Jump to content

Registered training organisation

Add links
From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by 119.74.238.54 (talk) at 09:04, 5 August 2023 (→Australian Skills Quality Authority: anchor). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)

A registered training organisation (RTO), in Australia, is an organisation providing Vocational Education and Training (VET) courses to students, resulting in qualifications or statements of attainment that are recognised and accepted by industry and other educational institutions throughout Australia.

Australia-wide

[edit]

There are almost 5,000 RTOs in Australia, providing training across a wide range of subject areas including traditional trades, advanced technical training, para-professional and professional studies, as well as pre-employment and basic skills programs.[1][2]

RTOs may be government (state or territory) or privately owned organisations. All RTOs in Australia and the qualifications they are registered to deliver are listed on the training.gov.au website, a national register that replaced the National Training Information Service (NTIS) in 2011.[3]

To become registered as an RTO, an organisation must apply to the regulatory body in the jurisdiction it falls. Depending on the organisation's main location and the student cohorts to whom it intends to provide training and assessment services, its regulatory body will be:

  • the Australian Skills Quality Authority (ASQA)
  • the Victorian Registration and Qualifications Authority (VRQA), or
  • the Training and Accreditation Council of Western Australia (TACWA).

Australian Skills Quality Authority

[edit]

The Australian Skills Quality Authority (ASQA) is the regulatory body for RTOs in:

  • the Australian Capital Territory
  • New South Wales
  • the Northern Territory
  • South Australia
  • Tasmania, and
  • RTOs in Victoria and Western Australia that offer courses to overseas students, and/or offer courses to students in states other than Victoria or Western Australia, including online courses.

To become registered to deliver Vocational Education and Training in any state or territory outside of Western Australia and Victoria, or to overseas students, an organisation must meet a range of mandatory requirements, including:

Organisations must also meet additional requirements when:

Vocational Education and Training (VET) Quality Framework

[edit]

Organisations registered under ASQA's jurisdiction must comply with the requirements of the VET Quality Framework (VQF), which has the following components:

  1. The Standards for Registered Training Organisations (RTOs) 2015, which came into effect for new RTOs on 1 January 2015 and for existing RTOs on 1 April 2015. All RTOs within Australia that fall under the jurisdiction of ASQA must comply with the standards at all times as a condition of their registration.[4]
  2. The Financial Viability Risk Assessment Requirements 2011. These requirements are designed to ensure that organisations generate sufficient income to meet operating expenses while delivering quality training and assessment services.[5]
  3. The Data Provision Requirements 2012. Periodically, RTOs must submit data compliant with the Australian Vocational Education and Training Management Information Statistical Standard (AVETMISS). This includes information about students, their courses and qualifications completed, and provides the mechanism for national reporting about the VET system.[6]
  4. The Australian Qualifications Framework (AQF) is a national policy for regulated qualifications within the Australian education and training system, including VET and higher education. It provides learning outcomes for each level and qualification type, in a taxonomic structure designed to enable consistency in the way in which qualifications are described as well as clarity about the differences and relationships between qualification types.[7][8]

Victorian Registration and Qualifications Authority (VRQA)

[edit]

To apply for registration as an RTO with the VRQA, an organisation must have its principal place of business within Victoria, and only deliver VET to students within Victoria or Western Australia. Organisations must be able to demonstrate compliance with:

  1. The principal purpose requirement. From 1 January 2012, the legal entity of an applicant for registration must have the principal purpose of providing education and training.
  2. The VRQA Guidelines for VET Providers.[9]
  3. Requirements under the Australian Quality Training Framework (AQTF). The AQTF is a set of standards to assure nationally consistent, quality training and assessment services within Australia's VET system.[10][11]

Training and Accreditation Council (TAC) of Western Australia

[edit]

Within Western Australia, TAC will only accept applications from organisations that deliver and assess within Western Australia and Victoria only, and that have their head office located in Western Australia.

Organisations must demonstrate a thorough working knowledge of the Australian VET system and comply with:

  1. The Australian Quality Training Framework (AQTF) Essential Conditions and Standards for Initial Registration.
  2. The Vocational Education and Training Act 1996.[12]
  3. Other relevant state and Commonwealth legislation and licensing requirements.
  4. All policies for RTOs issued by TAC.[13]

Maintaining registration

[edit]

To maintain national registration, ASQA-regulated RTOs must continue to comply with the VET Quality Framework as well as any further conditions that may have been imposed by ASQA.[14]

To ensure compliance with these obligations, ASQA conducts two types of audits:

  1. Registration audits, conducted on receipt of an application for initial registration as an RTO, or in some cases on renewal of registration or when applying to change scope of registration.
  2. Compliance audits, conducted within two years of initial registration or if it has been determined that there is a risk that the RTO will fail to comply with relevant standards.[15]

To maintain registration, TAC- and VRQA-regulated RTOs must continue to comply with relevant standards. Quality audits are conducted:

  1. When initiated by clients: at initial registration, renewal of registration and when amending scope.
  2. When initiated by TAC or VRQA: within 12 months of initial registration, in response to complaints, to monitor compliance and when strategic industry audits are required.[16][17]

See also

[edit]

References

[edit]
  1. ^ Australian Bureau of Statistics. "Topics @ a Glance - Vocational Education and Training". www.abs.gov.au.
  2. ^ "About RTOs | Australian Skills Quality Authority". asqa.gov.au. Archived from the original on 5 January 2016. Retrieved 7 January 2016.
  3. ^ Department of Industry on behalf of State and Territory Governments. "training.gov.au". training.gov.au.
  4. ^ Australian Skills Quality Authority. "Standards for Registered Training Organisations (RTOs) 2015". comlaw.gov.au. Australian Government. Archived from the original on 18 February 2015. Retrieved 30 January 2015.
  5. ^ "Financial Viability Risk Assessment Requirements 2011". www.comlaw.gov.au. Australian Government. Archived from the original on 30 December 2014. Retrieved 30 January 2015.
  6. ^ Department of Industry, Innovation, Climate Change, Science, Research and Tertiary Education. "Data Provision Requirements 2012". www.comlaw.gov.au. Australian Government. Archived from the original on 25 February 2015. Retrieved 30 January 2015.{{cite web}}: CS1 maint: multiple names: authors list (link)
  7. ^ "Australian Qualifications Framework". aqf.edu.au. Archived from the original on 4 February 2015. Retrieved 30 January 2015.
  8. ^ Australian Skills Quality Authority. "Understand the requirements for registration". asqa.gov.au. Archived from the original on 6 February 2015. Retrieved 30 January 2015.
  9. ^ Victorian Registration and Qualifications Authority. "VRQA Guidelines for VET Providers" (PDF). vrqa.vic.gov.au. Archived (PDF) from the original on 12 March 2015. Retrieved 30 January 2015.
  10. ^ Victorian Registration and Qualifications Authority. "Registration Requirements". vrqa.vic.gov.au. State Government Victoria. Archived from the original on 1 March 2015. Retrieved 30 January 2015.
  11. ^ Australian Skills Quality Authority, Victorian Registration and Quality Authority, Training and Accreditation Council. "AQTF Essential Conditions and Standards for Initial Registration" (PDF). vrqa.vic.gov.au. Archived (PDF) from the original on 17 March 2015. Retrieved 30 January 2015.{{cite web}}: CS1 maint: multiple names: authors list (link)
  12. ^ Department of the Premier and Cabinet. "Vocational Education and Training Act 1996". slp.wa.gov.au. Government of Western Australia. Archived from the original on 10 August 2015. Retrieved 30 January 2015.
  13. ^ Training and Accreditation Council. "Pre-registration requirements". tac.wa.gov.au. Government of Western Australia. Archived from the original on 10 August 2015. Retrieved 30 January 2015.
  14. ^ Australian Skills Quality Authority. "Meet the requirements of ongoing registration". asqa.gov.au. Archived from the original on 6 February 2015. Retrieved 30 January 2015.
  15. ^ Australian Skills Quality Authority. "Prepare for an Audit". asqa.edu.au. Archived from the original on 6 February 2015. Retrieved 30 January 2015.
  16. ^ Training and Accreditation Council. "Audits". tac.wa.gov.au. Archived from the original on 16 January 2015. Retrieved 30 January 2015.
  17. ^ Victorian Registration and Qualifications Authority. "Audit processes". vrqa.vic.gov.au/. Archived from the original on 1 March 2015. Retrieved 30 January 2015.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Registered_training_organisation&oldid=1168830715"