Gibbons–Hawking–York boundary term
In general relativity, the Gibbons–Hawking–York boundary term is a term that needs to be added to the Einstein–Hilbert action when the underlying spacetime manifold has a boundary.
The Einstein–Hilbert action is the basis for the most elementary variational principle from which the field equations of general relativity can be defined. However, the use of the Einstein–Hilbert action is appropriate only when the underlying spacetime manifold is closed, i.e., a manifold which is both compact and without boundary. In the event that the manifold has a boundary , the action should be supplemented by a boundary term so that the variational principle is well-defined.
The necessity of such a boundary term was first realised by York and later refined in a minor way by Gibbons and Hawking.
For a manifold that is not closed, the appropriate action is
where is the Einstein–Hilbert action, is the Gibbons–Hawking–York boundary term, is the induced metric (see section below on definitions) on the boundary, its determinant, is the trace of the second fundamental form, is equal to where the normal to is spacelike and where the normal to is timelike, and are the coordinates on the boundary. Varying the action with respect to the metric , subject to the condition
gives the Einstein equations; the addition of the boundary term means that in performing the variation, the geometry of the boundary encoded in the transverse metric is fixed (see section below). There remains ambiguity in the action up to an arbitrary functional of the induced metric .
That a boundary term is needed in the gravitational case is because , the gravitational Lagrangian density, contains second derivatives of the metric tensor. This is a non-typical feature of field theories, which are usually formulated in terms of Lagrangians that involve first derivatives of fields to be varied over only.
The GHY term is desirable, as it possesses a number of other key features. When passing to the Hamiltonian formalism, it is necessary to include the GHY term in order to reproduce the correct Arnowitt–Deser–Misner energy (ADM energy). The term is required to ensure the path integral (a la Hawking) for quantum gravity has the correct composition properties. When calculating black hole entropy using the Euclidean semiclassical approach, the entire contribution comes from the GHY term. This term has had more recent applications in loop quantum gravity in calculating transition amplitudes and background-independent scattering amplitudes.
In order to determine a finite value for the action, one may have to subtract off a surface term for flat spacetime:
where is the extrinsic curvature of the boundary imbedded flat spacetime. As is invariant under variations of , this addition term does not affect the field equations; as such, this is referred to as the non-dynamical term.
Introduction to hyper-surfaces
Defining hyper-surfaces
In a four-dimensional spacetime manifold, a hypersurface is a three-dimensional submanifold that can be either timelike, spacelike, or null.
A particular hyper-surface can be selected either by imposing a constraint on the coordinates
or by giving parametric equations,
where are coordinates intrinsic to the hyper-surface.
For example, a two-sphere in three-dimensional Euclidean space can be described either by
where is the radius of the sphere, or by
where and are intrinsic coordinates.
Hyper-surface orthogonal vector fields
We take the metric convention (-,+,...,+). We start with the family of hyper-surfaces given by
where different members of the family correspond to different values of the constant . Consider two neighbouring points and with coordinates and , respectively, lying in the same hyper-surface. We then have to first order
Subtracting off from this equation gives
at . This implies that is normal to the hyper-surface. A unit normal can be introduced in the case where the hyper-surface is not null. This is defined by
and we require that point in the direction of increasing . It can then easily be checked that is given by
if the hyper-surface either spacelike or timelike.
Induced and transverse metric
The three vectors
are tangential to the hyper-surface.
The induced metric is the three-tensor defined by
This acts as a metric tensor on the hyper-surface in the coordinates. For displacements confined to the hyper-surface (so that )
Because the three vectors are tangential to the hyper-surface,
where is the unit vector () normal to the hyper-surface.
We introduce what is called the transverse metric
It isolates the part of the metric that is transverse to the normal .
It is easily seen that this four-tensor
projects out the part of a four-vector transverse to the normal as
We have
If we define to be the inverse of , it is easy to check
where
Note that variation subject to the condition
implies that , the induced metric on , is held fixed during the variation.
On proving the main result
In the following subsections we will first compute the variation of the Einstein–Hilbert term and then the variation of the boundary term, and show that their sum results in
where is the Einstein tensor, which produces the correct left-hand side to the Einstein field equations, without the cosmological term, which however is trivial to include by replacing with
where is the cosmological constant.
In the third subsection we elaborate on the meaning of the non-dynamical term.
Variation of the Einstein–Hilbert term
We will use the identity
and the Palatini identity:
which are both obtained in the article Einstein–Hilbert action.
We consider the variation of the Einstein–Hilbert term:
The first term gives us what we need for the left-hand side of the Einstein field equations. We must account for the second term.
By the Palatini identity
We will need Stokes theorem in the form:
where is the unit normal to and , and are coordinates on the boundary. And where where , is an invariant three-dimensional volume element on the hyper-surface. In our particular case we take .
We now evaluate on the boundary , keeping in mind that on . Taking this into account we have
It is useful to note that
where in the second line we have swapped around and and used that the metric is symmetric. It is then not difficult to work out .
So now
where in the second line we used the identity , and in the third line we have used the anti-symmetry in and . As vanishes everywhere on the boundary its tangential derivatives must also vanish: . It follows that . So finally we have
Gathering the results we obtain
We next show that the above boundary term will be cancelled by the variation of .
Variation of the boundary term
We now turn to the variation of the term. Because the induced metric is fixed on the only quantity to be varied is is the trace of the extrinsic curvature.
We have
where we have used that implies So the variation of is
where we have use the fact that the tangential derivatives of vanish on We have obtained
which cancels the second integral on the right-hand side of Eq. 1. The total variation of the gravitational action is:
This produces the correct left-hand side of the Einstein equations. This proves the main result.
This result was generalised to fourth-order theories of gravity on manifolds with boundaries in 1983[1] and published in 1985.[2]
The non-dynamical term
We elaborate on the role of
in the gravitational action. As already mentioned above, because this term only depends on , its variation with respect to gives zero and so does not effect the field equations, its purpose is to change the numerical value of the action. As such we will refer to it as the non-dynamical term.
Let us assume that is a solution of the vacuum field equations, in which case the Ricci scalar vanishes. The numerical value of the gravitational action is then
where we are ignoring the non-dynamical term for the moment. Let us evaluate this for flat spacetime. Choose the boundary to consist of two hyper-surfaces of constant time value and a large three-cylinder at (that is, the product of a finite interval and a three-sphere of radius ). We have on the hyper-surfaces of constant time. On the three cylinder, in coordinates intrinsic to the hyper-surface, the line element is
meaning the induced metric is
so that . The unit normal is , so . Then
and diverges as , that is, when the spatial boundary is pushed to infinity, even when the is bounded by two hyper-surfaces of constant time. One would expect the same problem for curved spacetimes that are asymptotically flat (there is no problem if the spacetime is compact). This problem is remedied by the non-dynamical term. The difference will be well defined in the limit .
Variation of modified gravity terms
There are many theories which attempt to modify General Relativity in different ways, for example f(R) gravity replaces R, the Ricci scalar in the Einstein–Hilbert action with a function f(R). Guarnizo et al. found the boundary term for a general f(R) theory.[3] They found that the "modified action in the metric formalism of f(R) gravity plus a Gibbons–York–Hawking like boundary term must be written as:"
where .
By using the ADM decomposition and introducing extra auxiliary fields, in 2009 Deruelle et al. found a method to find the boundary term for "gravity theories whose Lagrangian is an arbitrary function of the Riemann tensor."[4] This method can be used to find the GHY boundary terms for Infinite derivative gravity.[5]
A path-integral approach to quantum gravity
As mentioned at the beginning, the GHY term is required to ensure the path integral (a la Hawking et al.) for quantum gravity has the correct composition properties.
This older approach to path-integral quantum gravity had a number of difficulties and unsolved problems. The starting point in this approach is Feynman's idea that one can represent the amplitude
to go from the state with metric and matter fields on a surface to a state with metric and matter fields on a surface , as a sum over all field configurations and which take the boundary values of the fields on the surfaces and . We write
where is a measure on the space of all field configurations and , is the action of the fields, and the integral is taken over all fields which have the given values on and .
It is argued that one need only specify the three-dimensional induced metric on the boundary.
Now consider the situation where one makes the transition from metric , on a surface , to a metric , on a surface and then on to a metric on a later surface
One would like to have the usual composition rule
expressing that the amplitude to go from the initial to final state to be obtained by summing over all states on the intermediate surface .
Let be the metric between and and be the metric between and . Although the induced metric of and will agree on , the normal derivative of at will not in general be equal to that of at . Taking the implications of this into account, it can then be shown that the composition rule will hold if and only if we include the GHY boundary term.[6]
In the next section it is demonstrated how this path integral approach to quantum gravity leads to the concept of black hole temperature and intrinsic quantum mechanical entropy.
Calculating black-hole entropy using the Euclidean semi-classical approach
![]() | This section is empty. You can help by adding to it. (November 2015) |
Application in loop quantum gravity
Transition amplitudes and the Hamilton's principal function
In the quantum theory, the object that corresponds to the Hamilton's principal function is the transition amplitude. Consider gravity defined on a compact region of spacetime, with the topology of a four dimensional ball. The boundary of this region is a three-dimensional space with the topology of a three-sphere, which we call . In pure gravity without cosmological constant, since the Ricci scalar vanishes on solutions of Einstein's equations, the bulk action vanishes and the Hamilton's principal function is given entirely in terms of the boundary term,
where is the extrinsic curvature of the boundary, is the three-metric induced on the boundary, and are coordinates on the boundary.
The functional is a highly non-trivial functional to compute; this is because the extrinsic curvature is determined by the bulk solution singled out by the boundary intrinsic geometry. As such is non-local. Knowing the general dependence of from is equivalent to knowing the general solution of the Einstein equations.
Background-independent scattering amplitudes
Loop quantum gravity is formulated in a background-independent language. No spacetime is assumed a priori, but rather it is built up by the states of theory themselves – however scattering amplitudes are derived from -point functions (Correlation function (quantum field theory)) and these, formulated in conventional quantum field theory, are functions of points of a background space-time. The relation between the background-independent formalism and the conventional formalism of quantum field theory on a given spacetime is far from obvious, and it is far from obvious how to recover low-energy quantities from the full background-independent theory. One would like to derive the -point functions of the theory from the background-independent formalism, in order to compare them with the standard perturbative expansion of quantum general relativity and therefore check that loop quantum gravity yields the correct low-energy limit.
A strategy for addressing this problem has been suggested;[7] the idea is to study the boundary amplitude, or transition amplitude of a compact region of spacetime, namely a path integral over a finite space-time region, seen as a function of the boundary value of the field.[8][9] In conventional quantum field theory, this boundary amplitude is well-defined[10][11] and codes the physical information of the theory; it does so in quantum gravity as well, but in a fully background-independent manner.[12] A generally covariant definition of -point functions can then be based on the idea that the distance between physical points – arguments of the -point function is determined by the state of the gravitational field on the boundary of the spacetime region considered.
The key observation is that in gravity the boundary data include the gravitational field, hence the geometry of the boundary, hence all relevant relative distances and time separations. In other words, the boundary formulation realizes very elegantly in the quantum context the complete identification between spacetime geometry and dynamical fields.
Notes
- ^ "Second and fourth order gravitational actions on manifolds with boundaries". ResearchGate. Retrieved 2017-05-08.
- ^ Barth, N H (1985-07-01). "The fourth-order gravitational action for manifolds with boundaries". Classical and Quantum Gravity. 2 (4). IOP Publishing: 497–513. doi:10.1088/0264-9381/2/4/015. ISSN 0264-9381.
- ^ Guarnizo, Alejandro; Castaneda, Leonardo; Tejeiro, Juan M. (2010). "Boundary Term in Metric f(R) Gravity: Field Equations in the Metric Formalism". General Relativity and Gravitation. 42 (11): 2713–2728. arXiv:1002.0617. Bibcode:2010GReGr..42.2713G. doi:10.1007/s10714-010-1012-6.
- ^ Deruelle, Nathalie; Sasaki, Misao; Sendouda, Yuuiti; Yamauchi, Daisuke (2009). "Hamiltonian formulation of f(Riemann) theories of gravity". Progress of Theoretical Physics. 123: 169–185. arXiv:0908.0679. Bibcode:2010PThPh.123..169D. doi:10.1143/PTP.123.169.
- ^ Teimouri, Ali; Talaganis, Spyridon; Edholm, James; Mazumdar, Anupam (2016). "Generalised Boundary Terms for Higher Derivative Theories of Gravity". Journal of High Energy Physics. 2016 (8). arXiv:1606.01911. Bibcode:2016JHEP...08..144T. doi:10.1007/JHEP08(2016)144.
- ^ For example see the book "Hawking on the big bang and black holes" by Stephen Hawking, chapter 15.
- ^ Modesto, Leonardo; Rovelli, Carlo (2005-11-01). "Particle Scattering in Loop Quantum Gravity". Physical Review Letters. 95 (19). American Physical Society (APS): 191301. arXiv:gr-qc/0502036. doi:10.1103/physrevlett.95.191301. ISSN 0031-9007.
- ^ Oeckl, Robert (2003). "A "general boundary" formulation for quantum mechanics and quantum gravity". Physics Letters B. 575 (3–4). Elsevier BV: 318–324. doi:10.1016/j.physletb.2003.08.043. ISSN 0370-2693.
- ^ Oeckl, Robert (2003-11-03). "Schrödinger's cat and the clock: lessons for quantum gravity". Classical and Quantum Gravity. 20 (24). IOP Publishing: 5371–5380. arXiv:gr-qc/0306007. doi:10.1088/0264-9381/20/24/009. ISSN 0264-9381.
- ^ Conrady, Florian; Rovelli, Carlo (2004-09-30). "Generalized Schrödinger equation in Euclidean field theory". International Journal of Modern Physics A. 19 (24). World Scientific Pub Co Pte Lt: 4037–4068. arXiv:hep-th/0310246. doi:10.1142/s0217751x04019445. ISSN 0217-751X.
- ^ Doplicher, Luisa (2004-09-24). "Generalized Tomonaga-Schwinger equation from the Hadamard formula". Physical Review D. 70 (6). American Physical Society (APS): 064037. arXiv:gr-qc/0405006. doi:10.1103/physrevd.70.064037. ISSN 1550-7998.
- ^ Conrady, Florian; Doplicher, Luisa; Oeckl, Robert; Rovelli, Carlo; Testa, Massimo (2004-03-18). "Minkowski vacuum in background independent quantum gravity". Physical Review D. 69 (6). American Physical Society (APS): 064019. arXiv:gr-qc/0307118. doi:10.1103/physrevd.69.064019. ISSN 1550-7998.
References
- York, J. W. (1972). "Role of conformal three-geometry in the dynamics of gravitation". Physical Review Letters. 28 (16): 1082. Bibcode:1972PhRvL..28.1082Y. doi:10.1103/PhysRevLett.28.1082.
- Gibbons, G. W.; Hawking, S. W. (1977). "Action integrals and partition functions in quantum gravity". Physical Review D. 15 (10): 2752. Bibcode:1977PhRvD..15.2752G. doi:10.1103/PhysRevD.15.2752.
- Hawking, S W; Horowitz, Gary T (1996-06-01). "The gravitational Hamiltonian, action, entropy and surface terms". Classical and Quantum Gravity. 13 (6). IOP Publishing: 1487–1498. arXiv:gr-qc/9501014. doi:10.1088/0264-9381/13/6/017. ISSN 0264-9381.
- Brown, J. David; York, James W. (1993-02-15). "Microcanonical functional integral for the gravitational field". Physical Review D. 47 (4). American Physical Society (APS): 1420–1431. arXiv:gr-qc/9209014. doi:10.1103/physrevd.47.1420. ISSN 0556-2821.