CAMM (memory module)
Compression Attached Memory Module (CAMM) is a memory module developed at Dell by engineer Tom Schnell as a replacement for SO-DIMM which has been around for 25 years.
It was first used in the Dell Precision 7000-series laptops in 2022.[1]
JEDEC refers to the form factor as CAMM Common Spec, in which CAMM 1.0 specification set to be finalized in the second half of 2023[2] and could be featured on laptops by 2024.
According to Tom Schnell, SO-DIMM run into problems at 6400 MHz.[3]
Advantages are that it is thinner, allows for replaceable LPDDR modules, provide faster speeds above 6400 MHz, more capacities up to 128 GB per module and higher bandwidth. Disadvantages are that it cannot be mounted without tools and uses six screws.
History
In April 2022, Dell launched laptops in the Dell Precision 7000-series that used a custom form factor of CAMM for DDR5 SDRAM.
References
- ^ "Dell introduces CAMM DDR5 memory for its new Precision laptops, up to 128GB per module". VideoCardz.com. Retrieved 2023-01-19.
- ^ "CAMM standard set to replace SO-DIMM for laptop memory". TechSpot. Retrieved 2023-01-19.
- ^ Solca, Bogdan. "SO-DIMM laptop RAM form-factor to soon be replaced with Dell-developed CAMM standard". Notebookcheck. Retrieved 2023-01-19.
 | This computing article is a stub. You can help Wikipedia by expanding it. |