Jump to content

DB Class 66

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Andy Dingley (talk | contribs) at 12:27, 10 August 2018 (removed Category:1′C2′h2t locomotives; added Category:1′C2′ h2t locomotives using HotCat). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

DB Class 66
Locomotive 66 002 in Bochum-Dahlhausen
Type and origin
BuilderHenschel
Build date1955
Total produced2
Specifications
Configuration:
 • Whyte2-6-4T
 • UIC1′C2′ h2t
Gauge1,435 mm (4 ft 8+12 in)
Leading dia.1,000 mm (3 ft 3+38 in)
Driver dia.1,600 mm (5 ft 3 in)
Trailing dia.850 mm (2 ft 9+12 in)
Length:
 • Over buffers14,750 mm (48 ft 4+34 in)
Axle load15.8 t (15.6 long tons; 17.4 short tons)
Adhesive weight47.1 t (46.4 long tons; 51.9 short tons)
Service weight93.4 t (91.9 long tons; 103.0 short tons)
Firebox:
 • Grate area1.96 m2 (21.1 sq ft)
Boiler pressure16 bar (1.60 MPa; 232 psi)
Heating surface87.46 m2 (941.4 sq ft)
Superheater:
 • Heating area45.13 m2 (485.8 sq ft)
CylindersTwo, outside
Cylinder size470 mm (18+12 in)
Piston stroke660 mm (26 in)
Performance figures
Maximum speed100 km/h (62 mph)
Indicated power861 kW (1,155 hp)
Career
NumbersDB 66 001–002
Retired1968

The DB Class 66 (German: Baureihe 66) was a class of two Deutsche Bundesbahn (DB) locomotives designed for fast goods train and passenger train services on the main and branch lines of Deutsche Bundesbahn (DB), the national railway of the former West Germany.

History

The Class 66 were one of several newly designed locomotive classes, the so-called Neubauloks, built for the DB after the Second World War. The 66s had a top speed of 100 km/h and an axle load of only 15 tonnes which made them ideally suited to such duties. They were intended to replace the former state railway (Länderbahn) locomotives of DRG classes 38.10 (ex-Prussian P 8), 78 (ex-Prussian T 18) and 93 (ex-Prussian T 14). However increasing competition from diesel locomotives meant that no more engines were built after the two prototype, even though they fully met all expectations and were a very successful design. The Class 66 was the penultimate locomotive class to be built as part of the DB's Neubaulok construction programme.

Design

The engines were equipped with a welded, high-performance boiler with a combustion chamber, roller bearings, a mixer preheater and a welded plate frame. Because great emphasis was placed on the working conditions for the engine driver and stoker, the Class 66 had a fully enclosed driver's cab, skylights, floor heating and upholstered seats with back rests. From autumn 1967 both engines were fitted equipment for working push-pull services.

Locomotive number 66 001 was retired in 1967 due to damage to its drive, and stored at Gießen; the second engine was retired in 1968.

Preservation

DB 66 002 at the Bochum-Dahlhausen Railway Museum (1982)

Locomotive 66 002 was bought after its retirement by the German Railway History Company (Deutsche Gesellschaft für Eisenbahngeschichte or DGEG) and is currently (2007) homed in Bochum-Dahlhausen Railway Museum.

See also

Sources

  • Modelleisenbahner: Prestige Projekt - 66.002. Mai 2007, Seite 26 - 29