Jump to content

Polypropylene

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 2405:204:520f:f6be:9df6:cfb8:bee6:720a (talk) at 12:52, 3 December 2016 (→Industrial processes). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Polypropylene
Polypropylene
Polypropylene isotactic
Polypropylene syndiotactic
Names
IUPAC name
poly(propene)
Other names
Polypropylene; Polypropene;
Polipropene 25 [USAN]; Propene polymers;
Propylene polymers; 1-Propene
Identifiers
ChemSpider
  • none
ECHA InfoCard 100.117.813 Edit this at Wikidata
Properties
(C3H6)n
Density 0.855 g/cm3, amorphous

0.946 g/cm3, crystalline

Melting point 130 to 171 °C (266 to 340 °F; 403 to 444 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Polypropylene (PP), also known as polypropene, is a thermoplastic polymer used in a wide variety of applications including packaging and labeling, textiles (e.g., ropes, thermal underwear and carpets), stationery, plastic parts and reusable containers of various types, laboratory equipment, loudspeakers, automotive components, and polymer banknotes. An addition polymer made from the monomer propylene, it is rugged and unusually resistant to many chemical solvents, bases and acids.

Polypropylene has a relatively slippery "low energy surface" that means that many common glues will not form adequate joints. Joining of polypropylene is often done using welding processes.

In 2013, the global market for polypropylene was about 55 million tonnes.[1] Polypropylene is the world's second-most widely produced synthetic plastic, after polyethylene.

Chemical and physical properties

Micrograph of polypropylene

Polypropylene is in many aspects similar to polyethylene, especially in solution behaviour and electrical properties. The additionally present methyl group improves mechanical properties and thermal resistance, while the chemical resistance decreases.[2]: 19  The properties of polypropylene depend on the molecular weight and molecular weight distribution, crystallinity, type and proportion of comonomer (if used) and the isotacticity.[2] In isotactic polypropylene, for example, the CH3 groups are oriented on one side of the carbon backbone. This creates a greater degree of crystallinity and results in a stiffer material that is more resistant to creep than both atactic polypropylene and polyethylene.[3]

Mechanical properties

The density of PP is between 0.895 and 0.92 g/cm³. Therefore, PP is the commodity plastic with the lowest density. With lower density, moldings parts with lower weight and more parts of a certain mass of plastic can be produced. Unlike polyethylene, crystalline and amorphous regions differ only slightly in their density. However, the density of polyethylene can significantly change with fillers.[2]: 24 

The Young's modulus of PP is between 1300 and 1800 N/mm².

Polypropylene is normally tough and flexible, especially when copolymerized with ethylene. This allows polypropylene to be used as an engineering plastic, competing with materials such as acrylonitrile butadiene styrene (ABS). Polypropylene is reasonably economical.

Polypropylene has good resistance to fatigue.[4]: 307 

Thermal properties

The melting point of polypropylene occurs at a range, so a melting point is determined by finding the highest temperature of a differential scanning calorimetry chart. Perfectly isotactic PP has a melting point of 171 °C (340 °F). Commercial isotactic PP has a melting point that ranges from 160 to 166 °C (320 to 331 °F), depending on atactic material and crystallinity. Syndiotactic PP with a crystallinity of 30% has a melting point of 130 °C (266 °F).[4] Below 0 °C, PP becomes brittle.[5]: 247 

The thermal expansion of polypropylene is very large, but somewhat less than that of polyethylene.[5]

Chemical properties

Polypropylene is at room temperature resistant to fats and almost all organic solvents, apart from strong oxidants. Non-oxidizing acids and bases can be stored in containers made of PP. At elevated temperature, PP can be dissolved in nonpolarity solvents such as xylene, tetralin and decalin. Due to the tertiary carbon atom PP is chemically less resistant than PE (see Markovnikov rule).[6]

Most commercial polypropylene is isotactic and has an intermediate level of crystallinity between that of low-density polyethylene (LDPE) and high-density polyethylene (HDPE). Isotactic & atactic polypropylene is soluble in P-xylene at 140 °C. Isotactic precipitates when the solution is cooled to 25 °C and atactic portion remains soluble in P-xylene.

The melt flow rate (MFR) or melt flow index (MFI) is a measure of molecular weight of polypropylene. The measure helps to determine how easily the molten raw material will flow during processing. Polypropylene with higher MFR will fill the plastic mold more easily during the injection or blow-molding production process. As the melt flow increases, however, some physical properties, like impact strength, will decrease.

There are three general types of polypropylene: homopolymer, random copolymer, and block copolymer. The comonomer is typically used with ethylene. Ethylene-propylene rubber or EPDM added to polypropylene homopolymer increases its low temperature impact strength. Randomly polymerized ethylene monomer added to polypropylene homopolymer decreases the polymer crystallinity, lowers the melting point and makes the polymer more transparent.

Degradation

Polypropylene is liable to chain degradation from exposure to heat and UV radiation such as that present in sunlight. Oxidation usually occurs at the tertiary carbon atom present in every repeat unit. A free radical is formed here, and then reacts further with oxygen, followed by chain scission to yield aldehydes and carboxylic acids. In external applications, it shows up as a network of fine cracks and crazes that become deeper and more severe with time of exposure. For external applications, UV-absorbing additives must be used. Carbon black also provides some protection from UV attack. The polymer can also be oxidized at high temperatures, a common problem during molding operations. Anti-oxidants are normally added to prevent polymer degradation. Microbial communities isolated from soil samples mixed with starch have been shown to be capable of degrading polypropylene.[7] Polypropylene has been reported to degrade while in human body as implantable mesh devices. The degraded material forms a tree bark-like layer at the surface of mesh fibers.[8]

Optical properties

PP can be made translucent when uncolored but is not as readily made transparent as polystyrene, acrylic, or certain other plastics. It is often opaque or colored using pigments.

History

Phillips Petroleum chemists J. Paul Hogan and Robert L. Banks first polymerized propylene in 1951.[9] Propylene was first polymerized to a crystalline isotactic polymer by Giulio Natta as well as by the German chemist Karl Rehn in March 1954.[10] This pioneering discovery led to large-scale commercial production of isotactic polypropylene by the Italian firm Montecatini from 1957 onwards.[11] Syndiotactic polypropylene was also first synthesized by Natta and his coworkers.

Polypropylene is the second most important plastic with revenues expected to exceed US$145 billion by 2019. The sales of this material are forecast to grow at a rate of 5.8% per year until 2021.[1]

Synthesis

Short segments of polypropylene, showing examples of isotactic (above) and syndiotactic (below) tacticity.

An important concept in understanding the link between the structure of polypropylene and its properties is tacticity. The relative orientation of each methyl group (CH
3 in the figure) relative to the methyl groups in neighboring monomer units has a strong effect on the polymer's ability to form crystals.

A Ziegler-Natta catalyst is able to restrict linking of monomer molecules to a specific regular orientation, either isotactic, when all methyl groups are positioned at the same side with respect to the backbone of the polymer chain, or syndiotactic, when the positions of the methyl groups alternate. Commercially available isotactic polypropylene is made with two types of Ziegler-Natta catalysts. The first group of the catalysts encompasses solid (mostly supported) catalysts and certain types of soluble metallocene catalysts. Such isotactic macromolecules coil into a helical shape; these helices then line up next to one another to form the crystals that give commercial isotactic polypropylene many of its desirable properties.

A ball-and-stick model of syndiotactic polypropylene.

Another type of metallocene catalysts produce syndiotactic polypropylene. These macromolecules also coil into helices (of a different type) and form crystalline materials.

When the methyl groups in a polypropylene chain exhibit no preferred orientation, the polymers are called atactic. Atactic polypropylene is an amorphous rubbery material. It can be produced commercially either with a special type of supported Ziegler-Natta catalyst or with some metallocene catalysts.

Modern supported Ziegler-Natta catalysts developed for the polymerization of propylene and other 1-alkenes to isotactic polymers usually use TiCl
4 as an active ingredient and MgCl
2 as a support.[12][13][14] The catalysts also contain organic modifiers, either aromatic acid esters and diesters or ethers. These catalysts are activated with special cocatalysts containing an organoaluminum compound such as Al(C2H5)3 and the second type of a modifier. The catalysts are differentiated depending on the procedure used for fashioning catalyst particles from MgCl2 and depending on the type of organic modifiers employed during catalyst preparation and use in polymerization reactions. Two most important technological characteristics of all the supported catalysts are high productivity and a high fraction of the crystalline isotactic polymer they produce at 70–80 °C under standard polymerization conditions. Commercial synthesis of isotactic polypropylene is usually carried out either in the medium of liquid propylene or in gas-phase reactors.

Commercial synthesis of syndiotactic polypropylene is carried out with the use of a special class of metallocene catalysts. They employ bridged bis-metallocene complexes of the type bridge-(Cp1)(Cp2)ZrCl2 where the first Cp ligand is the cyclopentadienyl group, the second Cp ligand is the fluorenyl group, and the bridge between the two Cp ligands is -CH2-CH2-, >SiMe2, or >SiPh2.[15] These complexes are converted to polymerization catalysts by activating them with a special organoaluminum cocatalyst, methylaluminoxane (MAO).[16]

Industrial processes

Traditionally, three manufacturing processes are the most representative ways to produce polypropylene.[17]

Hydrocarbon slurry or suspension: Uses a liquid inert hydrocarbon diluent in the reactor to facilitate transfer of propylene to the catalyst, the removal of heat from the system, the deactivation/removal of the catalyst as well as dissolving the atactic polymer. The range of grades that could be produced was very limited. (The technology has fallen into disuse).

Bulk slurry (or bulk): Uses liquid propylene instead of liquid inert hydrocarbon diluent. The polymer does not dissolve into a diluent, but rather rides on the liquid propylene. The formed polymer is withdrawn and any unreacted monomer is flashed off.

Gas phase: Uses gaseous propylene in contact with the solid catalyst, resulting in a fluidized-bed medium.

Manufacturing

Melting process of polypropylene can be achieved via extrusion and molding. Common extrusion methods include production of melt-blown and spun-bond fibers to form long rolls for future conversion into a wide range of useful products, such as face masks, filters, diapers and wipes.

The most common shaping technique is injection molding, which is used for parts such as cups, cutlery, vials, caps, containers, housewares, and automotive parts such as batteries. The related techniques of blow molding and injection-stretch blow molding are also used, which involve both extrusion and molding.

The large number of end-use applications for polypropylene are often possible because of the ability to tailor grades with specific molecular properties and additives during its manufacture. For example, antistatic additives can be added to help polypropylene surfaces resist dust and dirt. Many physical finishing techniques can also be used on polypropylene, such as machining. Surface treatments can be applied to polypropylene parts in order to promote adhesion of printing ink and paints.

Biaxially oriented polypropylene (BOPP)

When polypropylene film is extruded and stretched in both the machine direction and across machine direction it is called biaxially oriented polypropylene. Biaxial orientation increases strength and clarity.[18] BOPP is widely used as a packaging material for packaging products such as snack foods, fresh produce and confectionery. It is easy to coat, print and laminate to give the required appearance and properties for use as a packaging material. This process is normally called converting. It is normally produced in large rolls which are slit on slitting machines into smaller rolls for use on packaging machines.

With the increase in the level of performance required for polypropylene quality in recent years, a variety of ideas and contrivances have been integrated into the production process for polypropylene.[19]

There are roughly two directions for the specific methods. One is improvement of uniformity of the polymer particles produced using a circulation type reactor, and the other is improvement in the uniformity among polymer particles produced by using a reactor with a narrow retention time distribution.

Applications

Polypropylene lid of a Tic Tacs box, with a living hinge and the resin identification code under its flap

As polypropylene is resistant to fatigue, most plastic living hinges, such as those on flip-top bottles, are made from this material. However, it is important to ensure that chain molecules are oriented across the hinge to maximise strength.

Very thin sheets (~2–20 µm) of polypropylene are used as a dielectric within certain high-performance pulse and low-loss RF capacitors.

Polypropylene is used in the manufacturing piping systems; both ones concerned with high-purity and ones designed for strength and rigidity (e.g. those intended for use in potable plumbing, hydronic heating and cooling, and reclaimed water).[20] This material is often chosen for its resistance to corrosion and chemical leaching, its resilience against most forms of physical damage, including impact and freezing, its environmental benefits, and its ability to be joined by heat fusion rather than gluing.[21][22][23]

A polypropylene chair

Many plastic items for medical or laboratory use can be made from polypropylene because it can withstand the heat in an autoclave. Its heat resistance also enables it to be used as the manufacturing material of consumer-grade kettles[citation needed]. Food containers made from it will not melt in the dishwasher, and do not melt during industrial hot filling processes. For this reason, most plastic tubs for dairy products are polypropylene sealed with aluminum foil (both heat-resistant materials). After the product has cooled, the tubs are often given lids made of a less heat-resistant material, such as LDPE or polystyrene. Such containers provide a good hands-on example of the difference in modulus, since the rubbery (softer, more flexible) feeling of LDPE with respect to polypropylene of the same thickness is readily apparent. Rugged, translucent, reusable plastic containers made in a wide variety of shapes and sizes for consumers from various companies such as Rubbermaid and Sterilite are commonly made of polypropylene, although the lids are often made of somewhat more flexible LDPE so they can snap on to the container to close it. Polypropylene can also be made into disposable bottles to contain liquid, powdered, or similar consumer products, although HDPE and polyethylene terephthalate are commonly also used to make bottles. Plastic pails, car batteries, wastebaskets, pharmacy prescription bottles, cooler containers, dishes and pitchers are often made of polypropylene or HDPE, both of which commonly have rather similar appearance, feel, and properties at ambient temperature.

Polypropylene items for laboratory use, blue and orange closures are not made of polypropylene.

A common application for polypropylene is as biaxially oriented polypropylene (BOPP). These BOPP sheets are used to make a wide variety of materials including clear bags. When polypropylene is biaxially oriented, it becomes crystal clear and serves as an excellent packaging material for artistic and retail products.

Polypropylene, highly colorfast, is widely used in manufacturing carpets, rugs and mats to be used at home.[24]

Polypropylene is widely used in ropes, distinctive because they are light enough to float in water.[25] For equal mass and construction, polypropylene rope is similar in strength to polyester rope. Polypropylene costs less than most other synthetic fibers.

Polypropylene is also used as an alternative to polyvinyl chloride (PVC) as insulation for electrical cables for LSZH cable in low-ventilation environments, primarily tunnels. This is because it emits less smoke and no toxic halogens, which may lead to production of acid in high-temperature conditions.

Polypropylene is also used in particular roofing membranes as the waterproofing top layer of single-ply systems as opposed to modified-bit systems.

Polypropylene is most commonly used for plastic moldings, wherein it is injected into a mold while molten, forming complex shapes at relatively low cost and high volume; examples include bottle tops, bottles, and fittings.

It can also be produced in sheet form, widely used for the production of stationery folders, packaging, and storage boxes. The wide color range, durability, low cost, and resistance to dirt make it ideal as a protective cover for papers and other materials. It is used in Rubik's Cube stickers because of these characteristics.

The availability of sheet polypropylene has provided an opportunity for the use of the material by designers. The light-weight, durable, and colorful plastic makes an ideal medium for the creation of light shades, and a number of designs have been developed using interlocking sections to create elaborate designs.

Polypropylene sheets are a popular choice for trading card collectors; these come with pockets (nine for standard-size cards) for the cards to be inserted and are used to protect their condition and are meant to be stored in a binder.

Expanded polypropylene (EPP) is a foam form of polypropylene. EPP has very good impact characteristics due to its low stiffness; this allows EPP to resume its shape after impacts. EPP is extensively used in model aircraft and other radio controlled vehicles by hobbyists. This is mainly due to its ability to absorb impacts, making this an ideal material for RC aircraft for beginners and amateurs.

Polypropylene is used in the manufacture of loudspeaker drive units. Its use was pioneered by engineers at the BBC and the patent rights subsequently purchased by Mission Electronics for use in their Mission Freedom Loudspeaker and Mission 737 Renaissance loudspeaker.

Polypropylene fibres are used as a concrete additive to increase strength and reduce cracking and spalling.[26] In the areas susceptible to earthquake, i.e., California, PP fibers are added with soils to improve the soils strength and damping when constructing the foundation of structures such as buildings, bridges, etc.[27]

Polypropylene is used in polypropylene drums.

In June 2016, a study showed that a mixture of polypropylene and durable superoleophobic surfaces created by two engineers from Ohio State University can repel liquids such as shampoo and oil. This technology could make it easier to remove all the liquid contents from a polypropylene bottles, particularly those that have high surface tension such as shampoo or oil.[28]

Clothing

Various polypropylene yarns and textiles

Polypropylene is a major polymer used in nonwovens, with over 50% used[citation needed] for diapers or sanitary products where it is treated to absorb water (hydrophilic) rather than naturally repelling water (hydrophobic). Other interesting non-woven uses include filters for air, gas, and liquids in which the fibers can be formed into sheets or webs that can be pleated to form cartridges or layers that filter in various efficiencies in the 0.5 to 30 micrometre range. Such applications occur in houses as water filters or in air-conditioning-type filters. The high surface-area and naturally oleophilic polypropylene nonwovens are ideal absorbers of oil spills with the familiar[citation needed] floating barriers near oil spills on rivers.

Polypropylene, or 'polypro', has been used for the fabrication of cold-weather base layers, such as long-sleeve shirts or long underwear. Polypropylene is also used in warm-weather clothing, in which it transports sweat away from the skin. More recently,[when?] polyester has replaced polypropylene in these applications in the U.S. military, such as in the ECWCS.[29] Although polypropylene clothes are not easily flammable, they can melt, which may result in severe burns if the wearer is involved in an explosion or fire of any kind.[30] Polypropylene undergarments are known for retaining body odors which are then difficult to remove. The current generation of polyester does not have this disadvantage.[31]

Some fashion designers have adapted polypropylene to construct jewelry and other wearable items.[citation needed]

Medical

Its most common medical use is in the synthetic, nonabsorbable suture Prolene, manufactured by Ethicon Inc.

Polypropylene has been used in hernia and pelvic organ prolapse repair operations to protect the body from new hernias in the same location. A small patch of the material is placed over the spot of the hernia, below the skin, and is painless and rarely, if ever, rejected by the body. However, a polypropylene mesh will erode the tissue surrounding it over the uncertain period from days to years. Therefore, the FDA has issued several warnings on the use of polypropylene mesh medical kits for certain applications in pelvic organ prolapse, specifically when introduced in close proximity to the vaginal wall due to a continued increase in number of mesh-driven tissue erosions reported by patients over the past few years.[32] Most recently, on 3 January 2012, the FDA ordered 35 manufacturers of these mesh products to study the side effects of these devices.

Initially considered inert, polypropylene has been found to degrade while in the body. The degraded material forms a bark-like shell on the mesh fibers and is prone to cracking.[8]

EPP model aircraft

Since 2001, expanded polypropylene (EPP) foams have been gaining in popularity and in application as a structural material in hobbyist radio control model aircraft. Unlike expanded polystyrene foam (EPS) which is friable and breaks easily on impact, EPP foam is able to absorb kinetic impacts very well without breaking, retains its original shape, and exhibits memory form characteristics which allow it to return to its original shape in a short amount of time.[33] In consequence, a radio-control model whose wings and fuselage are constructed from EPP foam is extremely resilient, and able to absorb impacts that would result in complete destruction of models made from lighter traditional materials, such as balsa or even EPS foams. EPP models, when covered with inexpensive fibreglass impregnated self-adhesive tapes, often exhibit much increased mechanical strength, in conjunction with a lightness and surface finish that rival those of models of the aforementioned types. EPP is also chemically highly inert, permitting the use of a wide variety of different adhesives. EPP can be heat molded, and surfaces can be easily finished with the use of cutting tools and abrasive papers. The principal areas of model making in which EPP has found great acceptance are the fields of:

  • Wind-driven slope soarers
  • Indoor electric powered profile electric models
  • Hand launched gliders for small children

In the field of slope soaring, EPP has found greatest favour and use, as it permits the construction of radio-controlled model gliders of great strength and maneuverability. In consequence, the disciplines of slope combat (the active process of friendly competitors attempting to knock each other's planes out of the air by direct contact) and slope pylon racing have become commonplace, in direct consequence of the strength characteristics of the material EPP.

EPP has been produced through both solid and melt state processing. Manufacturing of EPP using melt processing with either chemical or physical blowing agents has been successful. Expansion of PP in solid state, due to its highly crystalline structure, has not been successful. In this regard, two novel strategies were developed for expansion of PP. It was observed that PP can be expanded to make EPP through controlling its crystalline structure or through blending with other polymers.,[34][35]

Building construction

When the cathedral on Tenerife, La Laguna Cathedral, was repaired in 2002–2014, it turned out that the vaults and dome were in a rather bad condition. Therefore, these parts of the building were demolished, and replaced by constructions in polypropylene. This was reported as the first time this material was used in this scale in buildings.[citation needed]

Rope

Under the trade name Ulstron polypropylene rope is used to manufacture scoop nets for whitebait. It has also been used for sheets of yacht sails.[36][37]

Recycling

Polypropylene is recyclable and has the number "5" as its resin identification code:[38] the number 5 surrounded by a recycling symbol, with the letters "PP" below

Repairing

Many objects are made with polypropylene precisely because it is resilient and resistant to most solvents and glues. Also, there are very few glues available specifically for gluing PP. However, solid PP objects not subject to undue flexing can be satisfactorily joined with a two part epoxy glue or using hot-glue guns. Preparation is important and it is often helpful to roughen the surface with a file, emery paper or other abrasive material to provide better anchorage for the glue. Also it is recommended to clean with mineral spirits or similar alcohol prior to gluing to remove any oils or other contamination. Some experimentation may be required. There are also some industrial glues available for PP, but these can be difficult to find, especially in a retail store.[citation needed]

PP can be melted using a speed welding technique. With speed welding, the plastic welder, similar to a soldering iron in appearance and wattage, is fitted with a feed tube for the plastic weld rod. The speed tip heats the rod and the substrate, while at the same time it presses the molten weld rod into position. A bead of softened plastic is laid into the joint, and the parts and weld rod fuse. With polypropylene, the melted welding rod must be "mixed" with the semi-melted base material being fabricated or repaired. A speed tip "gun" is essentially a soldering iron with a broad, flat tip that can be used to melt the weld joint and filler material to create a bond.

Health concerns

The Environmental Working Group classifies PP as of low to moderate hazard.[39] PP is dope-dyed, no water is used in its dyeing, in contrast with cotton.[40]

In 2008, researchers in Canada asserted that quaternary ammonium biocides and oleamide were leaking out of certain polypropylene labware, affecting experimental results.[41] As polypropylene is used in a wide number of food containers such as those for yogurt, Health Canada media spokesman Paul Duchesne said the department will be reviewing the findings to determine if steps are needed to protect consumers.[42]

References

  1. ^ a b "Market Study: Polypropylene (3rd edition)". Ceresana.
  2. ^ a b c Tripathi, D. (2001). Practical guide to polypropylene. Shrewsbury: RAPRA Technology. ISBN 1859572820.
  3. ^ "Polypropylene Plastic Materials & Fibers by Porex". www.porex.com. Retrieved 2016-11-09.
  4. ^ a b Maier, Clive; Calafut, Teresa (1998). Polypropylene: the definitive user's guide and databook. William Andrew. p. 14. ISBN 978-1-884207-58-7.
  5. ^ a b Kaiser, Wolfgang (2011). Kunststoffchemie für Ingenieure von der Synthese bis zur Anwendung (3. ed.). München: Hanser. ISBN 978-3-446-43047-1.
  6. ^ Nuyken, von Sebastian Koltzenburg, Michael Maskos, Oskar (2013). Polymere : Synthese, Eigenschaften und Anwendungen (1., 2013 ed.). [S.l.]: Springer. ISBN 978-3642347726.{{cite book}}: CS1 maint: multiple names: authors list (link)
  7. ^ Cacciari, I.; Quatrini, P.; Zirletta, G.; Mincione, E.; Vinciguerra, V.; Lupattelli, P.; Giovannozzi Sermanni, G. (1993). "Isotactic polypropylene biodegradation by a microbial community: Physicochemical characterization of metabolites produced". Applied and Environmental Microbiology. 59 (11): 3695–3700. PMC 182519. PMID 8285678.
  8. ^ a b Iakovlev, V.; Guelcher, S.; Bendavid, R. (August 28, 2015). "Degradation of polypropylene in vivo: A microscopic analysis of meshes explanted from patients". Journal of Biomedical Materials Research Part B: Applied Biomaterials: n/a. doi:10.1002/jbm.b.33502.
  9. ^ Stinson, Stephen (9 March 1987). "Discoverers of Polypropylene Share Prize". Chemical & Engineering News. No. Volume 65, Number 10. American Chemical Society. p. 30. doi:10.1021/cen-v065n010.p030. {{cite news}}: |issue= has extra text (help)
  10. ^ Morris, Peter J. T. (2005). Polymer Pioneers: A Popular History of the Science and Technology of Large Molecules. Chemical Heritage Foundation. p. 76. ISBN 0-941901-03-3.
  11. ^ This week 50 years ago in New Scientist 28 April 2007, p. 15
  12. ^ Kissin, Y. V. (2008). Alkene Polymerization Reactions with Transition Metal Catalysts. Elsevier. pp. 207–. ISBN 978-0-444-53215-2.
  13. ^ Hoff, Ray; Mathers, Robert T. (2010). Handbook of Transition Metal Polymerization Catalysts. John Wiley & Sons. pp. 158–. ISBN 978-0-470-13798-7. {{cite book}}: Unknown parameter |lastauthoramp= ignored (|name-list-style= suggested) (help)
  14. ^ Moore, E. P. (1996) Polypropylene Handbook. Polymerization, Characterization, Properties, Processing, Applications, Hanser Publishers: New York, ISBN 1569902089
  15. ^ Benedikt, G. M. and Goodall, B. L. (eds.) (1998) Metallocene Catalyzed Polymers, ChemTech Publishing: Toronto. ISBN 978-1-884207-59-4.
  16. ^ Sinn, H.; Kaminsky, W. and Höker, H. (eds.) (1995) Alumoxanes, Macromol. Symp. 97, Huttig & Wepf: Heidelberg.
  17. ^ "Polypropylene Production via Gas Phase Process, Technology Economics Program". by Intratec, ISBN 978-0-615-66694-5, Q3 2012.
  18. ^ Biaxially Oriented Polypropylene Films. Granwell. Retrieved: 2012-05-31.
  19. ^ Sato, Hideki and Ogawa, Hiroyuki (2009) Review on Development of Polypropylene Manufacturing Process, Sumitomo Kagaku.
  20. ^ ASTM Standard F2389, 2007, "Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems", ASTM International, West Conshohocken, PA, 2007, doi:10.1520/F2389-07E01, www.astm.org.
  21. ^ Green pipe helps miners remove the black Contractor Magazine, 10 January 2010
  22. ^ Contractor Retrofits His Business. the News/ 2 November 2009.
  23. ^ What to do when the piping replacement needs a replacement? Engineered Systems. 1 November 2009.
  24. ^ Rug fibers. Fibersource.com. Retrieved on 2012-05-31.
  25. ^ Braided Polypropylene Rope is Inexpensive and it Floats. contractorrope.com. Retrieved on 2013-02-28.
  26. ^ Bayasi, Ziad; Zeng, Jack (1993). "Properties of Polypropylene Fiber Reinforced". Materials Journal. 90 (6): 605–610. doi:10.14359/4439. {{cite journal}}: Unknown parameter |lastauthoramp= ignored (|name-list-style= suggested) (help)
  27. ^ Amir-Faryar, Behzad; Aggour, M. Sherif (2015). "Effect of fibre inclusion on dynamic properties of clay". Geomechanics and Geoengineering: an International Journal: 1–10. doi:10.1080/17486025.2015.1029013. {{cite journal}}: Unknown parameter |lastauthoramp= ignored (|name-list-style= suggested) (help)
  28. ^ Yin, Steph (2016-06-26). "Bottles That Could Make Every Drop of Shampoo Count". The New York Times. ISSN 0362-4331. Retrieved 2016-07-12.
  29. ^ Generation III Extended Cold Weather Clothing System (ECWCS). PM Soldier Equipment. October 2008
  30. ^ USAF Flying Magazine. Safety. Nov. 2002. access.gpo.gov
  31. ^ Ellis, David. Get Real: The true story of performance next to skin fabrics. outdoorsnz.org.nz
  32. ^ FDA Public Health Notification: Serious Complications Associated with Transvaginal Placement of Surgical Mesh in Repair of Pelvic Organ Prolapse and Stress Urinary Incontinence, FDA, 20 October 2008
  33. ^ Sadighi, Mojtaba; Salami, Sattar Jedari (2012). "An investigation on low-velocity impact response of elastomeric & crushable foams". Central European Journal of Engineering. 2 (4): 627–637. Bibcode:2012OEng....2..627S. doi:10.2478/s13531-012-0026-0.
  34. ^ Doroudiani, S; et, al. (1996). "Effect of the crystallinity and morphology on the microcellular foam structure of semicrystalline polymers". Polymer Engineering & Science. 36 (21): 2645–2662. doi:10.1002/pen.10664.
  35. ^ Doroudiani, S; et, al. (1998). "Processing and characterization of microcellular foamed high‐density polythylene/isotactic polypropylene blends". Polymer Engineering & Science. 38 (7): 1205–1215. doi:10.1002/pen.10289.
  36. ^ http://www.nacsan.co.nz/products/whitebait-nets/netting/
  37. ^ Product leaflet for Vivacity 650 yacht, 1970s
  38. ^ Plastics recycling information sheet, Waste Online
  39. ^ POLYPROPYLENE || Skin Deep® Cosmetics Database | Environmental Working Group. Cosmeticdatabase.com. Retrieved on 2012-05-31.
  40. ^ Chapagain, A.K. et al. (September 2005) The water footprint of cotton consumption. UNESCO-IHE Delft. Value of Water Research Report Series No. 18. waterfootprint.org
  41. ^ Plastic additives leach into medical experiments, research shows, Physorg.com, 10 November 2008
  42. ^ "Scientific tests skewed by leaching plastics". Chilliwack Times. Canwest News Service. November 6, 2008. Archived from the original on April 7, 2016. Retrieved 31 July 2016.
Wikimedia Commons has media related to Polypropylene.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Polypropylene&oldid=752808978"