Jump to content

User:Dirk Hünniger/play

From Wikipedia, the free encyclopedia
The exponential function y = ex (continuous red line) and the corresponding Taylor polynomial of degree four (dashed green line) around the origin.

In calculus, Taylor's theorem gives an approximation of a k times differentiable function around a given point by a k-th order Taylor-polynomial. For analytic functions the Taylor polynomials at a given point are finite order truncations of its Taylor's series, which completely determines the function in some neighborhood of the point. The exact content of "Taylor's theorem" is not universally agreed upon. Indeed, there are several versions of it applicable in different situations, and some of them contain explicit estimates on the approximation error of the function by its Taylor-polynomial.

Taylor's theorem is named after the mathematician Brook Taylor, who stated a version of it in 1712. Yet, an explicit expression of the error was provided much later on by Joseph-Louis Lagrange. An earlier version of the result is already mentioned in 1671 by James Gregory.

Taylor's theorem is taught on introductory level calculus courses and it is one of the central elementary tools in mathematical analysis. Within pure mathematics it is the starting point of more advanced asymptotic analysis, and it is commonly used in more applied fields of numerics as well as in mathematical physics. Taylor's theorem also generalizes to multivariate and vector valued functions f : RnRm on any dimensions n and m. This generalization of Taylor's theorem is the basis for the definition of so-called jets which appear in differential geometry and partial differential equations.

Motivation

[edit]
Graph of f(x) = ex (blue) with its linear approximation P1(x) = 1 + x (red) at a = 0.

If a real-valued function f is differentiable at the point a then it has a linear approximation at the point a. This means that there exists a function h1 such that

Here

is the linear approximation of f at the point a. The graph of y = P1(x) is the tangent line to the graph of f at x = a. The error in the approximation is

Note that this goes to zero a little bit faster than xa as x tends to a.

Graph of f(x)=ex (blue) with its quadratic approximation P2(x) = 1 + x + x2/2 (red) at a = 0. Note the improvement in the approximation.

If we wanted a better approximation to f, we might instead try a quadratic polynomial instead of a linear function. Instead of just matching one derivative of f at a, we can match two derivatives, thus producing a polynomial that has the same slope and concavity as f at a. The quadratic polynomial in question is

Taylor's theorem ensures that the quadratic approximation is, in a sufficiently small neighborhood of the point a, a better approximation than the linear approximation. Specifically,

Here the error in the approximation is

which, given the limiting behavior of h2, goes to zero faster than (xa)2 as x tends to a.

Approximation of f(x) = 1/(1 + x2) by its Taylor polynomials Pk of order k = 1, ..., 16 centered at x = 0 (red) and x = 1 (green). The approximations do not improve at all outside (-1,1) and (1-√2,1+√2), respectively.

Similarly, we get still better approximations to f if we use polynomials of higher degree, since then we can match even more derivatives with f at the selected base point. In general, the error in approximating a function by a polynomial of degree k will go to zero a little bit faster than (xa)k as x tends to a.

This result is of asymptotic nature: it only tells us that the error Rk in an approximation by a k-th order Taylor polynomial Pk tends to zero faster than any nonzero k-th degree polynomial as x → a. It does not tell us how large the error is in any concrete neighborhood of the center of expansion, but for this purpose there are explicit formulae for the remainder term (given below) which are valid under some additional regularity assumptions on f. These enhanced versions of Taylor's theorem typically lead to uniform estimates for the approximation error in a small neighborhood of the center of expansion, but the estimates do not necessarily hold for neighborhoods which are too large, even if the function f is analytic. In that situation one may have to select several Taylor polynomials with different centers of expansion to have reliable Taylor-approximations of the original function (see animation on the right.)

It is also possible that increasing the degree of the approximating polynomial does not increase the quality of approximation at all even if the function f to be approximated is infinitely many times differentiable. An example of this behavior is given below, and it is related to the fact that unlike analytic functions, more general functions are not (locally) determined by the values of their derivatives at a single point.

Taylor's theorem in one real variable

[edit]

Statement of the theorem

[edit]

The precise statement of the most basic version of Taylor's theorem is as follows.

Taylor's theorem.[1] Let k ≥ 1 be an integer and let the function f : RR be k times differentiable at the point aR. Then there exists a function hk : RR such that

The polynomial appearing in Taylor's theorem is the k-th order Taylor polynomial

of the function f at the point a. The Taylor polynomial is the unique "asymptotic best fit" polynomial in the sense that if there exists a function hk : RR and a k-th order polynomial p such that

then p = Pk. Taylor's theorem describes the asymptotic behavior of the remainder term

which is the approximation error when approximating f with its Taylor polynomial. Using the little-o notation the statement in Taylor's theorem reads as

Explicit formulae for the remainder

[edit]

Under stronger regularity assumptions on f there are several precise formulae for the remainder term Rk of the Taylor polynomial, the most common ones being the following.

Mean-value forms of the remainder. Let f : RR be k+1 times differentiable on the open interval and continuous on the closed interval between a and x. Then

for some real number ξL between a and x. This is the Lagrange form[2] of the remainder. Similarly,

for some real number ξC between a and x. This is the Cauchy form[3] of the remainder.

These refinements of Taylor's theorem are usually proved using the mean value theorem, whence the name. Also other similar expressions can be found. For example, if G(t) is continuous on the closed interval and differentiable with a non-vanishing derivative on the open interval between a and x, then

for some number ξ between a and x. This version covers the Lagrange and Cauchy forms of the remainder as special cases, and is proved below using Cauchy's mean value theorem.

The statement for the integral form of the remainder is more advanced than the previous ones, and requires understanding of Lebesgue integration theory for the full generality. However, it holds also in the sense of Riemann integral provided the (k+1)-st derivative of f is continuous on the closed interval [a,x].

Integral form[4] of the remainder. Let f(k) be absolutely continuous on the closed interval between a and x. Then

Due to absolute continuity of f(k) on the closed interval between a and x its derivative f(k+1) exists as an L1-function, and the result can be proven by a formal calculation using fundamental theorem of calculus and integration by parts.

Estimates for the remainder

[edit]

It is often useful in practice to be able to estimate the remainder term appearing in the Taylor approximation, rather than having a specific form of it. Suppose that f is (k+1)-times continuously differentiable in an interval I containing a. Suppose that there are real constants q and Q such that

throughout I. Then the remainder term satisfies the inequality[5]

if x > a, and a similar estimate if x < a. This is a simple consequence of the Lagrange form of the remainder. In particular, if

on an interval I = (ar,a+r) with some r>0, then

for all x∈(ar,a+r). The second inequality is called a uniform estimate, because it holds uniformly for all x on the interval (ar,a+r).

Example

[edit]
Approximation of ex (blue) by its Taylor polynomials Pk of order k=1,...,7 centered at x=0 (red).

Suppose that we wish to approximate the function f(x) = ex on the interval [−1,1] while ensuring that the error in the approximation is no more than 10−5. In this example we pretend that we only know the following properties of the exponential function:

From these properties it follows that f(k)(x) = ex for all k, and in particular, f(k)(0) = 1. Hence the k-th order Taylor polynomial of f at 0 and its remainder term in the Lagrange form are given by

where ξ is some number between 0 and x. Since ex is increasing by (*), we can simply use ex ≤ 1 for x ∈ [−1, 0] to estimate the remainder on the subinterval [−1, 0]. To obtain an upper bound for the remainder on [0,1], we use the property eξ<ex for 0<ξ<x to estimate

using the second order Taylor expansion. Then we solve for ex to deduce that

simply by maximizing the numerator and minimizing the denominator. Combining these estimates for ex we see that

so the required precision is certainly reached, when

(See factorial or compute by hand the values 9!=362 880 and 10!=3 628 800.) As a conclusion, Taylor's theorem leads to the approximation

For instance, this approximation provides a decimal expression e≈2.71828, correct up to five decimal places.

Relationship to analyticity

[edit]

Taylor expansions of real analytic functions

[edit]

Let IR be an open interval. By definition, a function f:IR is real analytic if it is locally defined by a convergent power series. This means that for every a ∈ I there exists some r > 0 and a sequence of coefficients ck ∈ R such that (ar, a + r) ⊂ I and

In general, the radius of convergence of a power series can be computed from the Cauchy–Hadamard formula

This result is based on comparison with a geometric series, and the same method shows that if the power series based on a converges for some bR, it must converge uniformly on the closed interval [arb, a + rb], where rb = |b − a|. Here only the convergence of the power series is considered, and it might well be that (aR,a + R) extends beyond the domain I of f.

The Taylor polynomials of the real analytic function f at a are simply the finite truncations

of its locally defining power series, and the corresponding remainder terms are locally given by the analytic functions

Here the functions

are also analytic, since their defining power series have the same radius of convergence as the original series. Assuming that [ar, a + r]I and r < R, all these series converge uniformly on (ar, a + r). Naturally, in the case of analytic functions one can estimate the remainder term Rk(x) by the tail of the sequence of the derivatives f′(a) at the center of the expansion, but using complex analysis also another possibility arises, which is described below.

Taylor's theorem and convergence of Taylor series

[edit]

There is a source of confusion on the relationship between Taylor polynomials of smooth functions and the Taylor series of analytic functions. One can (rightfully) see the Taylor series

of an infinitely many times differentiable function f:RR as its "infinite order Taylor polynomial" at a. Now the estimates for the remainder of a Taylor polynomial implies that for any order k and for any r>0 there exists a constant Mk,r>0 such that

for every x∈(a-r,a+r). Sometimes these constants can be chosen in such way that Mk,r → 0 when k → ∞ and r stays fixed. Then the Taylor series of f converges uniformly to some analytic function

Here comes the subtle point. It may well be that an infinitely many times differentiable function f has a Taylor series at a which converges on some open neighborhood of a, but the limit function Tf is different from f. An important example of this phenomenon is provided by

Using the chain rule one can show inductively that for any order k,

for some polynomial pk. The function tends to zero faster than any polynomial as x → 0, so f is infinitely many times differentiable and f(k)(0) = 0 for every positive integer k. Now the estimates for the remainder for the Taylor polynomials show that the Taylor series of f converges uniformly to the zero function on the whole real axis. Nothing is wrong in here:

  • The Taylor series of f converges uniformly to the zero function Tf(x)=0.
  • The zero function is analytic and every coefficient in its Taylor series is zero.
  • The function f is infinitely many times differentiable, but not analytic.
  • For any kN and r>0 there exists Mk,r>0 such that the remainder term for the k-th order Taylor polynomial of f satisfies (*).

Taylor's theorem in complex analysis

[edit]

Taylor's theorem generalizes to functions which are complex differentiable in an open subset U ⊂ C of the complex plane. However, its usefulness is diminished by other general theorems in complex analysis. Namely, stronger versions of related results can be deduced for complex differentiable functions f : U → C using Cauchy's integral formula as follows.

Let r > 0 such that the closed disk B(zr) ∪ S(zr) is contained in U. Then Cauchy's integral formula with a positive parametrization γ(t)=reit of the circle S(z,r) with t ∈ [0,2π] gives

Here all the integrands are continuous on the circle S(zr), which justifies differentiation under the integral sign. In particular, if f is once complex differentiable on the open set U, then it is actually infinitely many times complex differentiable on U. One also obtains the Cauchy's estimates[6]

for any z ∈ U and r > 0 such that B(zr) ∪ S(cr) ⊂ U. These estimates imply that the complex Taylor series

of f converges uniformly on any open disk B(cr) ⊂ U with S(cr) ⊂ U into some function Tf. Furthermore, using the contour integral formulae for the derivatives f(k)(c),

so any complex differentiable function f in an open set U ⊂ C is in fact complex analytic. All that is said for real analytic functions here holds also for complex analytic functions with the open interval I replaced by an open subset U ∈ C and a-centered intervals (a − ra + r) replaced by c-centered disks B(cr). In particular, the Taylor expansion holds in the form

where the remainder term Rk is complex analytic. Methods of complex analysis provide some powerful results regarding Taylor expansions. For example, using Cauchy's integral formula for any positively oriented Jordan curve γ which parametrizes the boundary ∂W ⊂ U of a region W ⊂ U, one obtains expressions for the derivatives f(j)(c) as above, and modifying slightly the computation for Tf(z) = f(z), one arrives at the exact formula

The important feature here is that the quality of the approximation by a Taylor polynomial on the region W ⊂ U is dominated by the values of the function f itself on the boundary ∂W ⊂ U. Similarly, applying Cauchy's estimates to the series expression for the remainder, one obtains the uniform estimates

Example

[edit]
Complex plot of f(z) = 1/(1 + z2). Modulus is shown by elevation and argument by coloring: cyan=0, blue=π/3, violet=2π/3, red=π, yellow=4π/3, green=5π/3.

The function f:RR defined by

is real analytic, that is, locally determined by its Taylor series. This function was plotted above to illustrate the fact that some elementary functions cannot be approximated by Taylor polynomials in neighborhoods of the center of expansion which are too large. This kind of behavior is easily understood in the framework of complex analysis. Namely, the function f extends into a meromorphic function

on the compactified complex plane. It has simple poles at z=i and z=−i, and it is analytic elsewhere. Now its Taylor series centered at z0 coverges on any disc B(z0,r) with r<|z-z0|, where the same Taylor series converges at zC. Therefore Taylor series of f centered at 0 converges on B(0,1) and it does not converge for any zC with |z|>1 due to the poles at i and −i. For the same reason the Taylor series of f centered at 1 converges on B(1,√2) and does not converge for any zC with |z-1|>√2.

Generalizations of Taylor's theorem

[edit]

Higher order differentiability

[edit]

A function f:Rn → R is differentiable at a ∈ Rn if and only if there exists a linear functional L : Rn → R and a function h : Rn → R such that

If this is the case, then L = df(a) is the (uniquely defined) differential of f at the point a. Furthermore, then the partial derivatives of f exist at a and the differential of f at a is given by

Introduce the multi-index notation

for α ∈ Nn and x ∈ Rn. If all the k-th order partial derivatives of f : RnR are continuous at aRn, then by Clairaut's theorem, one can change the order of mixed derivatives at a, so the notation

for the higher order partial derivatives is justified in this situation. The same is true if all the (k − 1)-th order partial derivatives of f exist in some neighborhood of a and are differentiable at a. Then we say that f is k times differentiable at the point a .

Taylor's theorem for multivariate functions

[edit]

Multivariate version of Taylor's theorem.[citation needed] Let f : RnR be a k times differentiable function at the point aRn. Then there exists hα : RnR such that

If the function f : RnR is k+1 times continuously differentiable in the closed ball B, then one can derive an exact formula for the remainder in terms of (k+1)-th order partial derivatives of f in this neighborhood. Namely,

In this case, due to the continuity of (k+1)-th order partial derivatives in the compact set B, one immediately obtains the uniform estimates

Proofs

[edit]

Proof for Taylor's theorem in one real variable

[edit]

Let[7]

where, as in the statement of Taylor's theorem,

It is sufficient to show that

The proof here is based on repeated application of L'Hôpital's rule. Note that, for each j = 0,1,...,k−1, . Hence each of the first k−1 derivatives of the numerator in vanishes at , and the same is true of the denominator. So

where the second to last equality follows by the definition of the derivative at x = a.

Derivation for the mean value forms of the remainder

[edit]

Let G be any real-valued function, continuous on the closed interval between a and x and differentiable with a non-vanishing derivative on the open interval between a and x, and define

Then, by Cauchy's mean value theorem,

for some ξ on the open interval between a and x. Note that here the numerator F(x) − F(a) = Rk(x) is exactly the remainder of the Taylor polynomial for f(x). Compute

plug it into (*) and rearrange terms to find that

This is the form of the remainder term mentioned after the actual statement of Taylor's theorem with remainder in the mean value form. The Lagrange form of the remainder is found by choosing and the Cauchy form by choosing .

Remark. Using this method one can also recover the integral form of the remainder by choosing

but the requirements for f needed for the use of mean value theorem are too strong, if one aims to prove the claim in the case that f(k) is only absolutely continuous. However, if one uses Riemann integral instead of Lebesgue integral, the assumptions cannot be weakened.

Derivation for the integral form of the remainder

[edit]

Due to absolute continuity of f(k) on the closed interval between a and x its derivative f(k+1) exists as an L1-function, and we can use fundamental theorem of calculus and integration by parts. This same proof applies for the Riemann integral assuming that f(k) is continuous on the closed interval and differentiable on the open interval between a and x, and this leads to the same result than using the mean value theorem.

The fundamental theorem of calculus states that

Now we can integrate by parts and use the fundamental theorem of calculus again to see that

which is exactly Taylor's theorem with remainder in the integral form in the case k=1. The general statement is proved using induction. Suppose that

Integrating the remainder term by parts we arrive at

Substituting this into the formula in (*) shows that if it holds for the value k, it must also hold for the value k + 1. Therefore, since it holds for k = 1, it must hold for every positive integer k.

Derivation for the remainder of multivariate Taylor polynomials

[edit]

We prove the special case, where f : RnR has continuous partial derivatives up to the order k+1 in some closed ball B with center a. The strategy of the proof is to apply the one-variable case of Taylor's theorem to the restriction of f to the line segment adjoining x and a.[8] Parametrize the line segment between a and x by u(t) = a + t(xa). We apply the one-variable version of Taylor's theorem to the function g(t) = f(u(t)):

Applying the chain rule for several variables gives

where is the multinomial coefficient. Since , we get

See also

[edit]

Footnotes

[edit]
  1. ^ "Dirk Hünniger/play", Encyclopedia of Mathematics, EMS Press, 2001 [1994]
  2. ^ Klein 1998, §20.3; Apostol 1967, §7.7.
  3. ^ Apostol 1967, §7.7.
  4. ^ Apostol 1967, §7.5.
  5. ^ Apostol 1967, §7.6
  6. ^ Rudin, 1987, §10.26.
  7. ^ Stromberg 1981
  8. ^ Hörmander 1976, pp. 12–13

References

[edit]
[edit]

Category:Articles containing proofs Category:Mathematical series Category:Theorems in calculus Category:Theorems in real analysis