.50 BMG
.50 BMG | ||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | ||||||||||||||||||||||||
Type | Rifle | |||||||||||||||||||||||
Place of origin | United States | |||||||||||||||||||||||
Service history | ||||||||||||||||||||||||
In service | 1914 to present | |||||||||||||||||||||||
Used by | United States Military, British Military | |||||||||||||||||||||||
Wars | WWI, WWII, Korean War, Vietnam War, Falklands war, Gulf War, War on Terror, Iraq War | |||||||||||||||||||||||
Production history | ||||||||||||||||||||||||
Designer | John Browning | |||||||||||||||||||||||
Specifications | ||||||||||||||||||||||||
Case type | Rimless, bottleneck | |||||||||||||||||||||||
Bullet diameter | .511 in (13.0 mm) | |||||||||||||||||||||||
Neck diameter | .560 in (14.2 mm) | |||||||||||||||||||||||
Shoulder diameter | .741 in (18.8 mm) | |||||||||||||||||||||||
Base diameter | .804 in (20.4 mm) | |||||||||||||||||||||||
Rim diameter | .804 in (20.4 mm) | |||||||||||||||||||||||
Case length | 3.91 in (99 mm) | |||||||||||||||||||||||
Overall length | 5.45 in (138 mm) | |||||||||||||||||||||||
Primer type | Proprietary | |||||||||||||||||||||||
Filling weight | 289 gr. (water) | |||||||||||||||||||||||
Ballistic performance | ||||||||||||||||||||||||
| ||||||||||||||||||||||||
Test barrel length: 45 in Source(s): Ammoguide.com |
The .50 Browning Machine Gun (12.7 × 99 mm NATO) or .50 BMG is a cartridge developed for the Browning .50 Caliber machine gun in the late 1910s. Entering service officially in 1921, the round is based on a greatly scaled-up .30-'06 cartridge. The cartridge itself has been made in many variants: multiple generations of regular ball, tracer, armor piercing, incendiary, and saboted sub-caliber rounds. The rounds intended for machine guns are linked using metallic links.
The .50 BMG cartridge is also used in long-range target and sniper rifles, as well as other .50 machine guns. The use in single-shot and semi-automatic rifles has resulted in many specialized match-grade rounds not used in .50 machine guns. A McMillan TAC-50 .50BMG sniper rifle was used by Canadian Corporal Rob Furlong to bring off the longest-range confirmed sniper kill in history, when he shot a Taliban insurgent at 2,430 metres (2,657 yards/7,972 feet/1.509 miles) during the 2002 campaign in Afghanistan.[1]
A wide variety of ammunition is available, and the availability of match grade ammunition has increased the usefulness of .50 caliber rifles by allowing more accurate fire than lower quality rounds.
History
The round was conceptualized during WWI by John Browning in response to a requirement for an anti-aircraft weapon. The round itself is based on a scaled-up .30-06 Springfield design, and the machine gun was based on a scaled-up M1919/M1917 design that Browning had initially developed at the turn of century (but which was not adopted by the U.S. military until 1917, hence the model designation). The new heavy machine gun, the Browning M2 .50 caliber machine gun, was used heavily in aircraft, especially during World War II, though its airborne use is limited to helicopters at present. It was and still is used on the ground as well, both vehicle mounted, in fixed fortifications and on occasion carried by infantry. The incendiary rounds were especially good against aircraft, and AP rounds for destroying concrete bunkers, structures, and lighter AFVs.
The development of the .50 round is sometimes confused with the German 13.2 mm TuF, which was developed by Germany for an anti-tank rifle to combat British tanks during WWI. However, the development of the U.S. .50 round was started before this later German project was completed or even known to the Allied countries. When word of the German anti-tank round spread, there was some debate as to whether it should be copied and used as a base for the new machine gun cartridge. However, after some analysis the German ammunition was ruled out, both because performance was inferior to the modified Springfield .30-06 round and because it was a semi-rimmed cartridge, making it sub-optimal for an automatic weapon. The round's dimensions and ballistic traits are different. The M2 would, however, go on to function as an anti-armour machine gun, and decades later, be used in high-powered rifles. The concept of a .50 machine gun was not an invention of this era; this caliber (.50) had been used in Maxim machine guns and in a number of manual machine guns such as the Gatling.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f1/M2Round.jpg/220px-M2Round.jpg)
During World War II it found use in penetrating lightly armoured vehicles, including aircraft. An upgraded variant of the Browning machine gun used during World War II is still in use today as the well known M2 machine gun. Since the mid-1950s, some armoured personnel carriers and utility vehicles have been made to withstand 12.7 mm machine gun fire, thus making it a much less flexible weapon. It still has more penetrating power than light machine guns such as general purpose machine guns, but is difficult to maintain and aim in field conditions. Its range and accuracy, however, are superior to light machine guns when fixed and water cooled, and has not been replaced as the standard caliber for western vehicle mounted machine guns (Soviet and CIS armoured vehicles mount 12.7 mm DShK, NSV, which are ballistically very similar to the .50 BMG, or 14.5 mm KPV machine guns, which have significantly superior armour penetration compared to any 12.7 mm round).
The Barrett M82 SASR .50 Caliber rifle and later variants were born during the 1980s and have upgraded the anti-materiel power of the military sniper. A skilled sniper can effectively neutralize an infantry unit by picking off several soldiers at a very long range, without revealing his precise location, then spend a few hours moving to a new position (whether the infantry unit decides to hunt down the sniper or to retreat), before firing again.
The round is different from the one used in the Boys anti-tank rifle, developed in the 1930s in Britain, which used a belted design and a slightly larger-diameter bullet, .55 Boys (13.9 x 99B).
Power
A common method for understanding the actual power of a cartridge is by comparing muzzle energies. The Springfield .30-06, the standard caliber for American soldiers in World War II and a popular caliber amongst American hunters, can produce muzzle energies between 2000 and 3000 foot pounds of energy (between 3 and 4 kilojoules). A .50 BMG round can produce between 10,000 and 13,000 foot pounds (between 14 and 18 kilojoules) or more, depending on its powder and bullet type, as well as the rifle it was fired from. Due to the high ballistic coefficient of the bullet, the .50 BMG's trajectory also suffers less "drift" from cross-winds than smaller and lighter calibers, making the .50 BMG a good choice for high powered sniper rifles.
Cartridge dimensions
The 50 BMG 12.7 x 99 NATO has 290 grain H2O cartridge case capacity. The round is a scaled up version of the .30-06 Springfield but uses a case wall with a long taper to facilitate feeding and extraction in various weapons.
50 BMG basic cartridge dimensions. All sizes in inches (in). The common rifling twist rate for this cartridge is 1 in 15 in (381 mm), with 8 lands and grooves. The primer type specified for this ammunition is boxer primer but some were produced with berdan primer.
Average chamber pressure in for this round as listed in TM43-0001-27[1], the US Army Ammunition Data Sheets - Small Caliber Ammunition, not including plastic practice, short cased spotter, or proof/test loads, is 54,923 PSI (378 MPa or 3787 bar). The proof/test pressure is listed as 65,000 psi (448 MPa or 4,482 bar). As a note these are the military machine gun standards and not ideal for use as guidelines in reloading or personal use.
US Military cartridge types
NOTE: .50 BMG cartridges are also produced commercially with a plethora of different bullets and to a number of different specifications.
- Cartridge, Caliber .50, Tracer, M1
- Tracer for observing fire, signaling, target designation, and incendiary purposes. The M1 has a red tip.
- Cartridge, Caliber .50, Incendiary, M1
- This cartridge is used against unarmored, flammable targets. The incendiary bullet has a light blue tip.
- Cartridge, Caliber .50, Ball, M2
- This cartridge is used against personnel and unarmored targets.
- Cartridge, Caliber .50, Armor-Piercing, M2
- This cartridge is used against lightly armored vehicles, protective shelters, and personnel, and can be identified by its black tip.
- Cartridge, Caliber .50, Armor-Piercing-Incendiary, M8
- This cartridge is used, in place of the armor piercing round, against armored, flammable targets. The bullet is colored with silver tip.
- Cartridge, Caliber .50, Tracer, M10
- Tracer for observing fire, signaling, target designation, and incendiary purposes. Designed to be less intense than the M1, the M10 has an orange tip.
- Cartridge, Caliber .50, Tracer, M17
- Tracer for observing fire, signaling, target designation, and incendiary purposes. Can be fired from the M82/M107 series of rifles.
- Cartridge, Caliber .50, Armor-Piercing-Incendiary-Tracer, M20
- This cartridge is used, in place of the armor piercing round, against armored, flammable targets, with a tracer element for observation purposes. The tip of the bullet is colored red with a ring of aluminum paint. This cartridge is effectively a variant of the M8 Armor-Piercing Incendiary with the added tracer element. Can be fired from the M82/M107 series of rifles.
- Cartridge, Caliber .50, Tracer, Headlight, M21
- Tracer for use in observing fire during air-to-air combat. Designed to be more visible, the M21 is 3 times more brilliant than the M1 tracer.
- Cartridge, Caliber .50, Incendiary, M23
- This cartridge is used against unarmored, flammable targets. The tip of the bullet is painted blue with a light blue ring.
- Cartridge, Caliber .50, Ball, M33
- This cartridge is used against personnel and unarmored targets. Can be fired from the M82/M107 series of rifles.
- Cartridge, Caliber .50, Saboted Light Armor Penetrator, M903
- This is a Saboted Light Armor Penetrator (SLAP) round, which uses a smaller 355-360 grain bullet fitted in an amber colored plastic sabot. For use only in the M2 series of machine guns.
- Cartridge, Caliber .50, Saboted Light Armor Penetrator-Tracer, M962
- Like the M903, this is a Saboted Light Armor Penetrator (SLAP) round, with the only difference being that the M962 also has a tracer element for observing fire, target designation, and incendiary purposes. Uses a red colored plastic sabot for indentification. For use only in the M2 series of machine guns.
- Cartridge, Caliber .50, Ball, XM1022
- A long-range match cartridge specifically designed for long range work using the M107 rifle.
- A so-called "combined effects" cartridge, the Mk 211 Mod 0 High-Explosive-Incendiary-Armor-Piercing (HEIAP) cartridge contains a .30 caliber tungsten penetrator, zirconium powder, and Composition A explosive. Cartridge is identified by a green tip with a grey ring, and can be used in any .50 caliber weapon in US inventory with the exception of the M85 machine gun.
- Cartridge, Caliber .50, Armor-Piercing-Incendiary-Tracer, Mk 300 Mod 0
- As with the Mk 211 Mod 0, but with a tracer component. Cartridge is identified by an unknown coloring, and likely can be used in any .50 caliber weapon in US inventory with the exception of the M85 machine gun, as with the Mk 211 Mod 0.
Legal issues
The specified maximum diameter of an unfired .50 BMG bullet is .510 inch; while this appears to be over the .50 inch (12.7 mm) maximum allowed for non-sporting Title I small arms under the U.S. National Firearms Act, the barrel of a .50 BMG rifle is only .50 inches across the rifling lands, and slightly larger in the grooves. The oversized bullet is formed to the bore size upon firing, forming a tight seal and engaging the rifling, a mechanism which in firearms terms is known as engraving. Subject to political controversy due to the great power of the cartridge (it is the most powerful commonly available cartridge not considered a destructive device under the National Firearms Act), it remains popular among long-range shooters for its accuracy and external ballistics. While the .50 BMG round is able to deliver accurate shot placement (if match grade ammunition is used) at ranges over 1,000 yards (900 m), smaller caliber rifles produce better scores and tighter groups in 1000 yard competitions.
Since the adoption of .50 BMG rifles by military sniper units, there has been a growing gun control movement in some states, including California, New York, Massachusetts, Hawaii, and Illinois, to ban civilian possession of .50 BMG rifles and ammunition. Bill AB50 in California, passed in 2004, known as the .50 Caliber BMG Regulation Act of 2004 classifies all .50 BMG rifles of any action type as assault weapons, which are illegal to import into the state or transfer to any but a state agency or dealer licensed to purchase them. The bill's sponsor, California Assemblyman Paul Koretz, claimed that the .50 BMG "would be an ideal choice for use in an act of terrorism." However, it is considered by some gun experts to be a poor choice because of its size, weight and cost. The considerable size and weight of .50 BMG rifles, high cost, and lack of concealability make them a poor choice for criminal use. With lengths usually between four and five feet and weighing 20-40 pounds (a large .50 caliber rifle weighs slightly less than an olympic sized barbell), they are unwieldy and difficult to conceal.
After AB50 was passed, Barrett proceeded to cease sales and service of .50 BMG rifles to California law enforcement agencies. An official press release from the owner of Barrett Firearms can be found on the company's website, as follows: "The California legislature has banned the .50 BMG from the good citizens of the state of California, violating their rights and the constitution of our republic. Therefore, Barrett will not sell to or service any California government agencies."
In response to legal action against the .50 BMG in the United States and Europe, an alternative chambering was developed. The .510 DTC Europ uses the same bullet, but has slightly different case dimensions. .510 DTC cases can be made by fire-forming .50 BMG cases. The new round has almost identical ballistics, but because of the different dimensions, rifles chambered for the .50 BMG cannot fire the .510 DTC, and therefore do not fall under many of the same legal prohibitions. Barrett offers a similar alternative, the .416 Barrett, which is based on a shortened .50 BMG case necked down to .416 caliber (10.3 mm).
The primary civilian users of .50 caliber rifles, which range in price from around USD$1,800[2] for single shot models to nearly USD$8,000[3] for the Barrett M82A1, are long-range target shooters; the Fifty Caliber Shooters Association, for instance, holds .50 BMG shooting matches nationwide.[4]
The U.S. Coast Guard uses .50 BMG weapons for drug interdictions. Effective interdiction requires that personnel on Coast Guard cutters be able to deliver accurate fire to stop high-speed drug runners. Similarly, .50 BMG weapons have attracted attention from law enforcement agencies; they have been adopted by the NYPD. If it becomes necessary to immobilize a vehicle, a .50 BMG round in the engine block will shut it down quickly. If it is necessary to breach barriers, a .50 BMG round will penetrate most commercial brick walls and concrete cinder blocks.
Partial list of .50 BMG weapons
Carbine rifles:
- Barrett M82CQ (a carbine version of the M82A3)
- Barrett M107
- L.A.R. Manufacturing, Inc. Grizzly Big Boar
- McMillan TAC-50
- Zastava Arms M93 Black Arrow
See also
- .50 caliber handguns
- 12 mm caliber
- 12.7 x 107 mm
- 14.5 x 114 mm
- List of firearms
- List of rifle cartridges
- Raufoss Mk211
- .510 DTC Europ
- Gun (Firearm) laws in the United States (by state)
- Firearm errors in media
- .50 Caliber BMG Regulation Act of 2004
External links
- 50 Caliber Shooter's Association: Dedicated to the Sporting Uses of the .50 BMG
- Fifty Caliber Shooter's Association UK: Dedicated to UK .50 BMG target shooters
- Fifty Caliber Institute page on California AB50, with secondary sources
- Message from Ronnie Barrett, regarding legal issues surrounding his rifles
- TM43-0001-27 US Army Ammunition Data Sheets - Small Caliber Ammunition, HQ Department of the Army, 6/81, Including changes (DANGER! Not to be used as reloading data)
References