Jump to content

Waxwing (rocket motor)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by GreenC bot (talk | contribs) at 04:19, 22 April 2022 (Rescued 1 archive link. Wayback Medic 2.5). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Black Arrow satellite deployment, with Waxwing upper stage.
Waxwing seen without its engine nozzle

Waxwing was a British solid rocket motor used for apogee kick as the 3rd (upper) stage of the Black Arrow satellite launch vehicles. Waxwing was used to successfully place the Prospero X-3 satellite into low Earth orbit on 28 October 1971, Britain's only satellite launch on an indigenously developed launch vehicle.

Another use of Waxwing was to increase the velocity of test re-entry vehicles on Black Knight during tests for the Blue Streak missile.[1]

Design and development

Design was by the Rocket Propulsion Establishment (RPE) at Westcott and it was manufactured by Bristol Aerojet.[2] The casing was spherical and the propellant grain used an internal star profile to control the initial burn rate.

Specifications

  • Thrust: 29.4 kN[3][4]
  • Specific impulse: 2700 m/s (278 s)[3]
  • Burn time: 28 s
    40 seconds[4][contradictory]
  • Weight:[3]
    • Gross mass: 397 kg (875 lb)
    • Unfuelled mass: 87 kg (192 lb)
  • Dimensions:[5]
    • Diameter: 28 in (0.71 m)
    • Overall length: 52 in (1.3 m)
    • Nozzle length: 22 in (0.56 m)
    • Nozzle diameter: 18 in (0.46 m)

References

  1. ^ "Waxwing rocket motor".
  2. ^ "Point of the Arrow" FLIGHT International, 11 November 1971
  3. ^ a b c "Black Arrow-3". astronautix.com. Archived from the original on 28 December 2016.
  4. ^ a b Black Arrow exhibit, Science Museum, London
  5. ^ "Waxwing dimensional drawing". Space UK. Archived from the original on 6 November 2004.{{cite web}}: CS1 maint: unfit URL (link)