Australian National AL class

Australian National AL class
Type and origin Power type Diesel-electric Builder Clyde Engineering, Rosewater Serial number 76-834 to 76-841 Model JT26C (AL) JT26C-2M (ALF) Build date 1976/77 Total produced 8 Rebuilder Morrison Knudsen Australia Rebuild date 1994 Number rebuilt 8
Specifications Configuration: ​  • UIC Co-Co Gauge 1,435 mm (4 ft 8+1⁄2 in) standard gauge Length 20.6 m (67 ft 7 in) Fuel type Diesel Prime mover Electro-Motive Diesel 16-645E3 (AL) Electro-Motive Diesel 16-645E3C (ALF) Engine type V16 Two-stroke diesel Aspiration Turbocharged Cylinders 16
Performance figures Power output 2,237 kW (3,000 hp) (AL) 2,460 kW (3,300 hp) (ALF)
Career Operators Australian National Number in class 8 Numbers AL18-AL25 Delivered October 1976 Current owner Genesee & Wyoming Australia Disposition 5 in service, 3 stored

The AL class are a class of diesel locomotives built by Clyde Engineering, Rosewater for Australian National in 1976/77. They were mechanically similar to the CL class but instead of a bulldog nose had two flat ended cabs, similar to the 422 class built for the New South Wales Government Railways in 1969.

History

The AL class initially operated services on the Trans-Australian Railway from Broken Hill to Kalgoorlie, their sphere of operation being extended to Alice Springs and Adelaide when these lines were converted to standard gauge in 1980 and 1983. Although capable of hauling passenger services they tended to be restricted to slower freight trains to minimise track pounding due to their weight.

Three were loaned to the Public Transport Commission in 1979 resulting in 80 mechanically similar class 81s being ordered in 1980. From July 1990 through working into New South Wales was introduced resulting in ALs operating services beyond Broken Hill to Lithgow.

In 2004 they began to operate to Darwin following this line opening.

Remanufacturing

In August 1992, Australian National awarded Morrison Knudsen Australia a contract to remanufacture the ALs at its Whyalla factory. As part of the deal Morrison Knudsen purchased the locomotives and leased them back to Australian National for 12 years.

The rebuilding in the first half of 1994 involved stripping back to the frame. Changes included the EMD 645E3 engines being replaced with overhauled EMD 645E3C engines imported from Morrison Knudsen in the USA, removing the No 2 end cab and being reclassified as the ALF class. After rebuilding the locomotives did not retain their numbers, for example the first locomotive converted was AL21 which emerged as ALF18.

In 1994, Australian National's interstate services were transferred to National Rail. The lease with Morrison Knudsen meant the locomotives could only be used on Australian National trains, or a higher lease fee would apply. As a result, the class were not seen on National Rail operated trains, and did not venture onto the wider national standard gauge network until Australian National won hook and pull contracts for private operator SCT Logistics in July 1995.

Private ownership

In November 1997, the AL class were sold to Australian Southern Railroad with Australian National's remaining freight operations. With the splitting up of the Australian Railroad Group in June 2006, one went to QR National and seven to Genesee & Wyoming Australia.

Status table

Original No	Name	Entered Service	Rebuilt No	Owner	Status
AL18	Malcolm Fraser	4 Oct 1976	ALF19	Genesee & Wyoming Australia	Operational
AL19		18 Oct 1976	ALF25	Aurizon	Stored, renumbered ALZ3208
AL20		10 Nov 1976	ALF21	Genesee & Wyoming Australia	Operational
AL21		6 Dec 1976	ALF18	Genesee & Wyoming Australia	Operational
AL22		20 Jun 1977	ALF24	Genesee & Wyoming Australia	Stored serviceable as of November 2015
AL23		6 Jul 1977	ALF22	Genesee & Wyoming Australia	Operational
AL24		22 Jul 1977	ALF20	Genesee & Wyoming Australia	Stored serviceable as of November 2015
AL25	Peter Nixon	24 Aug 1977	ALF23	Genesee & Wyoming Australia	Operational