Jump to content

Block post

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by AnomieBOT (talk | contribs) at 17:18, 12 October 2016 (Dating maintenance tags: {{Self published inline}}). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Block post, HDM, in the centre of the Hindenburgdamm (1978)

A block post in railway signalling is the signal box at one end of a block section.[1][self-published source?]

German practice

In Germany block posts are known as Blockstellen (abbreviation: Bk) and are defined as railway facilities on the open line that, as part of a block system, mark the end of a block section. They usually have a home signal in each direction and on each running line. They are mainly found where the distance between two railway stations is greater than average.

In the early years of the railway, block posts were local signal boxes manned with block post keepers. Today there are only a few of these classic, railway staff-operated block posts. Their function has been largely superseded by equipment that forms part of an automatic block signalling (Selbsttätigen Streckenblocks or Sbk) system or by a central block post in a station signal box at one end of the section between two stations.

Block posts are described in the German railway regulations, the Eisenbahn-Bau- und Betriebsordnung or EBO, at § 4 sub-paragraph 4.[2]

See also

References

  1. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. ISBN 978-1-8472-8643-7., p. 39
  2. ^ de:Blockstelle at German Wikipedia.