Jump to content

Isopropyl acetate

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 182.191.182.140 (talk) at 13:56, 16 July 2016 (IUPAC Name Authenticity). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

https://pubchem.ncbi.nlm.nih.gov/compound/isopropyl_acetate#section=Names-and-Identifiers

Isopropyl acetate
Skeletal formula of isopropyl acetate
Ball-and-stick model of the isopropyl acetate molecule
Names
IUPAC name
1-Methylethyl acetate (verification needed)
Other names
Isopropyl acetate
1-methylethyl ester
2-acetoxypropane
2-propyl acetate
2-propyl ethanoate
methylethyl ethanoate
propan-2-yl ethanoate
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.003.238 Edit this at Wikidata
  • InChI=1S/C5H10O2/c1-4(2)7-5(3)6/h4H,1-3H3 ☒N
    Key: JMMWKPVZQRWMSS-UHFFFAOYSA-N ☒N
  • InChI=1/C5H10O2/c1-4(2)7-5(3)6/h4H,1-3H3
    Key: JMMWKPVZQRWMSS-UHFFFAOYAA
  • CC(OC(C)C)=O
Properties
C5H10O2
Molar mass 102.133 g·mol−1
Density 0.87 g/cm3
Melting point −73 °C (−99 °F; 200 K)
Boiling point 89 °C (192 °F; 362 K)
4.3 g/100 mL (27 °C)
Vapor pressure 42 mmHg (20°C)[1]
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineInstability (yellow): no hazard codeSpecial hazards (white): no code
1
3
Flash point 2 °C (36 °F; 275 K)
460 °C (860 °F; 733 K)
Explosive limits 1.8–7.8%
Lethal dose or concentration (LD, LC):
11,918 ppm (rat, 8 hr)[2]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 250 ppm (950 mg/m3)[1]
REL (Recommended)
None established[1]
IDLH (Immediate danger)
1800 ppm[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Isopropyl acetate is an ester, an organic compound which is the product of esterification of acetic acid and isopropanol. It is a clear, colorless liquid with a characteristic fruity odor.[3]

Isopropyl acetate is a solvent with a wide variety of manufacturing uses that is miscible with most other organic solvents, and moderately soluble in water. It is used as a solvent for cellulose, plastics, oil and fats. It is a component of some printing inks[4] and perfumes.

Isopropyl acetate decomposes slowly on contact with steel in the presence of air, producing acetic acid and isopropanol. It reacts violently with oxidizing materials and it attacks many plastics.[5]

Isopropyl acetate is quite flammable in both its liquid and vapor forms, and it may be harmful if swallowed or inhaled.[6]

The Occupational Safety and Health Administration has set a permissible exposure limit of 250 ppm (950 mg/m3) over an eight-hour time-weighted average for workers handling isopropyl acetate.[7]

References

  1. ^ a b c d NIOSH Pocket Guide to Chemical Hazards. "#0358". National Institute for Occupational Safety and Health (NIOSH).
  2. ^ "Isopropyl acetate". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  3. ^ "Isopropyl acetate". ChemViP.
  4. ^ "Celanese - The chemistry inside innovation™". chemvip.com. Retrieved 18 May 2015.
  5. ^ "ISOPROPYL ACETATE". International Chemical Safety Cards.
  6. ^ "Iso-propyl Acetate". Material Safety Data Sheets.
  7. ^ "NIOSH Pocket Guide to Chemical Hazards - Isopropyl acetate". Centers for Disease Control and Prevention.