Jump to content

DR Class 119

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Rodw (talk | contribs) at 16:13, 25 February 2018 (Disambiguated: hydrodynamic transmissionFluid coupling). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

DR Class 119
Diesel loco 219 092
Type and origin
Builder"23 August" Bucharest Locomotive Works
Build date1976–85
Total produced200
Specifications
Configuration:
 • UICC’C’
Gauge1,435 mm (4 ft 8+12 in)
Driver dia.1,000 mm
Length:
 • Over buffers19,500 mm
Axle load16 t
Service weight99 t / 101 t
Fuel capacity4,000 l
Transmissionhydrodynamic
Train heatingelectric
Loco brakeCompressed air KNORR & DAKO driver's and auxiliary brake valves
Performance figures
Maximum speed120 km/h / 140 km/h
Power output2 × 990 kW / 1,100 kW / 1,380 kW /1,500 kW
Tractive effort:
 • Starting220 kN / 270 kN
Career
NumbersDR 119 001–200
DR/DB 219 003–200
DB 229 ...
Retiredby 2006
A "U-boat parade" in Gera (2002)

The DR Class 119 was an East German Deutsche Reichsbahn diesel locomotive that was built in Romania. When the Deutsche Bahn AG formed up in 1993 it was redesignated as DBAG Class 219.

They were nicknamed "U-boats" or "Ceaușescu's revenge" (Ceaușescus Rache) - the latter referring to the numerous technical problems the engines suffered before redesign.

History

The Class 119 was basically a development of the successful Class 118. In the late 1970s the DR needed locomotives with electric train heating, an axle load (Achsfahrmasse) of under 16 t and a power output of over 2,000 horsepower. As a result of the Comecon agreements, the East German economy was not allowed to build diesel locomotives with more than 1,500 horsepower. The locomotive builders of the Soviet Union could only supply heavy engines - the Classes 130-132 and 142. The only engine builder, who also wanted to use the "construction kit" (Baukasten) principle was the "23rd August" Locomotive Works, Bucharest, in Romania. The Romanian manufacturer declared itself also ready to install diesel engines produced in East Germany. The installation of such engines did not happen, however, because there were coordination problems in East Germany's national planning commission. In order the fulfil the order, the Bucharest factory installed engines under licence from the West German manufacturer, MTU.

Other countries in Comecon also received subcontractor orders. East Germany itself supplied inter alia hydrodynamic transmissions and axle motors.

The DR procured 200 locomotives from 1976 to 1985. The locomotive drive was, however, plagued by shortcomings and problems from the start. In its early days, 50% of the locomotives were in the workshops at any one time.

Literature

  • Köhler, Kurt; Stange, Andreas (2004). Die Baureihen 119, 219 und 229 Rumänische Dieselloks für die Deutsche Reichsbahn (in German). Freiburg: EK-Verlag. ISBN 3-88255-129-1.
  • Buchner, Mathias, ed. (2002). Die Baureihe 219 - Unterwegs mit den Reichsbahn-"U-Booten" (in German). Eisenbahn-Bildarchiv, EK-Verlag. ISBN 978-3-88255-340-6.
  • Schönheit, Walter (2002). "Baureihe 219. Im Führerstand". Lok Magazin (in German). 41 (255). München: GeraNova Zeitschriftenverlag GmbH: 52–55. ISSN 0458-1822.
  • Endisch, Dirk (2003). ""U-Boote" tauchen ab. Baureihe 219/229". Lok Magazin (in German). 42 (259). München: GeraNova Zeitschriftenverlag GmbH: 6–9. ISSN 0458-1822.
  • "Modernisierung einer Lokomotive der Baureihe 219". Eisenbahn-Revue International (in German). 6: 251-ff. 2001. ISSN 1421-2811.