Jump to content

Columbus II

From Wikipedia, the free encyclopedia
(Redirected from COLUMBUS II (cable system))

COLUMBUS II is an optical, repeatered, transatlantic telephone cable. It is approximately 12,102 km (7,520 mi; 6,535 nmi) in length. It entered into commercial service in 1994.[1] The system, along with the Americas cable, was the first to use the Erbium-doped fiber amplifier (EDFA) as its optical amplifier repeaters.[2] In 2009, the transatlantic section was retired, and as of 2023, only the Columbus-II-B section remains in use and has been upgraded. [3]

It is in 3 segments has landing points in:

  • Columbus II - A (1121 km) - 560 MB/s

1. Cancún, Mexico
2. West Palm Beach, Florida, United States

  • Columbus II - B (2068 km) - 2500 MB/s

2. West Palm Beach, Florida, United States
3. Magens Bay, St. Thomas, U.S. Virgin Islands

  • Columbus II - C (9116 km) - 560 MB/s

3. Magens Bay, St. Thomas, U.S. Virgin Islands
4. Funchal, Madeira, Portugal
5. Sardina, Gran Canaria, Spain
6. Palermo, Sicily, Italy

See also

[edit]

References

[edit]
  1. ^ Juggerst, Patrick (July 1995). "AT&T's Undersea Fiber-Optic Cable Systems". Sea Technology. 36 (7). Arlington, VA: Compass Publications, Inc.: 29–30, 32–34.
  2. ^ Repeatered Fiber Optic Submarine Systems. IGI Consulting (Report). Boston, MA: IGI Consulting, Inc. 1998. p. 27. Retrieved 14 June 2020.
  3. ^ FCC. "Report No. SCL-00272" (PDF).