Jump to content

RP 125-class tugboat

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by LittleWink (talk | contribs) at 19:24, 20 December 2016 (Cat-a-lot: Removing from Category:Ships of the Italian Navy). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Class overview
NameRP 125 class
Builders
Operators Italian Navy
In commission1983/1984
Building10
Completed10
Active10
General characteristics
TypeHarbour tugboat
Displacement76.4 t (75.2 long tons) full load
Length19.9 m (65 ft) LOA
Beam5.2 m (17 ft)
Draught2.4 m (7.9 ft)
Propulsion
Speed9.5 knots (17.6 km/h; 10.9 mph)
Range400 nautical miles (740 km; 460 mi) at 9.5 knots (17.6 km/h; 10.9 mph)
Crew3

The RP-125 class of Harbour tugboats consists of 10 units (the fourth batch) built for the Marina Militare, named as Rimorchiatore Portuale[2]

Ships

 Italian Navy - RP 125 class / IV batch
Name Pennant
number
Shipyard Laid down Launched Commissioned Decommissioned Note
RP 125 Y 478 Cantiere Navale Vittoria Adria (Rovigo) 1983 [3]
RP 126 Y 479 Cantiere Navale Vittoria Adria (Rovigo) 1983
RP 127 Y 480 Cantiere Navale Ferrari La Spezia 1984 [4]
RP 128 Y 481 Cantiere Navale Ferrari La Spezia 1984 [5]
RP 129 Y 482 Cantiere Navale Ferrari La Spezia 1984 [6]
RP 130 Y 483 Cantiere Navale Ferrari La Spezia 1984
RP 131 Y 484 Cantiere Navale Ferrari La Spezia 1984 [7]
RP 134 Y 487 Cantiere Navale Ferrari La Spezia 1984
RP 132 Y 485 Cantiere Navale CINET Molfetta (Bari) 1984 [8]
RP 133 Y 486 Cantiere Navale CINET Molfetta (Bari) 1984 [9]

References