7.62 cm Pak 36(r)

7.62 cm Feldkanone 36(russisch) and Panzerabwehrkanone 36(russisch)
FK 36(r) anti-tank gun, displayed on the grounds of CFB Borden.
Type	Anti-tank gun
Place of origin	Nazi Germany
Service history
Used by	Nazi Germany
Wars	World War II
Production history
No. built	560 ?
Specifications
Mass	1,710 kg (3,770 lbs)
Barrel length	Overall: 3.8 m (12 ft 6 in) L/51.2 (without muzzle brake) Bore: 3.68 m (12 ft 1 in) L/48.4
Crew	6
Shell	Russian: 76.2 x 385 mm R German: 75 x 714 mm R
Caliber	76.2 mm (3 in)
Breech	Vertical sliding-block
Recoil	Hydro-pneumatic
Carriage	Split trail
Elevation	-6° to 18°
Traverse	60°
Rate of fire	10-12 rounds per minute

The 7.62 cm FK 36(r) and Pak 36(r) (7.62 cm Feldkanone (Field gun)/36 (russisch) and Panzerabwehrkanone (Anti-tank gun) 36(russisch)) were German anti-tank guns used by the Wehrmacht in World War II. The first guns were conversions of the Soviet 76 mm divisional gun M1936 (F-22). Later in the war, the Soviet USV and ZiS-3 76 mm divisional guns were also converted.

Description

The FK36(r) and Pak 36(r) both had a split-trail carriage, with a transverse leaf spring axle suspension, and steel wheels, with foam rubber filled tires. The guns were equipped with a semi-automatic vertical breech block; the recoil mechanism consisted of a hydraulic recoil buffer and a hydropneumatic recuperator. There was no limber; therefore the gun could not be towed by a horse team.

Development history

Soon after the German invasion of the USSR in 1941, Wehrmacht units encountered new Soviet tanks: the medium T-34 and the heavy KV. The thick sloped armor of these vehicles gave them a good degree of protection against German anti-tank weapons. The situation eventually led to requests for more powerful guns that would be able to destroy them from long range. Germany already had a suitable design, the 7.5 cm Pak 40, entering production in late 1941, but the first pieces were not delivered until 1942. Until enough of these could be manufactured, expedient solutions were required.

In the early stages of Operation Barbarossa, the Germans captured a large number (approximately 1,300) of Soviet 76-mm divisional guns model 1936 (F-22). Developed with anti-tank abilities in mind, this Soviet gun had powerful ballistics; it was also originally intended to use a more powerful cartridge than the one eventually adopted. However, the design had some shortcomings in the anti-tank role: the shield was too high, the two man laying was inconvenient and the sighting system was more suitable for the F-22's original divisional field gun role. Using considerable thrift, German engineers were able to quickly modify the F-22, which by that time had been adopted in original form as the FK296(r) by the Wehrmacht. In late 1941, German engineers developed a modernization program. The initial modifications that brought the guns to FK36(r) standard included:

• removing the top section of the shield and using the armour off-cuts to superimpose over the lower section of the shield. These were held in place using the standard Pak38 shield pintles.
• re-orienting the traverse gear box and handwheel shaft linkages so as to mount the traverse handwheel on the left side of the gun next to the sight. As the new transverse rod linkage went through a gap in the recoil cradle's elevation arc, the maximum elevation angle was limited to 18 degrees.
• replacing the Russian sight with a Pak 38 style anti-tank sighting block that could mount the standard ZF3x8 sighting telescope or an emergency fold out iron sight. Like the Pak 40 and Pak 97/38, the sight mount had provision for attaching an indirect sighting device - the Aushilfsrichtmittel 38 (ARM38).

The first of these converted F-22s retained the original Russian ammunition (confirmed by measuring the chamber length of 15.2 inches or 385 mm) and were still designated FK296(r) on the sight's range drum. These early anti-tank conversions are discernible as they have not been fitted with a muzzle brake. These intermediate guns had various designations, but appear mainly to have been referred to as "FK36(r)", despite their dedicated anti-tank role seeming to warrant the designation "Pak" rather than "FK". The conversion work was performed by HANOMAG, with sight blocks made by Kerner & Co in 1942 (ggn42).

Later upgrades were designated as the Pak36(r), and:

• Were rechambered for the more powerful German Pak40 cartridge - which was nearly twice as long as the Soviet one (715 mm vs 385.3 mm) and also wider (100 mm vs 90 mm), resulting in 2.4 times the propellant load; and
• Had recoil mechanism adjustments to accommodate the new recoil characteristics.

Production

The first guns were delivered in February 1942. By the end of 1942, the Germans had converted 358 pieces, with another 169 in 1943 and 33 in 1944. Additionally, 894 barrels were prepared for use in self-propelled guns. It is likely that these numbers include Pak 39(r), a similarly upgraded 76-mm M1939 (up to 300 pieces).

Production of the ammunition for PaK 36(r) and PaK 39(r)
Shell type	1942	1943	1944	Total
HE-Frag	769,400	1,071,300	857,700	2,698,400
AP, all types	359,400	597,300	437,300	1,394,000

Employment

The FK36(r) and PaK 36(r) saw combat on the Eastern Front and in North Africa. The first employment of the FK36(r) was noted as early as March 1942 at Bir Hacheim in Libya; and, by May 1942, 117 are recorded as being in use by the Afrika Korps. The gun was well proven in combat, as demonstrated by Gunner Günter Halm (Knights Cross), who destroyed nine Valentine Tanks in a single action. The Pak 36(r) was used later in the North African campaign. The gun was actively used in both anti-tank and field artillery roles until the end of the war. As late as March 1945, the Wehrmacht still possessed 165 Pak 36(r) and Pak 39(r). The scale of use can be illustrated by the amount of ammunition consumed: 49,000 AP and 8,170 subcaliber AP shells in 1942, and 151,390 in 1943. For the sake of comparison, in 1942 the Pak 40 fired 42,430 AP and 13,380 HEAT shells; in 1943 the numbers grew significantly, to 401,100 AP and 374,000 HEAT.

The modernized barrels were also mounted in the following self-propelled guns:

• 7.62 cm Pak 36(r) auf Pz.IID Marder II (Sd.Kfz.132) - lightly armoured tank destroyer on a Panzer II light tank chassis.
• 7.62 cm Pak 36(r) auf Pz.38(t) Marder III (Sd.Kfz.139) - lightly armoured tank destroyer on a Panzer 38(t) light tank chassis.

A number of Pak 36(r) guns were captured by the Red Army (e.g. in the Battle of Stalingrad) and were adopted by anti-tank battalions.

Summary

When the FK36(r) and Pak 36(r) reached the battlefield, they were able to destroy any contemporary tank at normal combat ranges. Although the guns were heavier and had somewhat smaller penetration figures than the purpose-built Pak 40, there is no doubt that the modernization of the F-22 provided the Wehrmacht with a very effective anti-tank gun at only a fraction of the cost of producing one from scratch.

Ammunition

Available ammunition
Type	Model	Weight (kg)	HE weight (g)	Muzzle velocity (m/s)	Range (m)
Armor-piercing shells
APCBC/HE	7.62 cm Pzgr.39	7.6	24, phlegmatized RDX	740	4,000
APCR	7.62 cm Pzgr.40	4.065	-	990	700
HEAT shells
HEAT	7.62 cm Gr.38 Hl/B	4.62	510	450	1,000
HEAT	7.62 cm Gr.38 Hl/С	5.05	510	450	1,000
High explosive and fragmentation shells
HE-Frag	7.62 cm Gr.34	6.25	550, amatol 40/60	550	10,000

 

Armor penetration table
7.62 cm Pzgr.39
Range (m)	Contact angle 60°, mm	Contact angle 90°, mm
0	108	133
457	98	120
915	88	108
1,372	79	97
1,829	71	87
7.62 cm Pzgr.40
Range (m)	Contact angle 60°, mm	Contact angle 90°, mm
0	152	190
457	118	158
915	92	130
1,372	71	106
1,829	55	84
These data were obtained using German methodics of armor penetration measurement. Exact figures depend on the production batch of the projectiles and the technology used in the manufacture of the armour.

The HEAT projectiles penetrated about 100–115 mm at a contact angle of 90°.

Photo Gallery

• 
  FK 36(r), CFB Borden.
• 
  FK 36(r), CFB Borden.
• 
  Brass-washed steel case and HE-shell for the German 7,62 cm Pak. 36 anti-tank gun.
• 
  Brochure with description of ammunition to the 7,62 cm Panzerjägerkanone 36 anti-tank gun

References

• D 183 - 7,62cm Panzerjägerkonone 36, 7,62cm Panzerjägerkanone 36 (Pz. Sfl 1) 7,62cm Panzerjägerkanone 36 (Pz Sfl 2).- Beschreibung, Bedienung und Behandlung. OKH/Heereswaffenamt, Berlin 1942 (Gun manual).
• H.Dv. 481.85 – Merkblatt für die Munition der 7,62 cm Panzerjägerkanone 36 (7,62 cm Pak.36), Berlin 11.6.1942 (Ammo description).
• Karl R. Pawlas - Die 7,62 cm Pak 36, “Waffen Revue” No. 84/1992, Journal-Verlag, Nürnberg.
• Gander, Terry and Chamberlain, Peter. Weapons of the Third Reich: An Encyclopedic Survey of All Small Arms, Artillery and Special Weapons of the German Land Forces 1939-1945. New York: Doubleday, 1979 ISBN 0-385-15090-3
• Hogg, Ian V. German Artillery of World War Two. 2nd corrected edition. Mechanicsville, PA: Stackpole Books, 1997 ISBN 1-85367-480-X
• Hogg, Ian V. The Guns 1939-451st UK edition, Macdonald & Co. 1970.
• Shirokorad A. B. - The God of War of the Third Reich - M. AST, 2002 (Широкорад А. Б. - Бог войны Третьего рейха. — М.,ООО Издательство АСТ, 2002., ISBN 5-17-015302-3)
• Ivanov A. - Artillery of Germany in Second World War - SPb Neva, 2003 (Иванов А. - Артиллерия Германии во Второй Мировой войне. — СПб., Издательский дом «Нева», 2003., ISBN 5-7654-2634-4)
• Klyuev A. etc. - German Artillery Ammunition Reference Book - M., 1943 (А.Клюев и др - Справочник по комплектации боеприпасов германской артиллерии. — М., 1943)