Macchi L.2

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Cydebot (talk | contribs) at 05:24, 8 May 2019 (Robot - Moving category Italian military reconnaissance aircraft 1910–1919 to Category:1910s Italian military reconnaissance aircraft per CFD at Wikipedia:Categories for discussion/Log/2019 April 19.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Macchi L.2
Role Biplane flying boat
Manufacturer Macchi
First flight January 1916
Introduction October 1916
Status retired
Primary user Italian Navy
Number built 10
Developed from Macchi L.1

The Macchi L.2 was an Italian biplane flying boat developed from the earlier Macchi L.1, itself a copy of a captured Austrian Lohner flying boat.

Development

In an attempt to improve the performance of the L.1 flying-boat Macchi, the design was improved with a reduced span on the swept biplane wings and a more powerful 119 kW (160 hp) Isotta Fraschini V.4B engine. The L.2 was a three-bay unequal-span biplane flying boat with a two-man crew in side-by-side cockpits. It was powered by a single Isotta Fraschini engine, strut-mounted between the two wings and driving a pusher propeller. It was armed with a single machine gun on a trainable mounting and could also carry four light bombs. Ten L.2s were delivered to the Italian Navy, but they were soon replaced by the newer L.3.

Operators

 Kingdom of Italy

Specifications (L.2)

Data from The Illustrated Encyclopedia of Aircraft (Part Work 1982–1985). Orbis Publishing. p. 2392. {{cite book}}: Cite has empty unknown parameter: |coauthors= (help)

General characteristics

  • Crew: two

Performance

See also

Related development

Aircraft of comparable role, configuration, and era

Related lists

References

  • Taylor, Michael J. H. (1989). Jane's Encyclopedia of Aviation. London: Studio Editions.
  • The Illustrated Encyclopedia of Aircraft (Part Work 1982–1985). Orbis Publishing. p. 2392. {{cite book}}: Cite has empty unknown parameter: |coauthors= (help)