Jump to content

User:Drfg90/Bioapplications of Plasmonics/Test

From Wikipedia, the free encyclopedia

In physics, a plasmon is a quantum of plasma oscillation. The plasmon is a quasiparticle resulting from the quantization of plasma oscillations just as photons and phonons are quantizations of light and mechanical vibrations, respectively (though the photon is an elementary particle, not a quasiparticle). Thus, plasmons are collective oscillations of the free electron gas density, for example, at optical frequencies. Plasmons can couple with a photon to create another quasiparticle called a plasma polariton.

Since plasmons are the quantization of classical plasma oscillations, most of their properties can be derived directly from Maxwell's equations.

Explanation

[edit]

Plasmons can be described in the classical picture as an oscillation of free electron density with respect to the fixed positive ions in a metal. To visualize a plasma oscillation, imagine a cube of metal is placed in an external electric field pointing to the right. Electrons will move to the left side (uncovering positive ions on the right side) until they cancel the field inside the metal. Now we switch the electric field off, and the electrons move to the right, repelled by each other and attracted to the positive ions left bare on the right side. They oscillate back and forth at the plasma frequency until the energy is lost in some kind of resistance or damping. Plasmons are a quantization of this kind of oscillation.

Plasmons play a large role in the optical properties of metals. Light of frequency below the plasma frequency is reflected, because the electrons in the metal screen the electric field of the light. Light of frequency above the plasma frequency is transmitted, because the electrons cannot respond fast enough to screen it. In most metals, the plasma frequency is in the ultraviolet, making them shiny (reflective) in the visible range. Some metals, such as copper[1] and gold, have electronic interband transitions in the visible range, whereby specific light energies (colors) are absorbed, yielding their distinct color. In semiconductors, the valence electron plasma frequency is usually in the deep ultraviolet,[2][3] which is why they too are reflective.

The plasmon energy can often be estimated in the free electron model as

where is the conduction electron density, is the elementary charge, is the electron mass, the permittivity of free space, the Planck constant and the plasmon frequency.

Surface plasmons

[edit]

Surface plasmons are those plasmons that are confined to surfaces and that interact strongly with light resulting in a polariton. They occur at the interface of a vacuum or material with a positive dielectric constant, and a negative dielectric constant (usually a metal or doped dielectric). They play a role in Surface Enhanced Raman Spectroscopy and in explaining anomalies in diffraction from metal gratings (Wood's anomaly), among other things. Surface plasmon resonance is used by biochemists to study the mechanisms and kinetics of ligands binding to receptors (i.e. a substrate binding to an enzyme).

Gothic stained glass rose window of Notre-Dame de Paris. The colors were achieved by colloids of gold nano-particles.

More recently surface plasmons have been used to control colors of materials.[4] This is possible since controlling the particle's shape and size determines the types of surface plasmons that can couple to it and propagate across it. This in turn controls the interaction of light with the surface. These effects are illustrated by the historic stained glass which adorn medieval cathedrals. In this case, the color is given by metal nanoparticles of a fixed size which interact with the optical field to give the glass its vibrant color. In modern science, these effects have been engineered for both visible light and microwave radiation. Much research goes on first in the microwave range because at this wavelength material surfaces can be produced mechanically as the patterns tend to be of the order a few centimeters. To produce optical range surface plasmon effects involves producing surfaces which have features <400 nm. This is much more difficult and has only recently become possible to do in any reliable or available way.

Possible applications

[edit]

Position and intensity of plasmon absorption and emission peaks are affected by molecular adsorption, which can be used in molecular sensors. For example, a fully operational prototype device detecting casein in milk has been fabricated. The device is based on detecting a change in absorption of a gold layer.[5] Localized surface plasmons of metal nanoparticles can be used for sensing different types molecules, proteins, etc.

Plasmons are being considered as a means of transmitting information on computer chips, since plasmons can support much higher frequencies (into the 100 THz range, while conventional wires become very lossy in the tens of GHz). For plasmon-based electronics to be useful, the analog to the transistor, called a plasmonster, was invented.[6]

Plasmons have also been proposed as a means of high-resolution lithography and microscopy due to their extremely small wavelengths. Both of these applications have seen successful demonstrations in the lab environment. Finally, surface plasmons have the unique capacity to confine light to very small dimensions which could enable many new applications.

Surface plasmons are very sensitive to the properties of the materials on which they propagate. This has led to their use to measure the thickness of monolayers on colloid films, such as screening and quantifying protein binding events. Companies such as Biacore have commercialized instruments which operate on these principles. Optical surface plasmons are being investigated with a view to improve makeup by L'Oréal among others.[7]

In 2009, a Korean research team found a way to greatly improve organic light-emitting diode efficiency with the use of plasmons.[8]

A group of European researchers led by IMEC has begun work to improve solar cell efficiencies and costs through incorporation of metallic nanostructures (using plasmonic effects) that can enhance absorption of light into different types of solar cells: crystalline silicon (c-Si), high-performance III-V, organic, and dye-sensitized solar cells. [9]

See also

[edit]

References

[edit]
  1. ^ Burdick, Glenn (1963). "Energy Band Structure of Copper". Physical Review. 129: 138. Bibcode:1963PhRv..129..138B. doi:10.1103/PhysRev.129.138.
  2. ^ Kittel, C. (2005). Introduction to Solid State Physics (8th ed.). John Wiley & Sons. p. 403, table 2.
  3. ^ Böer, K. W. (2002). Survey of Semiconductor Physics. Vol. 1 (2nd ed.). John Wiley & Sons. p. 525.
  4. ^ "LEDs work like butterflies' wings". BBC News. November 18, 2005. Retrieved May 22, 2010.
  5. ^ Heip, H. M. (2007). "A localized surface plasmon resonance based immunosensor for the detection of casein in milk". Science and Technology of Advanced Materials. 8 (4): 331. Bibcode:2007STAdM...8..331M. doi:10.1016/j.stam.2006.12.010. {{cite journal}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)
  6. ^ Lewotsky, Kristin (2007). "The Promise of Plasmonics". SPIE Professional. doi:10.1117/2.4200707.07.
  7. ^ "The L'Oréal Art & Science of Color Prize – 7th Prize Winners".
  8. ^ "Prof. Choi Unveils Method to Improve Emission Efficiency of OLED". KAIST. 9 July 2009.
  9. ^ "EU partners eye metallic nanostructures for solar cells". ElectroIQ. 30 March 2010.
[edit]

Category:Plasma physics Category:Quasiparticles