Capillary number

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by I dream of horses (talk | contribs) at 01:04, 6 October 2016 (→‎top: clean up, typo(s) fixed: For example → For example, using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

In fluid dynamics, the capillary number (Ca) represents the relative effect of viscous forces versus surface tension acting across an interface between a liquid and a gas, or between two immiscible liquids. For example, an air bubble in a liquid flow tends to be deformed by the friction of the liquid flow due to viscosity effects, but the surface tension forces tend to minimize the surface. The capillary number is defined as:[1]

where µ is the dynamic viscosity of the liquid, V is a characteristic velocity and is the surface or interfacial tension between the two fluid phases.

The capillary number is a dimensionless quantity, hence its value does not depend on the system of units.

For low capillary numbers (a rule of thumb says less than 10−5), flow in porous media is dominated by capillary forces[2] whereas for high capillary number the capillary forces are negligible compared to the viscous forces.

See also

References

  1. ^ http://myweb.clemson.edu/~jsaylor/paperPdfs/aichej.2012.SaylorBounds.pdf
  2. ^ Ding, M., Kantzas, A.: Capillary number correlations for gas-liquid systems, SEP 2004-062 (2004)