind a localized positively-charged hole. The electron in the conduction band is then attracted to this localized hole by the Coulomb force. This attraction provides a stabilizing energy balance. Consequently, the exciton has slightly less energy than the unbound electron and hole. The wavefunction of the bound state is said to be hydrogenic, an exotic atom state akin to that of a hydrogen atom. However, the binding energy is much smaller and the particle's size much larger than a hydrogen atom. This is because of both the screening of the Coulomb force by other electrons in the semiconductor ( i.e., its dielectric constant), and the small effective masses of the excited electron and hole. The recombination of the electron and hole, i.e. the decay of the exciton, is limited by resonance stabilization due to the overlap of the electron and hole wave functions, resulting in an extended lifetime for the exciton.
The electron and hole may have either parallel or anti-parallel spins. The spins are coupled by the exchange interaction, giving rise to exciton fine structure. In periodic lattices, the properties of exciton show momentum (k-vector) dependence.
The concept of excitons was first proposed by Yakov Frenkel in 1931,[3] when he described the excitation of atoms in a lattice of insulators. He proposed that this excited state would be able to travel in a particle-like fashion through the lattice without the net transfer of charge.
Classification
Excitons may be treated in two limiting cases, depending on the properties of the material in question.
Frenkel excitons
In materials with a small dielectric constant, the Coulombic interaction between electron and hole may be strong and the excitons thus tend to be small, of the same order as the size of the unit cell. Molecular excitons may even be entirely located on the same molecule, as in fullerenes. In these cases, the electron and hole lie within the same unit cell. This Frenkel exciton, named after Yakov Frenkel, has a typical binding energy on the order of 0.1 to 1 eV. Frenkel excitons are realized in alkalihalide crystals and in organic molecular crystals composed of aromatic molecules. Anthracene, Tetracene, Pentacene, Phenanthrene, Porphyrin, Phenazine, PTCDA, and many many others;The Frenkel excitons are typical for these materials.
Wannier-Mott excitons
In semiconductors, the dielectric constant is generally large. Consequently, electric field screening tends to reduce the Coulomb interaction between electrons and holes. The result is a Wannier exciton,[4] which has a radius larger than the lattice spacing. As a result, the effect of the lattice potential can be incorporated into the effective masses of the electron and hole. Likewise, because of the lower masses and the screened Coulomb interaction, the binding energy is usually much less than a hydrogen atom, typically on the order of 0.01eV. This type of exciton was named for Gregory Wannier and Nevill Francis Mott. Wannier-Mott excitons are typically found in semiconductor crystals with small energy gaps and high dielectric constant, but have also been identified in liquids, such as liquid xenon.
In single-wall carbon nanotubes, excitons have both Wannier-Mott and Frenkel character. This is due to the nature of the Coulomb interaction between electrons and holes in one-dimension. The dielectric function of the nanotube itself is large enough to allow for the spatial extent of the wave function to extend over a few to several nanometers along the tube axis, while poor screening in the vacuum or dielectric environment outside of the nanotube allow for significant binding energies of 0.4 to 1.0 eV. GaAs, ZnS, ZnO, ZnTe, ZnSe, Cu2O, CuCl, CdTe, SiF4, and many others;Wannier-Mott excitons are typical for these materials.
Often there is more than one band to choose from for the electron and the hole leading to different types of excitons in the same material. Even high-lying bands can be effective as femtosecond two-photon experiments have shown.
Surface excitons
At surfaces it is possible for so called image states to occur, where the hole is inside the solid and the electron is in the vacuum. These electron hole pairs can only move along the surface.
Atomic and molecular excitons
Alternatively, an exciton may be thought of as an excited state of an atom, ion, or molecule, the excitation wandering from one cell of the lattice to another.
When a molecule absorbs a quantum of energy that corresponds to a transition from one molecular orbital to another molecular orbital, the resulting electronic excited state is also properly described as an exciton. An electron is said to be found in the lowest unoccupied orbital and an electron hole in the highest occupied molecular orbital, and since they are found within the same molecular orbital manifold, the electron-hole state is said to be bound. Molecular excitons typically have characteristic lifetimes on the order of nanoseconds, after which the ground electronic state is restored and the molecule undergoes fluorescence. Molecular excitons have several interesting properties, one of which is energy transfer (see Förster resonance energy transfer) whereby if a molecular exciton has proper energetic matching to a second molecule's spectral absorbance, then an exciton may transfer (hop) from one molecule to another. The process is strongly dependent on intermolecular distance between the species in solution, and so the process has found application in sensing and molecular rulers.
Dynamics
The probability of the hole disappearing (the electron occupying the hole) is limited by the difficulty of losing the excess energy, and as a result excitons can have a relatively long lifetime. (Lifetimes up to several milliseconds have been observed in copper (I) oxide) Another limiting factor in the recombination probability is the spatial overlap of the electron and hole wavefunctions (roughly the probability for the electron to run into the hole). This overlap is smaller for lighter electrons and holes and for highly excited hydrogenic states.
The whole exciton can move through the solid. With this additional kinetic energy the exciton may lie above the band-gap.
The exciton propagating through molecular crystal is one that is of greatest concern. Several mechanisms have been proposed in the literature. Two are important. The first one is exciton energy dissipated due to interaction with phonon bath. The other one is energy carried away by radiation. Combinations of the two have also been studied.
Much like molecular systems that have well defined resonances, excitons can undergo internal conversions from energetically higher lying states to lower lying states by coupling to vibrational or electronic degrees of freedom. Internal conversions usually take place of a time scale of a few to tens of femtoseconds. Also, intersystem crossings are possible when adequate spin orbit interactions are present in the material, and usually take place on a time scale of a few to hundreds of picoseconds.
Interaction
Excitons are the main mechanism for light emission in semiconductors at low temperature (when the characteristic thermal energy kT is less than the exciton binding energy), replacing the free electron-hole recombination at higher temperatures.
The existence of exciton states may be inferred from the absorption of light associated with their excitation. Typically, excitons are observed just below the band gap.
When excitons interact with photons a so-called polariton (also exciton-polariton) is formed. These excitons are sometimes referred to as dressed excitons.
Provided the interaction is attractive, an exciton can bind with other excitons to form a biexciton, analogous to a dihydrogen molecule. If a large density of excitons is created in a material, they can interact with one another to form an electron-hole liquid, a state observed in k-space indirect semiconductors.
Additionally, excitons are integer-spin particles obeying Bose statistics in the low-density limit. In some systems, where the interactions are repulsive, a Bose-Einstein condensed state is predicted to be the ground state, and indeed such condensate has been already observed in recent experiments.[5] The inference was obtained by cooling an exciton state below 5 K and further observing coherent light emission (with interference patterns) from it.
See also
References
- ^ Abbamonte Research Group, University of Illinois
- ^ Liang, W Y (1970). "Excitons". Physics Education. 5: 226. Bibcode:1970PhyEd...5..226L. doi:10.1088/0031-9120/5/4/003.
- ^ Frenkel, J. (1931). "On the Transformation of light into Heat in Solids. I". Physical Review. 37: 17. Bibcode:1931PhRv...37...17F. doi:10.1103/PhysRev.37.17.
- ^ Wannier, Gregory (1937). "The Structure of Electronic Excitation Levels in Insulating Crystals". Physical Review. 52: 191. Bibcode:1937PhRv...52..191W. doi:10.1103/PhysRev.52.191.
- ^ Coherent Exciton Matter, AIP Update 800, November 9, 2006 by Phil Schewe, Ben Stein, and Davide Castelvecchi