Carding

For other uses, see Carding (disambiguation).

Creating a rolag using hand cards.

Carding is a mechanical process that disentangles, cleans and intermixes fibers to produce a continuous web or sliver suitable for subsequent processing. This is achieved by passing the fibers between differentially moving surfaces covered with card clothing. It breaks up locks and unorganized clumps of fiber and then aligns the individual fibers to be parallel with each other. In preparing wool fiber for spinning, carding is the step that comes after teasing.

The word is derived from the Latin carduus meaning teasel, as dried vegetable teasels were first used to comb the raw wool. These ordered fibers can then be passed on to other processes that are specific to the desired end use of the fiber: Cotton, batting, felt, woollen or worsted yarn, etc. Carding can also be used to create blends of different fibers or different colors. When blending, the carding process combines the different fibers into a homogeneous mix. Commercial cards also have rollers and systems designed to remove some vegetable matter contaminants from the wool.

Common to all carders is card clothing. Card clothing is made from a sturdy flexible backing in which closely spaced wire pins are embedded. The shape, length, diameter, and spacing of these wire pins is dictated by the card designer and the particular requirements of the application where the card cloth will be used. A later version of the card clothing product developed during the latter half of the 19th century and found only on commercial carding machines, whereby a single piece of serrated wire was wrapped around a roller, became known as metallic card clothing.

Carding machines are known as cards. Fiber may be carded by hand for hand spinning.

History

A "Cotton carder". An old engraving copied from artist Pierre Sonnerat's 1782 illustration

Historian of science Joseph Needham ascribes the invention of bow-instruments used in textile technology to India. The earliest evidence for using bow-instruments for carding comes from India (2nd century CE). These carding devices, called kaman and dhunaki would loosen the texture of the fibre by the means of a vibrating string.

In 1748 Lewis Paul of Birmingham, England invented the hand driven carding machine. A coat of wire slips was placed around a card which was then wrapped around a cylinder. Daniel Bourn obtained a similar patent in the same year, and probably used it in his spinning mill at Leominster, but this burnt down in 1754. The invention was later developed and improved by Richard Arkwright and Samuel Crompton. Arkwright's second patent (of 1775) for his carding machine was subsequently declared invalid, because it lacked originality.

From the 1780s, the carding machines were set up in mills in the north of England and mid Wales. The first in Wales was in a factory at Dolobran near Meifod in 1789. These carding mills produced yarn particularly for the Welsh flannel industry.

By 1838, the Spen Valley, centered on Cleckheaton had at least 11 card clothing factories and by 1893 it was generally accepted as the card cloth capital of the world, though by 2008 only two manufacturers of metallic and flexible card clothing remained in England, Garnett Wire Ltd. dating back to 1851 and Joseph Sellers & Son Ltd established in 1840.

Baird from Scotland took carding to Leicester, Massachusetts in the 1780s. In the 1890s the town produced one-third of all hand and machine cards in North America.

The process

Cotton manufacturing processes Bale breaker Blowing room Willowing Breaker scutcher Batting Finishing scutcher Lapping Teasing Carding Carding room Sliver lap Combing Drawing Slubbing Intermediate Roving Fine roving Mule spinning Ring spinning Spinning Reeling Doubling Winding Bundling Bleaching Weaving shed Winding Beaming Cabling Warping Gassing Sizing/slashing/dressing Spooling Weaving Cloth Yarn (cheese) Bundle Sewing thread

Carding machine

Carding: the fibers are separated and then assembled into a loose strand (sliver or tow) at the conclusion of this stage.

The cotton comes off of the picking machine in laps, and is then taken to carding machines. The carders line up the fibers nicely to make them easier to spin. The carding machine consists mainly of one big roller with smaller ones surrounding it. All of the rollers are covered in small teeth, and as the cotton progresses further on the teeth get finer (i.e. closer together). The cotton leaves the carding machine in the form of a sliver; a large rope of fibers.

In a wider sense carding can refer to the four processes of willowing, lapping, carding and drawing. In willowing the fibers are loosened . In lapping the dust is removed to create a flat sheet or lap of fibers; Carding itself is the combing of the tangled lap into a thick rope or sliver of 1/2 inch in diameter, it can then be optionally combed, is used to remove the shorter fibers, creating a stronger yarn.

A Combing machine

In drawing a drawing frame combines 4 slivers into one. Repeated drawing increases the quality of the sliver allowing for finer counts to be spun. Each sliver will have thin and thick spots, and by combining several slivers together a more consistent size can be reached. Since combining several slivers produces a very thick rope of cotton fibers, directly after being combined the slivers are separated into rovings. These rovings (or slubbings) are then what are used in the spinning process.

For machine processing, a roving is about the width of a pencil. The rovings are collected in a drum and proceed to the slubbing frame which adds twist, and winds onto bobbins. Intermediate Frames are used to repeat the slubbing process to produce a finer yarn, and then the roving frames reduces it to a finer thread, gives more twist, makes more regular and even in thickness, and winds onto a smaller tube.

Hand carders

Irreler Bauerntradition shows carding, spinning and knitting in the Roscheider Hof Open Air Museum.

Hand cards are typically square or rectangular paddles manufactured in a variety of sizes from 2 by 2 inches (5.1 cm × 5.1 cm) to 4 by 8 inches (10 cm × 20 cm). The working face of each paddle can be flat or cylindrically curved and wears the card cloth. Small cards, called flick cards, are used to flick the ends of a lock of fibre, or to tease out some strands for spinning off.

A pair of cards is used to brush the wool between them until the fibers are more or less aligned in the same direction. The aligned fiber is then peeled from the card as a rolag. Carding is an activity normally done outside or over a drop cloth, depending on the wool's cleanliness. Rolag is peeled from the card.

Drum carders

Carding Llama hair with a hand-cranked drum carder

The simplest machine carder is the drum carder. Most drum carders are hand-cranked but some are powered by electric motor. These machines generally have two rollers, or drums, covered with card clothing. The licker-in, or smaller roller meters fiber from the infeed tray onto the larger storage drum. The two rollers are connected to each other by a belt- or chain-drive so that the their relative speeds cause the storage drum to gently pull fibers from the licker-in. This pulling straightens the fibers and lays them between the wire pins of the storage drum's card cloth. Fiber is added until the storage drum's card cloth is full. A gap in the card cloth facilitates removal of the batt when the card cloth is full.

Some drum carders have a soft-bristled brush attachment that presses the fiber into the storage drum. This attachment serves to condense the fibers already in the card cloth and adds a small amount of additional straightening to the condensed fiber.

Cottage carders

Cottage carding machines differ significantly from the simple drum card. These carders do not store fiber in the card cloth as the drum carder does but, rather, fiber passes through the workings of the carder for storage or for additional processing by other machines.

A typical cottage carder has a single large drum (the swift) accompanied by a pair of in-feed rollers (nippers), one or more pairs of worker and stripper rollers, a fancy, and a doffer. In-feed to the carder is usually accomplished by hand or by conveyor belt and often the output of the cottage carder is stored as a batt or further processed into roving and wound into bumps with an accessory bump winder. The cottage carder in the image below supports both outputs.

Raw fiber, placed on the in-feed table or conveyor is moved to the nippers which restrain and meter the fiber onto the swift. As they are transferred to the swift, many of the fibers are straightened and laid into the swift's card cloth. These fibers will be carried past the worker / stripper rollers to the fancy.

As the swift carries the fibers forward, from the nippers, those fibers that are not yet straightened are picked up by a worker and carried over the top to its paired stripper. Relative to the surface speed of the swift, the worker turns quite slowly. This has the effect of reversing the fiber. The stripper, which turns at a higher speed than the worker, pulls fibers from the worker and passes them to the swift. The stripper's relative surface speed is slower than the swift's so the swift pulls the fibers from the stripper for additional straightening.

Straightened fibers are carried by the swift to the fancy. The fancy's card cloth is designed to engage with the swift's card cloth so that the fibers are lifted to the tips of the swift's card cloth and carried by the swift to the doffer. The fancy and the swift are the only rollers in the carding process that actually touch.

The slowly turning doffer removes the fibers from the swift and carries them to the fly comb where they are stripped from the doffer. A fine web of more or less parallel fiber, a few fibers thick and as wide as the carder's rollers, exits the carder at the fly comb by gravity or other mechanical means for storage or further processing.

Cottage Carder

• 
  Using a Cottage Carder to Card White Alpaca. See schematic at right.
• 
  Diagram showing name, location, and rotation of rollers used on a cottage carder

Historical Carding Machines

• 
  A restored carding machine at Quarry Bank Mill in the UK
• A wool carder from 1913 at the Mueller Tuchfabrik,Euskirchen
• 
  19th-century ox-powered double carding machine

General information

A carding machine in Haikou, Hainan Province, China

This product (rovings, rolags, and batts) can be used for spinning.

Carding of wool can either be done "in the grease" or not, depending on the type of machine and on the spinner's preference. "In the grease" means that the lanolin that naturally comes with the wool has not been washed out, leaving the wool with a slightly greasy feel. The large drum carders do not tend to get along well with lanolin, so most commercial worsted and woolen mills wash the wool before carding. Hand carders (and small drum carders too, though the directions may not recommend it) can be used to card lanolin rich wool. A major benefit of working with the lanolin still in the wool is that it leaves the worker with soft hands.

See also

• Cotton mill
• Cotton-spinning machinery
• Doubling (textiles)
• Dref Friction Spinning
• Open end spinning
• Spinning
• Spinning wheel
• Textile manufacture during the Industrial Revolution
• Textile manufacturing
• Timeline of clothing and textiles technology

Bibliography

• Collier, Ann M (1970), A Handbook of Textiles, Pergamon Press, p. 258, ISBN 0-08-018057-4
• Hills, Richard Leslie (1993), Power from Steam: A History of the Stationary Steam Engine, Cambridge University Press, p. 244, ISBN 978-0-521-45834-4, retrieved January 2009 {{citation}}: Check date values in: |accessdate= (help)CS1 maint: extra punctuation (link)

External links

• What is Carding - Brief explanation of hand carding and what is needed.
• "How To Use Hand Carders - Includes video tutorials". Retrieved 2011-10-16.