Jump to content

Bavarian MCCi

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by DePiep (talk | contribs) at 01:03, 15 January 2017 (Tempate:Infobox Schienenfahrzeug - set parameter boxtype (via JWB)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Bavarian MCCi
Type and origin
BuilderMaffei, MAN
Build date1906–1908
Total produced7
Specifications
Configuration:
 • Whyte0-4-4
Gauge1,435 mm
Driver dia.990 mm
Carrying wheel diameter990 mm
Length:
 • Over buffers19,941 mm
Firebox:
 • Grate area0.83 m2
Boiler pressure12 bar
Heating surface35.50/42.00 m2
Cylinders2
Cylinder size265 mm
Piston stroke280 mm
Performance figures
Maximum speed50 km/h
Indicated power145 kW
Career
Numbers14501–14507
Retired1920s (rebuilt)

The steam railbuses of Bavarian Class MCCi were built between 1906 - 1908 for the Royal Bavarian State Railways (Königlich Bayerische Staatsbahn) for suburban services in the Munich area. Seven units were produced, the coach bodies being manufactured by MAN and the engines by Maffei.

The railbuses had a B'2' axle arrangement, thus two of the four axles were driven. The engine was technically very similar to that of the four-wheeled Lokalbahn (branch line) locomotives of Bavarian Class ML 2/2.

In the mid-1920s as the vehicles were taken over by the Deutsche Reichsbahn, four of the railbuses were converted to electric propulsion and initially classified as the D4i elT and later as ET 85. They were therefore prototypes for the DRG's Class ET 85s.

Another MCCi was converted to a diesel railbus in 1928 by MAN (VT 865); this did not prove effective however and was retired by the end of the 1920s.

See also