Jump to content

Pica (typography)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by RussBot (talk | contribs) at 23:54, 22 November 2016 (Robot: Editing intentional link to disambiguation page in hatnote per WP:INTDABLINK (explanation)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Not to be confused with small pica, the name for 11-point type.
For other uses, see Pica.
Pica
Unit systemtypographic unit
Unit oflength
Conversions
1 pica in ...... is equal to ...
   typographic units   12 points
   imperial/US units   ⁠1/6⁠ in
   metric (SI) units   4.2333 mm

The pica is a typographic unit of measure corresponding to approximately 1⁄6 of an inch, or 1⁄72 of a foot. One pica is further divided into 12 points.

To date, in printing three pica measures are used:

  • The French pica of 12 Didot points (also called cicéro) generally is: 12 × 0.376 = 4.512 mm (0.1776 in).
  • The American pica of 0.016044 inches (0.4075 mm). It was established by the United States Type Founders' Association in 1886.[1][2] In TeX one pica may be defined as 12⁄72.27 of an inch.
  • The contemporary computer pica is exactly 1⁄6 of a inch or 1⁄72 of a foot, i.e. 4.233 mm or 0.166 inches.

Publishing applications such as Adobe InDesign and QuarkXPress represent pica measurements with whole-number picas left of a lower-case p, followed by the points number, for example: 5p6 represents 5 picas and 6 points, or 51⁄2 picas.

Cascading Style Sheets defined by the World Wide Web Consortium use pc as the abbreviation for pica (1⁄6 of an inch), and pt for point (1⁄72 of an inch).[3]

The pica is also used in measuring the font capacity and is applied in the process of copyfitting.[4] The font length is measured there by the number of characters per pica (cpp). As books are most often printed with proportional fonts, cpp of a given font is usually a fractional number. For example, a 11-point font (like Helvetica) may have 2.4 cpp,[5] thus a 5-inch (30-pica) line of a usual octavo-sized (6×8 in) book page would contain around 72 characters (including spaces).[6][7]

The typographic pica must not be confused with the Pica font of the typewriters, which means a font where 10 typed characters make up a line one inch long.

See also

References

  1. ^ Legros, Lucien Alphonse; Grant, John Cameron (1916). Typographical Printing-Surfaces. London and New York: Longmann, Green, and Co. pp. 57–60.
  2. ^ Hyde, Grant Milnor (1920). Newspaper Editing: A Manual for Editors, Copyreaders, and Students of Newspaper Desk Work. New York and London: D. Appleton and Company. pp. 226–227.
  3. ^ "Syntax and basic data types". W3.org. Retrieved 2016-10-21.
  4. ^ Pipes, Alan (2005). Production for Graphic Designers (4th ed.). Laurence King Publishing. pp. 48–49.
  5. ^ Montagnes, Ian (1991). Editing and Publication: A Training Manual. p. 343.
  6. ^ Dahl, Fred (2006). Book Production Procedures for Today's Technology (2nd ed.). Inkwell Publishing Service. p. 21.
  7. ^ Jackson, Hartley Everett (1942). Newspaper Typography, a Textbook for Journalism Classes. Stranford University Press. pp. 36–37.
  • Bringhurst, Robert (1999). The Elements of Typographic Style (2nd ed.). H&M Publishers. pp. 294–295. ISBN 0881791326.
  • Pasko, W. W. (1894). "Pica". American Dictionary of Printing and Bookmaking. H. Lockwood. p. 436.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Pica_(typography)&oldid=751036489"