Made In Space
![]() | |
Company type | Private |
---|---|
Industry | Aerospace |
Founded | August 2010[1] |
Headquarters | , United States[1] |
Key people | Aaron Kemmer, Jason Dunn, Michael Snyder, Andrew Rush[1] |
Products | On-Orbit construction, Archinaut |
Number of employees | ~100 (2019)[2] |
Website | madeinspace |
Made In Space, Inc. (MIS) is a US-based company specializing in the engineering and manufacturing of three-dimensional printers for use in microgravity. Headquartered in Jacksonville, Florida, Made In Space's 3D printer (Zero-G printer) was the first manufacturing device used in space.
History
Made In Space was founded in August 2010 by Aaron Kemmer, Jason Dunn, Mike Chen, and Michael Snyder, during that year's Singularity University Graduate Studies Program. Their primary mission is to enable humanity to become a multi-planetary species. In the spring of 2011, Made In Space created their 3D Printing Lab at the NASA Ames Research Center on Moffett Field in Mountain View, California. That summer, they were awarded a sub-orbital flight for the printer through NASA's Flight Opportunities Program. From July through September 2011, the Made In Space team performed over 400 microgravity test parabolas on NASA's reduced gravity aircraft (the "Vomit Comet"), proving their 3D printing in microgravity. With this proven concept, Made In Space was award a Phase 1 Small Business Innovation Research (SBIR) grant for the design of a 3D printer to be tested on the International Space Station (ISS).[3]
In January 2013, Made In Space was awarded Phase 2 of the SBIR to build and flight-qualify an additive manufacturing facility with their 3D printer for the International Space Station (ISS).[4] Phase 3 was awarded in February 2013 to fly their 3D printer to the ISS.
In May 2014, NASA awarded Made In Space a Phase 1 SBIR contract for the development of a recycler unit to use with the 3D printer the ISS and for their microwell project. Shortly after, Made In Space was awarded an ISS Space Flight Awareness Award. This award honors "teams that have significantly improved the efficiency, cost or capabilities of space flight".[5]
In June 2014, Made In Space showcased their in-space manufacturing capabilities at the White House Maker Faire.[6]
On September 21, 2014 at 1:52 a.m. EDT (0552 GMT), Made In Space's Zero-G printer was launched from Cape Canaveral, Florida to the ISS on board SpaceX CRS-4. On November 17, astronaut Barry "Butch" Wilmore unpacked the 3D printer from its launch packaging. On November 24 at approximately 1:28 p.m. PST, Made In Space successfully printed the first part ever manufactured in space. On December 11, 2014, Made In Space's the printer's first functional application was announced: a buckle developed by NASA astronaut Yvonne Cagle. This buckle is part of exercise equipment to assist with the reduction of muscle loss in zero gravity environments.
On December 12, 2014, the Cooper Hewitt, Smithsonian Design Museum re-opened after three years of renovation. Made In Space's 3D printer was one of their re-opening exhibits at the "Tools: Extending Our Reach" exhibit area.[7] The Zero-G printer was featured along with replicas of 13 of the first 21 objects printed in space and a replica of the plate affixed to the printer, which was created by Jon Lomberg, the artist who designed Voyager's Golden Record.
On December 17, 2014, the first uplinked tool, a ratchet, was manufactured on the ISS. All of the other items previously manufactured were printed before launch, and the files were available via an SD card launched along with the printer. The ratchet files were uplinked from the Made In Space office to the ISS space station. The ratchet took four hours to print.[8]
On September 27, 2018, the company announced an agreement with local government to open its European subsidiary in Luxembourg. Made In Space Europe will work on the development of a low-cost modular robotic arm for in-space applications.[9]
On January 17, 2020, Florida governor Ron DeSantis announced the company's corporate headquarters would be relocating from Mountain View, CA to Jacksonville, FL. The headquarters relocation and expansion effort will involve more than $3 million in new capital investment for Jacksonville.[10]
Made in Space was acquired in June 2020, by Redwire[11] (a newly formed company of the merger between Deep Space Systems and Adcole Space).[12]
3D Printing in Zero-G Technology Demonstration
Announced in May 2013, NASA and Made In Space sent the first 3D printer to space, known as the 3D Printing in Zero-G Technology Demonstration (also known as 3D Printing in Zero-G Experiment or 3D Printing in Zero-G). The scientific objective of this experiment was to prove a 3D printer could be developed for use in zero gravity. This experiment "is the first step towards establishing an on-demand machine shop in space, a critical enabling component for deep space crewed missions and in-space manufacturing".[13]
Integrated into a Microgravity Science Glovebox (MSG), 3D Printing in Zero-G is a proof of concept experiment. It includes printing multiple copies of planned items to test for several variables, including dimensions, layer adhesion, tensile strength, flexibility, and compressional strength. Known as "coupons", these items will be tested by the American Society for Testing and Materials (ASTM) and compared to duplicate items printed on Earth. The comparisons of these space and terrestrial manufactured coupons will be used to further refine 3D printing in space.[13]
The Jon Lomberg Golden Plate
Inspired by Jon Lomberg's work on the Voyager Golden Record, Lomberg worked with Made In Space to create the Golden Plate to help commemorate the first manufacturing of something in space. It is attached internally, so it is visible through the front viewing window.[citation needed]
The Golden Plate features imagery that symbolizes both the 3D Printing in Zero-G project and the individuals who have been instrumental in bringing the project to fruition. These features include 27 stars, which represents 16 key contributors from the Marshall Space Flight Center; 10 key Made In Space, Inc. employees, and Jon Lomberg; a comet to symbolize all of the other people who supported Made In Space; and Star Trek character Jean Luc Picard's catchphrase, "Make it so", in binary, symbolizing the functionality the 3D printer brings to the ISS.[citation needed]
Additive Manufacturing Facility
In April 2016, the Additive Manufacturing Facility was installed aboard the ISS. It is designed to be accessible for use by NASA as well as other government agencies, academic institutions and businesses.[14] It is currently capable of printing objects as large as 10 cm x 10 cm x 14 cm from three different polymers including acrylonitrile butadiene styrene (ABS), high-density polyethylene (HDPE), and a polyetherimide/polycarbonate composite (PEI-PC).[15]
Recycling of 3D printer plastic
In 2014, NASA selected Made In Space as one of several companies to develop a recycler for 3D printed material on the ISS.[16] In the follow-up solicitation, Made In Space failed to be selected for the Phase II SBIR.[17][18]
Large structure in-space manufacturing
Made In Space is working with Northrop Grumman and Oceaneering to build and demonstrate Archinaut, a versatile in-space robotic precision manufacturing and assembly system.[19] Archinaut would enable in-space production and assembly of the backbone structures for large telescopes, repair, augmentation, or repurposing of existing spacecraft, and robotic assembly of new space stations. MIS is currently in ground testing of a central spar onto which rolled up solar arrays can be extended and locked into place. The flight demonstration is expected in 2022, launched on an Electron rocket.[19]
The company has released video demonstrations of Archinaut's robotic assembly and Robotics Development Lab, as well as animations showing Archinaut's in-space assembly and manufacture capabilities.[20][21][22]
Fiber optics
The multi-flight experimental payloads are producing test quantities of ZBLAN optical fiber. Based on the results from initial experiments and market demand, Made In Space plans to develop and operate larger-scale microgravity production facilities for ZBLAN and other microgravity-enabled materials. For its fiber optics development, MIS has teamed with ThorLabs. The advantage of fiber optics produced in microgravity are much lower signal loss capabilities, which benefit long-haul communications, medical research, super-computing, and many other industries and applications.[23]
Other activities
In 2018, MIS was awarded Small Business Innovation Research award extensions of 24 months for its Vulcan and Industrial Crystallization Facility (ICF). The Vulcan Advanced Hybrid Manufacturing System is an additive and subtractive manufacturing technology being developed for in-space applications.[24] Vulcan enables fabrication of precisely-machined metal parts at the point-of-use, such as on the International Space Station or future crewed space platforms. The ICF on the International Space Station would also manufacture space-enabled, multi-use optical crystals in microgravity. Optical crystals are used by such industries as computers and data-processing systems.[25] An MIS commercial recycling facility is scheduled to be sent to the International Space Station in late 2019. The facility will take in plastic waste and unneeded plastic parts and physically convert them into spools of feedstock for the space station additive manufacturing facility used for manufactured-in-space parts.[26]
See also
References
- ^ a b c https://madeinspace.us/media-kit
- ^ https://arstechnica.com/science/2019/07/nasas-technology-program-funds-ambitious-in-space-manufacturing-mission/
- ^ "ISS Additive Manufacturing Facility for On-Demand Fabrication in Space". sbir.gov. Small Business Innovation Research. Retrieved 27 December 2014.
- ^ "ISS Additive Manufacturing Facility for On-Demand Fabrication in Space". sbir.gov. Small Business Innovation Research. Retrieved 27 December 2014.
- ^ Lowery, Grant. "Made in Space Receives AMES ISS Space Flight Awareness Award". MadeInSpace.us. Made In Space, Inc. Archived from the original on 2014-11-28. Retrieved 27 December 2014.
- ^ Pegoraro, Rob. "White House Hosts Its First Maker Faire, with Robotic Giraffe in Attendance". Yahoo.com. Yahoo. Retrieved 27 December 2014.
- ^ "About Tools: Extending Our Reach". cooperhewitt.org. Cooper Hewitt. Retrieved 27 December 2014.
- ^ Afsarifard, Hasti. "THE FIRST UPLINK TOOL MADE IN SPACE IS…". madeinspace.us. Made In Space, Inc. Retrieved 27 December 2014.
- ^ Clinton, Trey. "Made In Space Expands Via Luxembourg Into Europe". madeinspace.us. Made In Space, Inc. Retrieved 27 September 2018.
- ^ "Governor Ron DeSantis Announces Made In Space Corporate Headquarters Relocation from California to Florida". flgov.com. Retrieved 17 January 2020.
- ^ https://www.aeroequity.com/redwire/ Redwire
- ^ "Made in Space acquired by private equity firm". 2020-06-23. Retrieved 2020-06-30.
- ^ a b "3D Printing In Zero-G Technology Demonstration (3D Printing In Zero-G)". Nasa.gov. NASA. Retrieved 25 August 2019.
- ^ "Additive Manufacturing Facility (AMF)" (PDF). NASA. Retrieved 31 July 2020.
- ^ Wainscott-Sargent, Anne. "The New Gold Rush: Printing in Micro-G". UPWARD Magazine of the ISS National Lab. The Center for the Advancement of Science in Space, Inc. Retrieved 31 July 2020.
- ^ "NASA Selects 'Made In Space' to Produce In-orbit Plastic Recycling System for 3D Printer Filament - 3DPrint.com - The Voice of 3D Printing / Additive Manufacturing". 3dprint.com. Retrieved 25 August 2019.
- ^ "SBIR-14-2-H10.01-9479 - Abstract - Positrusion Filament Recycling System for ISS". sbir.nasa.gov. Retrieved 25 August 2019.
- ^ "NASA 2014 SBIR Program Phase II Selections - NASA SBIR & STTR Program Homepage". sbir.nasa.gov. Retrieved 25 August 2019.
- ^ a b NASA seeks to break the "tyranny of launch" with in-space manufacturing. Eric Berger, Ars Technica. 29 July 2019.
- ^ ULISSES
- ^ DILO
- ^ Thompson, Avery. "Humanity's Biggest Machines Will Be Built in Space". Popular Mechanics. Retrieved 15 March 2018.
- ^ Wall, Mike. "In-Space Manufacturing Is About to Get a Big Test". Space.com. Retrieved 19 March 2018.
- ^ NASA. "SBIR Solicitation".
- ^ NASA. "SBIR Solicitation".
- ^ Werner, Debra (21 October 2019). "Made In Space to launch commercial recycler to space station". SpaceNews. Retrieved 22 October 2019.
- Manufacturing companies of the United States
- Space technology
- 3D printer companies
- Companies based in Mountain View, California
- Technology companies based in the San Francisco Bay Area
- Space industry companies
- 2010 establishments in California
- Manufacturing companies established in 2010
- Space organizations
- Space manufacturing
- American companies established in 2010