Fourier transform

In mathematics, the Fourier transform (often abbreviated FT) is an operation that transforms one complex-valued function of a real variable into another. In such applications as signal processing, the domain of the original function is typically time and is accordingly called the time domain. That of the new function is frequency, and so the Fourier transform is often called the frequency domain representation of the original function. It describes which frequencies are present in the original function.

For example, a note played on a flute is reasonably pure: a single frequency with only minor overtones, which are additional, related frequencies. It may be envisaged as a simple repeating wave; a sine wave, because of the relative absence of such overtones. But the same note played on, say, an oboe or guitar would have a somewhat shriller sound, caused by a higher level of overtones. It would appear visually more complex, because of the significant presence of such overtones. In this example, a Fourier transform is the representation of the frequencies (and their amplitudes) present in that note of that instrument. For the flute note it would be approximately a single vertical line at the single frequency; for the oboe note there would be additional, smaller (lower amplitude) vertical lines representing the overtones.

The term Fourier transform refers both to the frequency domain representation of a function and to the process or formula that "transforms" one function into the other.

The Fourier transform and its generalizations are the subject of Fourier analysis. In this specific case, both the time and frequency domains are unbounded linear continua. It is possible to define the Fourier transform of a function of several variables, which is important for instance in the physical study of wave motion and optics. It is also possible to generalize the Fourier transform on discrete structures such as finite groups, efficient computation of which through a fast Fourier transform is essential for high-speed computing.

Definition

There are several common conventions for defining the Fourier transform of an integrable function ƒ : R → C (Kaiser 1994). This article will use the definition:

${\hat {f}}(\xi ):=\int _{-\infty }^{\infty }f(x)\ e^{-2\pi ix\xi }\,dx,$   for every real number ξ.

When the independent variable x represents time (with SI unit of seconds), the transform variable ξ  represents ordinary frequency (in hertz). Under suitable conditions, ƒ can be reconstructed from ${\hat {f}}$ by the inverse transform:

$f(x)=\int _{-\infty }^{\infty }{\hat {f}}(\xi )\ e^{2\pi ix\xi }\,d\xi ,$   for every real number x.

For other common conventions and notations see the sections Other conventions and Other notations below. The Fourier transform on Euclidean space is treated separately, in which the variable x often represents position and ξ momentum.

Introduction

See also: Fourier analysis

The motivation for the Fourier transform comes from the study of Fourier series. In the study of Fourier series, complicated periodic functions are written as the sum of simple waves mathematically represented by sines and cosines. Due to the properties of sine and cosine it is possible to recover the amount of each wave in the sum by an integral. In many cases it is desirable to use Euler's formula, which states that e^2πiθ = cos 2πθ + i sin 2πθ, to write Fourier series in terms of the basic waves e^2πiθ. This has the advantage of simplifying many of the formulas involved and providing a formulation for Fourier series that more closely resembles the definition followed in this article. This passage from sines and cosines to complex exponentials makes it necessary for the Fourier coefficients to be complex valued. The usual interpretation of this complex number is that it gives you both the amplitude (or size) of the wave present in the function and the phase (or the initial angle) of the wave. This passage also introduces the need for negative "frequencies". If θ were measured in seconds then the waves e^2πiθ and e^−2πiθ would both complete one cycle per second, but they represent different frequencies in the Fourier transform. Hence, frequency no longer measures the number of cycles per unit time, but is closely related.

We may use Fourier series to motivate the Fourier transform as follows. Suppose that ƒ is a function which is zero outside of some interval [−L/2, L/2]. Then for any T ≥ L we may expand ƒ in a Fourier series on the interval [−T/2,T/2], where the "amount" (denoted by c_n) of the wave e^2πinx/T in the Fourier series of ƒ is given by

${\hat {f}}(n/T)=c_{n}=\int _{-T/2}^{T/2}e^{-2\pi inx/T}f(x)\,dx$

and ƒ should be given by the formula

$f(x)={\frac {1}{T}}\sum _{n=-\infty }^{\infty }{\hat {f}}(n/T)e^{2\pi inx/T}.$

If we let ξ_n = n/T, and we let Δξ = (n + 1)/T − n/T = 1/T, then this last sum becomes the Riemann sum

$f(x)=\sum _{n=-\infty }^{\infty }{\hat {f}}(n/T)e^{2\pi ix\xi _{n}}\Delta \xi .$

By letting T → ∞ this Riemann sum converges to the integral for the inverse Fourier transform given in the Definition section. Under suitable conditions this argument may be made precise (Stein & Shakarchi 2003). Hence, as in the case of Fourier series, the Fourier transform can be thought of as a function that measures how much of each individual frequency is present in our function, and we can recombine these waves by using an integral (or "continuous sum") to reproduce the original function.

The following images provide a visual illustration of how the Fourier transform measures whether a frequency is present in a particular function. The function depicted $f(t)=\cos(6\pi t)e^{-\pi t^{2}}$ oscillates at 3 hertz (if t measures seconds) and tends quickly to 0. This function was specially chosen to have a real Fourier transform which can easily be plotted. The first image contains its graph. In order to calculate ${\hat {f}}(3)$ we must integrate e^−2πi(3t)ƒ(t). The second image shows the plot of the real and imaginary parts of this function. The real part of the integrand is almost always positive, this is because when ƒ(t) is negative, then the real part of e^−2πi(3t) is negative as well. Because they oscillate at the same rate, when ƒ(t) is positive, so is the real part of e^−2πi(3t). The result is that when you integrate the real part of the integrand you get a relatively large number (in this case 0.5). On the other hand, when you try to measure a frequency that is not present, as in the case when we look at ${\hat {f}}(5)$, the integrand oscillates enough so that the integral is very small. The general situation may be a bit more complicated than this, but this in spirit is how the Fourier transform measures how much of an individual frequency is present in a function ƒ(t).

• 
  Original function showing oscillation 3 hertz.
• 
  Real and imaginary parts of integrand for Fourier transform at 3 hertz
• 
  Real and imaginary parts of integrand for Fourier transform at 5 hertz
• 
  Fourier transform with 3 and 5 hertz labeled.

Properties of the Fourier transform

An integrable function is a function ƒ on the real line that is Lebesgue-measurable and satisfies

$\int _{-\infty }^{\infty }|f(x)|\,dx<\infty .$

Basic properties

Given integrable functions f(x), g(x), and h(x) denote their Fourier transforms by ${\hat {f}}(\xi )$, ${\hat {g}}(\xi )$, and ${\hat {h}}(\xi )$ respectively. The Fourier transform has the following basic properties (Pinsky 2002).

Linearity

For any complex numbers a and b, if h(x) = aƒ(x) + bg(x), then  ${\hat {h}}(\xi )=a\cdot {\hat {f}}(\xi )+b\cdot {\hat {g}}(\xi ).$

Translation

For any real number x₀, if h(x) = ƒ(x − x₀), then  ${\hat {h}}(\xi )=e^{-2\pi ix_{0}\xi }{\hat {f}}(\xi ).$

Modulation

For any real number ξ₀, if h(x) = e^2πixξ₀ƒ(x), then  ${\hat {h}}(\xi )={\hat {f}}(\xi -\xi _{0})$.

Scaling

For all non-zero real numbers a, if h(x) = ƒ(ax), then  ${\hat {h}}(\xi )={\frac {1}{|a|}}{\hat {f}}\left({\frac {\xi }{a}}\right)$.     The case a = −1 leads to the time-reversal property, which states: if h(x) = ƒ(−x), then  ${\hat {h}}(\xi )={\hat {f}}(-\xi )$.

Conjugation

If $h(x)={\overline {f(x)}}$, then  ${\hat {h}}(\xi )={\overline {{\hat {f}}(-\xi )}}.$

In particular, if ƒ is real, then one has the reality condition  ${\hat {f}}(-\xi )={\overline {{\hat {f}}(\xi )}}.$

Convolution

If $h(x)=\left(f*g\right)(x)$, then  ${\hat {h}}(\xi )={\hat {f}}(\xi )\cdot {\hat {g}}(\xi ).$

Uniform continuity and the Riemann-Lebesgue lemma

The rectangular function is Lebesgue integrable.

The sinc function, the Fourier transform of the rectangular function, is bounded and continuous, but not Lebesgue integrable.

The Fourier transform of integrable functions have additional properties that do not always hold. The Fourier transform of integrable functions ƒ are uniformly continuous and $\|{\hat {f}}\|_{\infty }\leq \|f\|_{1}$ (Katznelson 1976). The Fourier transform of integrable functions also satisfy the Riemann-Lebesgue lemma which states that (Stein & Weiss 1971)

${\hat {f}}(\xi )\to 0{\text{ as }}|\xi |\to \infty .\,$

The Fourier transform ${\hat {f}}$ of an integrable function ƒ is bounded and continuous, but need not be integrable – for example, the Fourier transform of the rectangular function, which is a step function (and hence integrable) is the sinc function, which is not Lebesgue integrable, though it does have an improper integral: one has an analog to the alternating harmonic series, which is a convergent sum but not absolutely convergent.

It is not possible in general to write the inverse transform as a Lebesgue integral. However, when both ƒ and ${\hat {f}}$ are integrable, the following inverse equality holds true for almost every x:

$f(x)=\int _{-\infty }^{\infty }{\hat {f}}(\xi )e^{2i\pi x\xi }\,d\xi .$

Almost everywhere, ƒ is equal to the continuous function given by the right-hand side. If ƒ is given as continuous function on the line, then equality holds for every x.

A consequence of the preceding result is that the Fourier transform is injective on L¹(R).

The Plancherel theorem and Parseval's theorem

Let f(x) and g(x) be integrable, and let ${\hat {f}}(\xi )$ and ${\hat {g}}(\xi )$ be their Fourier transforms. If f(x) and g(x) are also square-integrable, then we have Parseval's theorem (Rudin 1987, p. 187):

$\int _{-\infty }^{\infty }f(x){\overline {g(x)}}\,dx=\int _{-\infty }^{\infty }{\hat {f}}(\xi ){\overline {{\hat {g}}(\xi )}}\,d\xi ,$

where the bar denotes complex conjugation.

The Plancherel theorem, which is equivalent to Parseval's theorem, states (Rudin 1987, p. 186):

$\int _{-\infty }^{\infty }\left|f(x)\right|^{2}\,dx=\int _{-\infty }^{\infty }\left|{\hat {f}}(\xi )\right|^{2}\,d\xi .$

The Plancherel theorem makes it possible to define the Fourier transform for functions in L²(R), as described in Generalizations below. The Plancherel theorem has the interpretation in the sciences that the Fourier transform preserves the energy of the original quantity. It should be noted that depending on the author either of these theorems might be referred to as the Plancherel theorem or as Parseval's theorem.

See Pontryagin duality for a general formulation of this concept in the context of locally compact abelian groups.

Poisson summation formula

Main article: Poisson summation formula

The Poisson summation formula provides a link between the study of Fourier transforms and Fourier Series. Given an integrable function ƒ we can consider the periodization of ƒ given by:

${\bar {f}}(x)=\sum _{k\in \mathbb {Z} }f(x+k),$

where the summation is taken over the set of all integers k. The Poisson summation formula relates the Fourier series of ${\bar {f}}$ to the Fourier transform of ƒ. Specifically it states that the Fourier series of ${\bar {f}}$ is given by:

${\bar {f}}(x)\sim \sum _{k\in \mathbb {Z} }{\hat {f}}(k)e^{2\pi ikx}.$

Convolution theorem

Main article: Convolution theorem

The Fourier transform translates between convolution and multiplication of functions. If ƒ(x) and g(x) are integrable functions with Fourier transforms ${\hat {f}}(\xi )$ and ${\hat {g}}(\xi )$ respectively, then the Fourier transform of the convolution is given by the product of the Fourier transforms ${\hat {f}}(\xi )$ and ${\hat {g}}(\xi )$ (under other conventions for the definition of the Fourier transform a constant factor may appear).

This means that if:

$h(x)=(f*g)(x)=\int _{-\infty }^{\infty }f(y)g(x-y)\,dy,$

where ∗ denotes the convolution operation, then:

${\hat {h}}(\xi )={\hat {f}}(\xi )\cdot {\hat {g}}(\xi ).$

In linear time invariant (LTI) system theory, it is common to interpret g(x) as the impulse response of an LTI system with input ƒ(x) and output h(x), since substituting the unit impulse for ƒ(x) yields h(x) = g(x). In this case,  ${\hat {g}}(\xi )$  represents the frequency response of the system.

Conversely, if ƒ(x) can be decomposed as the product of two square integrable functions p(x) and q(x), then the Fourier transform of ƒ(x) is given by the convolution of the respective Fourier transforms ${\hat {p}}(\xi )$ and ${\hat {q}}(\xi )$.

Cross-correlation theorem

Main article: Cross-correlation

In an analogous manner, it can be shown that if h(x) is the cross-correlation of ƒ(x) and g(x):

$h(x)=(f\star g)(x)=\int _{-\infty }^{\infty }{\overline {f(y)}}\,g(x+y)\,dy$

then the Fourier transform of h(x) is:

${\hat {h}}(\xi )={\overline {{\hat {f}}(\xi )}}\,{\hat {g}}(\xi ).$

Eigenfunctions

One important choice of an orthonormal basis for L²(R) is given by the Hermite functions

${\psi }_{n}(x)={\frac {2^{1/4}}{\sqrt {n!}}}\,e^{-\pi x^{2}}H_{n}(2x{\sqrt {\pi }}),$

where $H_{n}(x)$ are the "probabilist's" Hermite polynomials, defined by H_n(x) = (−1)ⁿexp(x²/2) Dⁿ exp(−x²/2). Under this convention for the Fourier transform, we have that

${\hat {\psi }}_{n}(\xi )=(-i)^{n}{\psi }_{n}(\xi ).$

In other words, the Hermite functions form a complete orthonormal system of eigenfunctions for the Fourier transform on L²(R) (Pinsky 2002). However, this choice of eigenfunctions is not unique. There are only four different eigenvalues of the Fourier transform (±1 and ±i) and any linear combination of eigenfunctions with the same eigenvalue gives another eigenfunction. As a consequence of this, it is possible to decompose L²(R) as a direct sum of four spaces H₀, H₁, H₂, and H₃ where the Fourier transform acts on H_k simply by multiplication by i^k. This approach to define the Fourier transform is due to N. Wiener (Duoandikoetxea 2001). The choice of Hermite functions is convenient because they are exponentially localized in both frequency and time domains, and thus give rise to the fractional Fourier transform used in time-frequency analysis .

Fourier transform on Euclidean space

The Fourier transform can be in any arbitrary number of dimensions n. As with the one-dimensional case there are many conventions, for an integrable function ƒ(x) this article takes the definition:

${\hat {f}}(\xi )={\mathcal {F}}(f)(\xi )=\int _{\mathbb {R} ^{n}}f(x)e^{-2\pi ix\cdot \xi }\,dx$

where x and ξ are n-dimensional vectors, and x · ξ is the dot product of the vectors. The dot product is sometimes written as $\left\langle x,\xi \right\rangle$.

All of the basic properties listed above hold for the n-dimensional Fourier transform, as do Plancherel's and Parseval's theorem. When the function is integrable, the Fourier transform is still uniformly continuous and the Riemann-Lebesgue lemma holds. (Stein & Weiss 1971)

Uncertainty principle

Generally speaking, the more concentrated f(x) is, the more spread out its Fourier transform ${\hat {f}}(\xi )$  must be. In particular, the scaling property of the Fourier transform may be seen as saying: if we "squeeze" a function in x, its Fourier transform "stretches out" in ξ. It is not possible to arbitrarily concentrate both a function and its Fourier transform.

The trade-off between the compaction of a function and its Fourier transform can be formalized in the form of an Uncertainty Principle, and is formalized by viewing a function and its Fourier transform as conjugate variables with respect to the symplectic form on the time–frequency domain: from the point of view of the linear canonical transformation, the Fourier transform is rotation by 90° in the time–frequency domain, and preserves the symplectic form.

Suppose ƒ(x) is an integrable and square-integrable function. Without loss of generality, assume that ƒ(x) is normalized:

$\int _{-\infty }^{\infty }|f(x)|^{2}\,dx=1.$

It follows from the Plancherel theorem that ${\hat {f}}(\xi )$  is also normalized.

The spread around x = 0 may be measured by the dispersion about zero (Pinsky 2002) defined by

$D_{0}(f)=\int _{-\infty }^{\infty }x^{2}|f(x)|^{2}\,dx.$

In probability terms, this is the second moment of $|f(x)|^{2}\,\!$ about zero.

The Uncertainty principle states that, if ƒ(x) is absolutely continuous and the functions x·ƒ(x) and ƒ′(x) are square integrable, then

$D_{0}(f)D_{0}({\hat {f}})\geq {\frac {1}{16\pi ^{2}}}$    (Pinsky 2002).

The equality is attained only in the case $f(x)=C_{1}\,e^{{-\pi x^{2}}/{\sigma ^{2}}}$    (hence   $\quad {\hat {f}}(\xi )=\sigma C_{1}\,e^{-\pi \sigma ^{2}\xi ^{2}}$  )  where σ > 0 is arbitrary and C₁ is such that ƒ is L²–normalized (Pinsky 2002). In other words, where ƒ is a (normalized) Gaussian function, centered at zero.

In fact, this inequality implies that:

$\left(\int _{-\infty }^{\infty }(x-x_{0})^{2}|f(x)|^{2}\,dx\right)\left(\int _{-\infty }^{\infty }(\xi -\xi _{0})^{2}|{\hat {f}}(\xi )|^{2}\,d\xi \right)\geq {\frac {1}{16\pi ^{2}}}$

for any $x_{0},\,\xi _{0}$  in R  (Stein & Shakarchi 2003).

In quantum mechanics, the momentum and position wave functions are Fourier transform pairs, to within a factor of Planck's constant. With this constant properly taken into account, the inequality above becomes the statement of the Heisenberg uncertainty principle (Stein & Shakarchi 2003).

Spherical harmonics

Let the set of homogeneous harmonic polynomials of degree k on Rⁿ be denoted by A_k. The set A_k consists of the solid spherical harmonics of degree k. The solid spherical harmonics play a similar role in higher dimensions to the Hermite polynomials in dimension one. Specifically, if f(x) = e^−π|x|2P(x) for some P(x) in A_k, then ${\hat {f}}(\xi )=i^{-k}f(\xi )$. Let the set H_k be the closure in L²(Rⁿ) of linear combinations of functions of the form f(|x|)P(x) where P(x) is in A_k. The space L²(Rⁿ) is then a direct sum of the spaces H_k and the Fourier transform maps each space H_k to itself and is possible to characterize the action of the Fourier transform on each space H_k (Stein & Weiss 1971). Let ƒ(x) = ƒ₀(|x|)P(x) (with P(x) in A_k), then ${\hat {f}}(\xi )=F_{0}(|\xi |)P(\xi )$ where

$F_{0}(r)=2\pi i^{-k}r^{-(n+2k-2)/2}\int _{0}^{\infty }f_{0}(s)J_{(n+2k-2)/2}(2\pi rs)s^{(n+2k)/2}\,ds.$

Here J_{(n + 2k − 2)/2} denotes the Bessel function of the first kind with order (n + 2k − 2)/2. When k = 0 this gives a useful formula for the Fourier transform of a radial function (Grafakos 2004).

Restriction problems

In higher dimensions it becomes interesting to study restriction problems for the Fourier transform. The Fourier transform of an integrable function is continuous and the restriction of this function to any set is defined. But for a square-integrable function the Fourier transform could be a general class of square integrable functions. As such, the restriction of the Fourier transform of an L²(Rⁿ) function cannot be defined on sets of measure 0. It is still an active area of study to understand restriction problems in L^p for 1 < p < 2. Surprisingly, it is possible in some cases to define the restriction of a Fourier transform to a set S, provided S has non-zero curvature. The case when S is the unit sphere in Rⁿ is of particular interest. In this case the Tomas-Stein restriction theorem states that the restriction of the Fourier transform to the unit sphere in Rⁿ is a bounded operator on L^p provided 1 ≤ p ≤ (2n + 2) / (n + 3).

One notable difference between the Fourier transform in 1 dimension versus higher dimensions concerns the partial sum operator. Consider an increasing collection of measurable sets E_R indexed by R ∈ (0,∞): such as balls of radius R centered at the origin, or cubes of side 2R. For a given integrable function ƒ, consider the function ƒ_R defined by:

$f_{R}(x)=\int _{E_{R}}{\hat {f}}(\xi )e^{2\pi ix\cdot \xi }\,d\xi ,\quad x\in \mathbb {R} ^{n}.$

Suppose in addition that ƒ is in L^p(Rⁿ). For n = 1 and 1 < p < ∞, if one takes E_R = (−R, R), then ƒ_R converges to ƒ in L^p as R tends to infinity, by the boundedness of the Hilbert transform. Naively one may hope the same holds true for n > 1. In the case that E_R is taken to be a cube with side length R, then convergence still holds. Another natural candidate is the Euclidean ball E_R = {ξ : |ξ| < R}. In order for this partial sum operator to converge, it is necessary that the multiplier for the unit ball be bounded in L^p(Rⁿ). For n ≥ 2 it is a celebrated theorem of Charles Fefferman that the multiplier for the unit ball is never bounded unless p = 2 (Duoandikoetxea 2001). In fact, when p ≠ 2, this shows that not only may ƒ_R fail to converge to ƒ in L^p, but for some functions ƒ ∈ L^p(Rⁿ), ƒ_R is not even an element of L^p.

Generalizations

Fourier transform on other function spaces

It is possible to extend the definition of the Fourier transform to other spaces of functions. Since compactly supported smooth functions are integrable and dense in L²(R), the Plancherel theorem allows us to extend the definition of the Fourier transform to general functions in L²(R) by continuity arguments. Further ${\mathcal {F}}$: L²(R) → L²(R) is a unitary operator (Stein & Weiss 1971, Thm. 2.3). Many of the properties remain the same for the Fourier transform. The Hausdorff-Young inequality can be used to extend the definition of the Fourier transform to include functions in L^p(R) for 1 ≤ p ≤ 2. Unfortunately, further extensions become more technical. The Fourier transform of functions in L^p for the range 2 < p < ∞ requires the study of distributions (Katznelson 1976). In fact, it can be shown that there are functions in L^p with p>2 so that the Fourier transform is not defined as a function (Stein & Weiss 1971).

Fourier–Stieltjes transform

The Fourier transform of a finite Borel measure μ on Rⁿ is given by (Pinsky 2002):

${\hat {\mu }}(\xi )=\int _{\mathbb {R} ^{n}}\mathrm {e} ^{-2\pi ix\cdot \xi }\,d\mu .$

This transform continues to enjoy many of the properties of the Fourier transform of integrable functions. One notable difference is that the Riemann–Lebesgue lemma fails for measures (Katznelson 1976). In the case that dμ = ƒ(x) dx, then the formula above reduces to the usual definition for the Fourier transform of ƒ. In the case that μ is the probability distribution associated to a random variable X, the Fourier-Stieltjes transform is closely related to the characteristic function, but the typical conventions in probability theory take e^ix·ξ instead of e^−2πix·ξ (Pinsky 2002). In the case when the distribution has a probability density function this definition reduces to the Fourier transform applied to the probability density function, again with a different choice of constants.

The Fourier transform may be used to give a characterization of continuous measures. Bochner's theorem characterizes which functions may arise as the Fourier–Stieltjes transform of a measure (Katznelson 1976).

Furthermore, the Dirac delta function is not a function but it is a finite Borel measure. Its Fourier transform is a constant function (whose specific value depends upon the form of the Fourier transform used).

Tempered distributions

Main article: Tempered distributions

The Fourier transform maps the space of Schwartz functions to itself, and gives a homeomorphism of the space to itself (Stein & Weiss 1971). Because of this it is possible to define the Fourier transform of tempered distributions. These include all the integrable functions mentioned above and have the added advantage that the Fourier transform of any tempered distribution is again a tempered distribution.

The following two facts provide some motivation for the definition of the Fourier transform of a distribution. First let ƒ and g be integrable functions, and let ${\hat {f}}$ and ${\hat {g}}$ be their Fourier transforms respectively. Then the Fourier transform obeys the following multiplication formula (Stein & Weiss 1971),

$\int _{\mathbb {R} ^{n}}{\hat {f}}(x)g(x)\,dx=\int _{\mathbb {R} ^{n}}f(x){\hat {g}}(x)\,dx.$

Secondly, every integrable function ƒ defines a distribution T_ƒ by the relation

$T_{f}(\varphi )=\int _{\mathbb {R} ^{n}}f(x)\varphi (x)\,dx$   for all Schwartz functions φ.

In fact, given a distribution T, we define the Fourier transform by the relation

${\hat {T}}(\varphi )=T({\hat {\varphi }})$   for all Schwartz functions φ.

It follows that ${\hat {T}}_{f}=T_{\hat {f}}$.

Distributions can be differentiated and the above mentioned compatibility of the Fourier transform with differentiation and convolution remains true for tempered distributions.

Locally compact abelian groups

Main article: Pontryagin duality

The Fourier transform may be generalized to any locally compact abelian group. A locally compact abelian group is an abelian group which is at the same time a locally compact Hausdorff topological space so that the group operations are continuous. If G is a locally compact abelian group, it has a translation invariant measure μ, called Haar measure. For a locally compact abelian group G it is possible to place a topology on the set of characters ${\hat {G}}$ so that ${\hat {G}}$ is also a locally compact abelian group. For a function ƒ in L¹(G) it is possible to define the Fourier transform by (Katznelson 1976):

${\hat {f}}(\xi )=\int _{G}\xi (x)f(x)\,d\mu \qquad {\text{for any }}\xi \in {\hat {G}}.$

Locally compact Hausdorff space

Main article: Gelfand representation

The Fourier transform may be generalized to any locally compact Hausdorff space, which recovers the topology but loses the group structure.

Given a locally compact Hausdorff topological space X, the space A=C₀(X) of continuous complex-valued functions on X which vanish at infinity is in a natural way a commutative C*-algebra, via pointwise addition, multiplication, complex conjugation, and with norm as the uniform norm. Conversely, the characters of this algebra A, denoted $\Phi _{A},$ are naturally a topological space, and can be identified with evaluation at a point of x, and one has an isometric isomorphism $C_{0}(X)\to C_{0}(\Phi _{A}).$ In the case where X=R is the real line, this is exactly the Fourier transform.

Non-abelian groups

Main article: Non-commutative harmonic analysis

The Fourier transform can also be defined for functions on a non-abelian group, provided that the group is compact. Unlike the Fourier transform on an abelian group, which is scalar-valued, the Fourier transform on a non-abelian group is operator-valued (Hewitt & Ross 1971, Chapter 8). The Fourier transform on compact groups is a major tool in representation theory (Knapp 2001) and non-commutative harmonic analysis.

Let G be a compact Hausdorff topological group. Let Σ denote the collection of all isomorphism classes of finite-dimensional irreducible unitary representations, along with a definite choice of representation U^(σ) on the Hilbert space H_σ of finite dimension d_σ for each σ ∈ Σ. If μ is a finite Borel measure on G, then the Fourier–Stieltjes transform of μ is the operator on H_σ defined by

$\langle {\hat {\mu }}\xi ,\eta \rangle _{H_{\sigma }}=\int _{G}\langle {\overline {U}}_{g}^{(\sigma )}\xi ,\eta \rangle \,d\mu (g)$

where $\scriptstyle {{\overline {U}}^{(\sigma )}}$ is the complex-conjugate representation of U^(σ) acting on H_σ. As in the abelian case, if μ is absolutely continuous with respect to the left-invariant probability measure λ on G, then it is represented as

$d\mu =fd\lambda$

for some ƒ ∈ L¹(λ). In this case, one identifies the Fourier transform of ƒ with the Fourier–Stieltjes transform of μ.

The mapping $\mu \mapsto {\hat {\mu }}$ defines an isomorphism between the Banach space M(G) of finite Borel measures (see rca space) and a closed subspace of the Banach space C_∞(Σ) consisting of all sequences E = (E_σ) indexed by Σ of (bounded) linear operators E_σ : H_σ → H_σ for which the norm

$\|E\|=\sup _{\sigma \in \Sigma }\|E_{\sigma }\|$

is finite. The "convolution theorem" asserts that, furthermore, this isomorphism of Banach spaces is in fact an isomorphism of C^* algebras into a subspace of C_∞(Σ), in which M(G) is equipped with the product given by convolution of measures and C_∞(Σ) the product given by multiplication of operators in each index σ.

The Peter-Weyl theorem holds, and a version of the Fourier inversion formula (Plancherel's theorem) follows: if ƒ ∈ L²(G), then

$f(g)=\sum _{\sigma \in \Sigma }d_{\sigma }\operatorname {tr} ({\hat {f}}(\sigma )U_{g}^{(\sigma )})$

where the summation is understood as convergent in the L² sense.

The generalization of the Fourier transform to the noncommutative situation has also in part contributed to the development of noncommutative geometry. In this context, a categorical generalization of the Fourier transform to noncommutative groups is Tannaka-Krein duality, which replaces the group of characters with the category of representations. However, this loses the connection with harmonic functions.

Alternatives

In signal processing terms, a function (of time) is a representation of a signal with perfect time resolution, but no frequency information, while the Fourier transform has perfect frequency resolution, but no time information: the magnitude of the Fourier transform at a point is how much frequency content there is, but location is only given by phase (argument of the Fourier transform at a point), and standing waves are not localized in time – a sine wave continues out to infinity, without decaying. This limits the usefulness of the Fourier transform for analyzing signals that are localized in time, notably transients, or any signal of finite extent.

As alternatives to the Fourier transform, in time-frequency analysis, one uses time-frequency transforms to represent signals in a form that has some time information and some frequency information – by the uncertainty principle, there is a trade-off between these. These can be generalizations of the Fourier transform, such as the short-time Fourier transform or fractional Fourier transform, or can use different functions to represent signals, as in wavelet transforms and chirplet transforms, with the wavelet analog of the (continuous) Fourier transform being the continuous wavelet transform.

Applications

Analysis of differential equations

Fourier transforms, and the closely related Laplace transforms are widely used in solving differential equations. The Fourier transform is compatible with differentiation in the following sense: if f(x) is a differentiable function with Fourier transform ${\hat {f}}(\xi )$, then the Fourier transform of its derivative is given by $2\pi i\xi {\hat {f}}(\xi )$. This can be used to transform differential equations into algebraic equations. Note that this technique only applies to problems whose domain is the whole set of real numbers. By extending the Fourier transform to functions of several variables partial differential equations with domain Rⁿ can also be translated into algebraic equations.

NMR and MR Imaging experiments

Fourier transforms, are also related to the acquisition of a signal in Nuclear Magnetic resonance. Upon acquiring the FID (Free Inductive Decay) an exponential FID signal in the time domain is Fourier transformed to produce a Lorentzian signal in the frequency domain. Furthermore Fourier transforms are also used in MRI experiments where the K-space (the reciprocal space vector) is encoded in the x and y direction, in which the spatial information in the K-space is frequency and phase encoded, respectively. This spatial information which produces an FID from the spinning nuclei is then Fourier transformed to form an image in real space.

Domain and range of the Fourier transform

It is often desirable to have the most general domain for the Fourier transform as possible. The definition of Fourier transform as an integral naturally restricts the domain to the space of integrable functions. Unfortunately, there is no simple characterizations of which functions are Fourier transforms of integrable functions (Stein & Weiss 1971). It is possible to extend the domain of the Fourier transform in various ways, as discussed in generalizations above. The following list details some of the more common domains and ranges on which the Fourier transform is defined.

• The space of Schwartz functions is closed under the Fourier transform. Schwartz functions are rapidly decaying functions and do not include all functions which are relevant for the Fourier transform. More details may be found in (Stein & Weiss 1971).

• The space L^p maps into the space L^q, where 1/p + 1/q = 1 and 1 ≤ p ≤ 2 (Hausdorff–Young inequality).

• In particular, the space L² is closed under the Fourier transform, but here the Fourier transform is no longer defined by integration.

• The space L¹ of Lebesgue integrable functions maps into C₀, the space of continuous functions that tend to zero at infinity – not just into the space $L^{\infty }$ of bounded functions (the Riemann–Lebesgue lemma).

• The set of tempered distributions is closed under the Fourier transform. Tempered distributions are also a form of generalization of functions. It is in this generality that one can define the Fourier transform of objects like the Dirac comb.

Other notations

Other common notations for ${\hat {f}}(\xi )$ are: ${\mathcal {F}}(\xi )$, ${\mathcal {F}}\left(f\right)(\xi )$, $\left({\mathcal {F}}f\right)(\xi )$, ${\mathcal {F}}(f)$, ${\mathcal {F}}(\omega )$, ${\mathcal {F}}(j\omega )$, ${\mathcal {F}}\{f\}$ and ${\mathcal {F}}\left(f(t)\right).$ Though less commonly other notations are used. Denote the Fourier transform by a capital letter corresponding to the letter of function being transformed (such as f(x) and F(ξ)) is especially common in the sciences and engineering. In electronics, the omega (ω) is often used instead of ξ due to its interpretation as angular frequency, sometimes it is written as F(jω), where j is the imaginary unit, to indicate its relationship with the Laplace transform, and sometimes it is replaced with 2πf in order to use common frequency.

The interpretation of the complex function ${\hat {f}}(\xi )$ may be aided by expressing it in polar coordinate form:   ${\hat {f}}(\xi )=A(\xi )e^{i\varphi (\xi )}$ in terms of the two real functions A(ξ) and φ(ξ) where:

$A(\xi )=|{\hat {f}}(\xi )|,\,$

is the amplitude and

$\varphi (\xi )=\arg {\big (}{\hat {f}}(\xi ){\big )},$  

is the phase (see arg function).

Then the inverse transform can be written:

$f(x)=\int _{-\infty }^{\infty }A(\xi )\ e^{i(2\pi \xi x+\varphi (\xi ))}\,d\nu ,$

which is a recombination of all the frequency components of ƒ(x). Each component is a complex sinusoid of the form e^2πixξ  whose amplitude is A(ξ) and whose initial phase angle (at x = 0) is φ(ξ).

The Fourier transform may be thought of as a mapping on function spaces. This mapping is here denoted ${\mathcal {F}}$ and ${\mathcal {F}}(f)$ is used to denote the Fourier transform of the function f. This mapping is linear, which means that ${\mathcal {F}}$ can also be seen as a linear transformation on the function space and implies that the standard notation in linear algebra of applying a linear transformation to a vector (here the function f) can be used to write ${\mathcal {F}}f$ instead of ${\mathcal {F}}(f)$. Since the result of applying the Fourier transform is again a function, we can be interested in the value of this function evaluated at the value ξ for its variable, and this is denoted either as ${\mathcal {F}}(f)(\xi )$ or as $({\mathcal {F}}f)(\xi )$. Notice that in the former case, it is implicitly understood that ${\mathcal {F}}$ is applied first to f and then the resulting function is evaluated at ξ, not the other way around.

In mathematics and various applied sciences it is often necessary to distinguish between a function f and the value of f when its variable equals x, denoted f(x). This means that a notation like ${\mathcal {F}}(f(x))$ formally can be interpreted as the Fourier transform of the values of f at x. Despite this flaw, the previous notation appears frequently, often when a particular function or a function of a particular variable is to be transformed. For example, ${\mathcal {F}}(\mathrm {rect} (x))=\mathrm {sinc} (\xi )$ is sometimes used to express that the Fourier transform of a rectangular function is a sinc function, or ${\mathcal {F}}(f(x+x_{0}))={\mathcal {F}}(f(x))e^{2\pi i\xi x_{0}}$ is used to express the shift property of the Fourier transform. Notice, that the last example is only correct under the assumption that the transformed function is a function of x, not of x₀.

Other conventions

There are three common conventions for defining the Fourier transform. The Fourier transform is often written in terms of angular frequency:   ω = 2πξ whose units are radians per second.

The substitution ξ = ω/(2π) into the formulas above produces this convention:

${\hat {f}}(\omega )=\int _{\mathbb {R} ^{n}}f(x)e^{-i\omega \cdot x}\,dx$

Under this convention, the inverse transform becomes:

$f(x)={\frac {1}{(2\pi )^{n}}}\int _{\mathbb {R} ^{n}}{\hat {f}}(\omega )e^{i\omega \cdot x}\,d\omega .$

Unlike the convention followed in this article, when the Fourier transform is defined this way, it is no longer a unitary transformation on L²(Rⁿ). There is also less symmetry between the formulas for the Fourier transform and its inverse.

Another popular convention is to split the factor of (2π)ⁿ evenly between the Fourier transform and its inverse, which leads to definitions:

${\hat {f}}(\omega )={\frac {1}{(2\pi )^{n/2}}}\int _{\mathbb {R} ^{n}}f(x)e^{-i\omega \cdot x}\,dx$

$f(x)={\frac {1}{(2\pi )^{n/2}}}\int _{\mathbb {R} ^{n}}{\hat {f}}(\omega )e^{i\omega \cdot x}\,d\omega .$

Under this convention, the Fourier transform is again a unitary transformation on L²(Rⁿ). It also restores the symmetry between the Fourier transform and its inverse.

Variations of all three conventions can be created by conjugating the complex-exponential kernel of both the forward and the reverse transform. The signs must be opposites. Other than that, the choice is (again) a matter of convention.

Summary of popular forms of the Fourier transform

ordinary frequency ξ (hertz)	unitary	${\hat {f}}_{1}(\xi )\ {\stackrel {\mathrm {def} }{=}}\ \int _{\mathbb {R} ^{n}}f(x)e^{-2\pi ix\cdot \xi }\,dx={\hat {f}}_{2}(2\pi \xi )=(2\pi )^{n/2}{\hat {f}}_{3}(2\pi \xi )$ $f(x)=\int _{\mathbb {R} ^{n}}{\hat {f}}_{1}(\xi )e^{2\pi ix\cdot \xi }\,d\xi \$
angular frequency ω (rad/s)	non-unitary	${\hat {f}}_{2}(\omega )\ {\stackrel {\mathrm {def} }{=}}\int _{\mathbb {R} ^{n}}f(x)e^{-i\omega \cdot x}\,dx\ ={\hat {f}}_{1}\left({\frac {\omega }{2\pi }}\right)=(2\pi )^{n/2}\ {\hat {f}}_{3}(\omega )$ $f(x)={\frac {1}{(2\pi )^{n}}}\int _{\mathbb {R} ^{n}}{\hat {f}}_{2}(\omega )e^{i\omega \cdot x}\,d\omega \$
	unitary	${\hat {f}}_{3}(\omega )\ {\stackrel {\mathrm {def} }{=}}\ {\frac {1}{(2\pi )^{n/2}}}\int _{\mathbb {R} ^{n}}f(x)\ e^{-i\omega \cdot x}\,dx={\frac {1}{(2\pi )^{n/2}}}{\hat {f}}_{1}\left({\frac {\omega }{2\pi }}\right)={\frac {1}{(2\pi )^{n/2}}}{\hat {f}}_{2}(\omega )$ $f(x)={\frac {1}{(2\pi )^{n/2}}}\int _{\mathbb {R} ^{n}}{\hat {f}}_{3}(\omega )e^{i\omega \cdot x}\,d\omega \$

The ordinary-frequency convention (which is used in this article) is the one most often found in the mathematics literature. In the physics literature, the two angular-frequency conventions are more commonly used.

As discussed above, the characteristic function of a random variable is the same as the Fourier–Stieltjes transform of its distribution measure, but in this context it is typical to take a different convention for the constants. Typically characteristic function is defined $E(e^{it\cdot X})=\int e^{it\cdot x}d\mu _{X}(x)$. As in the case of the "non-unitary angular frequency" convention above, there is no factor of 2π appearing in either of the integral, or in the exponential. Unlike any of the conventions appearing above, this convention takes the opposite sign in the exponential.

Tables of important Fourier transforms

The following tables record some closed form Fourier transforms. For functions ƒ(x) , g(x) and h(x) denote their Fourier transforms by ${\hat {f}}$, ${\hat {g}}$, and ${\hat {h}}$ respectively. Only the three most common conventions are included.

Functional relationships

The Fourier transforms in this table may be found in (Erdélyi 1954) or the appendix of (Kammler 2000)

	Function	Fourier transform unitary, ordinary frequency	Fourier transform unitary, angular frequency	Fourier transform non-unitary, angular frequency	Remarks
	$f(x)\,$	${\hat {f}}(\xi )=$ $\int _{-\infty }^{\infty }f(x)e^{-2\pi ix\xi }\,dx$	${\hat {f}}(\omega )=$${\frac {1}{\sqrt {2\pi }}}\int _{-\infty }^{\infty }f(x)e^{-i\omega x}\,dx$	${\hat {f}}(\nu )=$ $\int _{-\infty }^{\infty }f(x)e^{-i\nu x}\,dx$
101	$a\cdot f(x)+b\cdot g(x)\,$	$a\cdot {\hat {f}}(\xi )+b\cdot {\hat {g}}(\xi )\,$	$a\cdot {\hat {f}}(\omega )+b\cdot {\hat {g}}(\omega )\,$	$a\cdot {\hat {f}}(\nu )+b\cdot {\hat {g}}(\nu )\,$	Linearity
102	$f(x-a)\,$	$e^{-2\pi ia\xi }{\hat {f}}(\xi )\,$	$e^{-ia\omega }{\hat {f}}(\omega )\,$	$e^{-ia\nu }{\hat {f}}(\nu )\,$	Shift in time domain
103	$e^{2\pi iax}f(x)\,$	${\hat {f}}\left(\xi -a\right)\,$	${\hat {f}}(\omega -2\pi a)\,$	${\hat {f}}(\nu -2\pi a)\,$	Shift in frequency domain, dual of 102
104	$f(ax)\,$	${\frac {1}{|a|}}{\hat {f}}\left({\frac {\xi }{a}}\right)\,$	${\frac {1}{|a|}}{\hat {f}}\left({\frac {\omega }{a}}\right)\,$	${\frac {1}{|a|}}{\hat {f}}\left({\frac {\nu }{a}}\right)\,$	If $|a|\,$ is large, then $f(ax)\,$ is concentrated around 0 and ${\frac {1}{|a|}}{\hat {f}}\left({\frac {\omega }{a}}\right)\,$ spreads out and flattens.
105	${\hat {f}}(x)\,$	$f(-\xi )\,$	$f(-\omega )\,$	$2\pi f(-\nu )\,$	Here ${\hat {f}}$ needs to be calculated using the same method as Fourier transform column. Results from swapping "dummy" variables of $t\,$ and $\omega \,$.
106	${\frac {d^{n}f(x)}{dx^{n}}}\,$	$(2\pi i\xi )^{n}{\hat {f}}(\xi )\,$	$(i\omega )^{n}{\hat {f}}(\omega )\,$	$(i\nu )^{n}{\hat {f}}(\nu )\,$
107	$x^{n}f(x)\,$	$\left({\frac {i}{2\pi }}\right)^{n}{\frac {d^{n}{\hat {f}}(\xi )}{d\xi ^{n}}}\,$	$i^{n}{\frac {d^{n}{\hat {f}}(\omega )}{d\omega ^{n}}}$	$i^{n}{\frac {d^{n}{\hat {f}}(\nu )}{d\nu ^{n}}}$	This is the dual of 106
108	$(f*g)(x)\,$	${\hat {f}}(\xi ){\hat {g}}(\xi )\,$	${\sqrt {2\pi }}{\hat {f}}(\omega ){\hat {g}}(\omega )\,$	${\hat {f}}(\nu ){\hat {g}}(\nu )\,$	The notation $f*g$ denotes the convolution of $f$ and $g$ — this rule is the convolution theorem
109	$f(x)g(x)\,$	$({\hat {f}}*{\hat {g}})(\xi )\,$	$({\hat {f}}*{\hat {g}})(\omega ) \over {\sqrt {2\pi }}\,$	${\frac {1}{2\pi }}({\hat {f}}*{\hat {g}})(\nu )\,$	This is the dual of 108
110	For $f(x)$ a purely real even function	${\hat {f}}(\omega )$, ${\hat {f}}(\xi )$ and ${\hat {f}}(\nu )\,$ are purely real even functions.
111	For $f(x)$ a purely real odd function	${\hat {f}}(\omega )$, ${\hat {f}}(\xi )$ and ${\hat {f}}(\nu )$ are purely imaginary odd functions.

Square-integrable functions

The Fourier transforms in this table may be found in (Campbell & Foster 1948), (Erdélyi 1954), or the appendix of (Kammler 2000)

	Function	Fourier transform unitary, ordinary frequency	Fourier transform unitary, angular frequency	Fourier transform non-unitary, angular frequency	Remarks
	$f(x)$	${\hat {f}}(\xi )=$ $\int _{-\infty }^{\infty }f(x)e^{-2\pi ix\xi }\,dx$	${\hat {f}}(\omega )=$ ${\frac {1}{\sqrt {2\pi }}}\int _{-\infty }^{\infty }f(x)e^{-i\omega x}\,dx$	${\hat {f}}(\nu )=$ $\int _{-\infty }^{\infty }f(x)e^{-i\nu x}\,dx$
201	$\operatorname {rect} (ax)\,$	${\frac {1}{|a|}}\cdot \operatorname {sinc} \left({\frac {\xi }{a}}\right)$	${\frac {1}{\sqrt {2\pi a^{2}}}}\cdot \operatorname {sinc} \left({\frac {\omega }{2\pi a}}\right)$	${\frac {1}{|a|}}\cdot \operatorname {sinc} \left({\frac {\nu }{2\pi a}}\right)$	The rectangular pulse and the normalized sinc function, here defined as sinc(x) = sin(πx)/(πx)
202	$\operatorname {sinc} (ax)\,$	${\frac {1}{|a|}}\cdot \operatorname {rect} \left({\frac {\xi }{a}}\right)\,$	${\frac {1}{\sqrt {2\pi a^{2}}}}\cdot \operatorname {rect} \left({\frac {\omega }{2\pi a}}\right)$	${\frac {1}{|a|}}\cdot \operatorname {rect} \left({\frac {\nu }{2\pi a}}\right)$	Dual of rule 201. The rectangular function is an ideal low-pass filter, and the sinc function is the non-causal impulse response of such a filter.
203	$\operatorname {sinc} ^{2}(ax)$	${\frac {1}{|a|}}\cdot \operatorname {tri} \left({\frac {\xi }{a}}\right)$	${\frac {1}{\sqrt {2\pi a^{2}}}}\cdot \operatorname {tri} \left({\frac {\omega }{2\pi a}}\right)$	${\frac {1}{|a|}}\cdot \operatorname {tri} \left({\frac {\nu }{2\pi a}}\right)$	The function tri(x) is the triangular function
204	$\operatorname {tri} (ax)$	${\frac {1}{|a|}}\cdot \operatorname {sinc} ^{2}\left({\frac {\xi }{a}}\right)\,$	${\frac {1}{\sqrt {2\pi a^{2}}}}\cdot \operatorname {sinc} ^{2}\left({\frac {\omega }{2\pi a}}\right)$	${\frac {1}{|a|}}\cdot \operatorname {sinc} ^{2}\left({\frac {\nu }{2\pi a}}\right)$	Dual of rule 203.
205	$e^{-ax}u(x)\,$	${\frac {1}{a+2\pi i\xi }}$	${\frac {1}{{\sqrt {2\pi }}(a+i\omega )}}$	${\frac {1}{a+i\nu }}$	The function u(x) is the Heaviside unit step function and a>0.
206	$e^{-\alpha x^{2}}\,$	${\sqrt {\frac {\pi }{\alpha }}}\cdot e^{-{\frac {(\pi \xi )^{2}}{\alpha }}}$	${\frac {1}{\sqrt {2\alpha }}}\cdot e^{-{\frac {\omega ^{2}}{4\alpha }}}$	${\sqrt {\frac {\pi }{\alpha }}}\cdot e^{-{\frac {\nu ^{2}}{4\alpha }}}$	This shows that, for the unitary Fourier transforms, the Gaussian function exp(−αx2) is its own Fourier transform for some choice of α. For this to be integrable we must have Re(α)>0.
207	$\operatorname {e} ^{-a|x|}\,$	${\frac {2a}{a^{2}+4\pi ^{2}\xi ^{2}}}$	${\sqrt {\frac {2}{\pi }}}\cdot {\frac {a}{a^{2}+\omega ^{2}}}$	${\frac {2a}{a^{2}+\nu ^{2}}}$	For a>0.
208	${\frac {J_{n}(x)}{x}}\,$	${\frac {2i}{n}}(-i)^{n}\cdot U_{n-1}(2\pi \xi )\,$   $\cdot \ {\sqrt {1-4\pi ^{2}\xi ^{2}}}\operatorname {rect} (\pi \xi )$	${\sqrt {\frac {2}{\pi }}}{\frac {i}{n}}(-i)^{n}\cdot U_{n-1}(\omega )\,$   $\cdot \ {\sqrt {1-\omega ^{2}}}\operatorname {rect} \left({\frac {\omega }{2}}\right)$	${\frac {2i}{n}}(-i)^{n}\cdot U_{n-1}(\nu )\,$   $\cdot \ {\sqrt {1-\nu ^{2}}}\operatorname {rect} \left({\frac {\nu }{2}}\right)$	The functions Jn (x) are the n-th order Bessel functions of the first kind. The functions Un (x) are the Chebyshev polynomial of the second kind. See 315 and 316 below.
209	$\operatorname {sech} (ax)\,$	${\frac {\pi }{a}}\operatorname {sech} \left({\frac {\pi ^{2}}{a}}\xi \right)$	${\frac {1}{a}}{\sqrt {\frac {\pi }{2}}}\operatorname {sech} \left({\frac {\pi }{2a}}\omega \right)$	${\frac {\pi }{a}}\operatorname {sech} \left({\frac {\pi }{2a}}\nu \right)$	Hyperbolic secant is its own Fourier transform

Distributions

The Fourier transforms in this table may be found in (Erdélyi 1954) or the appendix of (Kammler 2000)

	Function	Fourier transform unitary, ordinary frequency	Fourier transform unitary, angular frequency	Fourier transform non-unitary, angular frequency	Remarks
	$f(x)$	${\hat {f}}(\xi )=$ $\int _{-\infty }^{\infty }f(x)e^{-2\pi ix\xi }\,dx$	${\hat {f}}(\omega )=$ ${\frac {1}{\sqrt {2\pi }}}\int _{-\infty }^{\infty }f(x)e^{-i\omega x}\,dx$	${\hat {f}}(\nu )=$ $\int _{-\infty }^{\infty }f(x)e^{-i\nu x}\,dx$
301	$1$	$\delta (\xi )$	${\sqrt {2\pi }}\cdot \delta (\omega )$	$2\pi \delta (\nu )$	The distribution δ(ξ) denotes the Dirac delta function.
302	$\delta (x)\,$	$1$	${\frac {1}{\sqrt {2\pi }}}\,$	$1$	Dual of rule 301.
303	$e^{iax}$	$\delta \left(\xi -{\frac {a}{2\pi }}\right)$	${\sqrt {2\pi }}\cdot \delta (\omega -a)$	$2\pi \delta (\nu -a)$	This follows from 103 and 301.
304	$\cos(ax)$	${\frac {\displaystyle \delta \left(\xi -{\frac {a}{2\pi }}\right)+\delta \left(\xi +{\frac {a}{2\pi }}\right)}{2}}$	${\sqrt {2\pi }}\cdot {\frac {\delta (\omega -a)+\delta (\omega +a)}{2}}\,$	$\pi \left(\delta (\nu -a)+\delta (\nu +a)\right)$	This follows from rules 101 and 303 using Euler's formula: $\displaystyle \cos(ax)=(e^{iax}+e^{-iax})/2.$
305	$\sin(ax)$	$i\cdot {\frac {\displaystyle \delta \left(\xi +{\frac {a}{2\pi }}\right)-\delta \left(\xi -{\frac {a}{2\pi }}\right)}{2}}$	$i{\sqrt {2\pi }}\cdot {\frac {\delta (\omega +a)-\delta (\omega -a)}{2}}$	$i\pi \left(\delta (\nu +a)-\delta (\nu -a)\right)$	This follows from 101 and 303 using $\displaystyle \sin(ax)=(e^{iax}-e^{-iax})/(2i).$
306	$\cos(ax^{2})$	${\sqrt {\frac {\pi }{a}}}\cos \left({\frac {\pi ^{2}\xi ^{2}}{a}}-{\frac {\pi }{4}}\right)$	${\frac {1}{\sqrt {2a}}}\cos \left({\frac {\omega ^{2}}{4a}}-{\frac {\pi }{4}}\right)$	${\sqrt {\frac {\pi }{a}}}\cos \left({\frac {\nu ^{2}}{4a}}-{\frac {\pi }{4}}\right)$
307	$\sin(ax^{2})\,$	$-{\sqrt {\frac {\pi }{a}}}\sin \left({\frac {\pi ^{2}\xi ^{2}}{a}}-{\frac {\pi }{4}}\right)$	${\frac {-1}{\sqrt {2a}}}\sin \left({\frac {\omega ^{2}}{4a}}-{\frac {\pi }{4}}\right)$	$-{\sqrt {\frac {\pi }{a}}}\sin \left({\frac {\nu ^{2}}{4a}}-{\frac {\pi }{4}}\right)$
308	$x^{n}\,$	$\left({\frac {i}{2\pi }}\right)^{n}\delta ^{(n)}(\xi )\,$	$i^{n}{\sqrt {2\pi }}\delta ^{(n)}(\omega )\,$	$2\pi i^{n}\delta ^{(n)}(\nu )\,$	Here, n is a natural number and $\displaystyle \delta ^{(n)}(\xi )$ is the n-th distribution derivative of the Dirac delta function. This rule follows from rules 107 and 301. Combining this rule with 101, we can transform all polynomials.
309	${\frac {1}{x}}$	$-i\pi \operatorname {sgn}(\xi )$	$-i{\sqrt {\frac {\pi }{2}}}\operatorname {sgn}(\omega )$	$-i\pi \operatorname {sgn}(\nu )$	Here sgn(ξ) is the sign function. Note that 1/x is not a distribution. It is necessary to use the Cauchy principal value when testing against Schwartz functions. This rule is useful in studying the Hilbert transform.
310	${\frac {1}{x^{n}}}$	$-i\pi {\frac {(-2\pi i\xi )^{n-1}}{(n-1)!}}\operatorname {sgn}(\xi )$	$-i{\sqrt {\frac {\pi }{2}}}\cdot {\frac {(-i\omega )^{n-1}}{(n-1)!}}\operatorname {sgn}(\omega )$	$-i\pi {\frac {(-i\nu )^{n-1}}{(n-1)!}}\operatorname {sgn}(\nu )$	Generalization of rule 309.
311	${\frac {1}{\sqrt {|x|}}}\,$	${\frac {1}{\sqrt {|\xi |}}}$	${\frac {1}{\sqrt {|\omega |}}}$	${\frac {\sqrt {2\pi }}{\sqrt {|\nu |}}}$
312	$\operatorname {sgn}(x)$	${\frac {1}{i\pi \xi }}$	${\sqrt {\frac {2}{\pi }}}\cdot {\frac {1}{i\omega }}\,$	${\frac {2}{i\nu }}$	The dual of rule 309. This time the Fourier transforms need to be considered as Cauchy principal value.
313	$u(x)$	${\frac {1}{2}}\left({\frac {1}{i\pi \xi }}+\delta (\xi )\right)$	${\sqrt {\frac {\pi }{2}}}\left({\frac {1}{i\pi \omega }}+\delta (\omega )\right)$	$\pi \left({\frac {1}{i\pi \nu }}+\delta (\nu )\right)$	The function u(x) is the Heaviside unit step function; this follows from rules 101, 301, and 312.
314	$\sum _{n=-\infty }^{\infty }\delta (x-nT)$	${\frac {1}{T}}\sum _{k=-\infty }^{\infty }\delta \left(\xi -{\frac {k}{T}}\right)$	${\frac {\sqrt {2\pi }}{T}}\sum _{k=-\infty }^{\infty }\delta \left(\omega -{\frac {2\pi k}{T}}\right)$	${\frac {2\pi }{T}}\sum _{k=-\infty }^{\infty }\delta \left(\nu -{\frac {2\pi k}{T}}\right)$	This function is known as the Dirac comb function. This result can be derived from 302 and 102, together with the fact that $\sum _{n=-\infty }^{\infty }e^{inx}=\sum _{k=-\infty }^{\infty }\delta (x+2\pi k)$ as distributions.
315	$J_{0}(x)$	${\frac {2\,\operatorname {rect} (\pi \xi )}{\sqrt {1-4\pi ^{2}\xi ^{2}}}}$	${\sqrt {\frac {2}{\pi }}}\cdot {\frac {\operatorname {rect} \left(\displaystyle {\frac {\omega }{2}}\right)}{\sqrt {1-\omega ^{2}}}}$	${\frac {2\,\operatorname {rect} \left(\displaystyle {\frac {\nu }{2}}\right)}{\sqrt {1-\nu ^{2}}}}$	The function J0(x) is the zeroth order Bessel function of first kind.
316	$J_{n}(x)$	${\frac {2(-i)^{n}T_{n}(2\pi \xi )\operatorname {rect} (\pi \xi )}{\sqrt {1-4\pi ^{2}\xi ^{2}}}}$	${\sqrt {\frac {2}{\pi }}}{\frac {(-i)^{n}T_{n}(\omega )\operatorname {rect} \left(\displaystyle {\frac {\omega }{2}}\right)}{\sqrt {1-\omega ^{2}}}}$	${\frac {2(-i)^{n}T_{n}(\nu )\operatorname {rect} \left(\displaystyle {\frac {\nu }{2}}\right)}{\sqrt {1-\nu ^{2}}}}$	This is a generalization of 315. The function Jn(x) is the n-th order Bessel function of first kind. The function Tn(x) is the Chebyshev polynomial of the first kind.

Two-dimensional functions

	Function	Fourier transform unitary, ordinary frequency	Fourier transform unitary, angular frequency	Fourier transform non-unitary, angular frequency	Remarks
	$f(x,y)$	${\hat {f}}(\xi _{x},\xi _{y})=$ $\iint f(x,y)e^{-2\pi i(\xi _{x}x+\xi _{y}y)}\,dxdy$	${\hat {f}}(\omega _{x},\omega _{y})=$ ${\frac {1}{2\pi }}\iint f(x,y)e^{-i(\omega _{x}x+\omega _{y}y)}\,dxdy$	${\hat {f}}(\nu _{x},\nu _{y})=$ $\iint f(x,y)e^{-i(\nu _{x}x+\nu _{y}y)}\,dxdy$	The variables ξx, ξy, ωx, ωy, νx and νy are real numbers. The integrals are taken over the entire plane.
401	$e^{-\pi \left(a^{2}x^{2}+b^{2}y^{2}\right)}$	${\frac {1}{|ab|}}e^{-\pi \left(\xi _{x}^{2}/a^{2}+\xi _{y}^{2}/b^{2}\right)}$	${\frac {1}{2\pi \cdot |ab|}}e^{\frac {-\left(\omega _{x}^{2}/a^{2}+\omega _{y}^{2}/b^{2}\right)}{4\pi }}$	${\frac {1}{|ab|}}e^{\frac {-\left(\nu _{x}^{2}/a^{2}+\nu _{y}^{2}/b^{2}\right)}{4\pi }}$	Both functions are Gaussians, which may not have unit volume.
402	$\mathrm {circ} ({\sqrt {x^{2}+y^{2}}})$	${\frac {J_{1}\left(2\pi {\sqrt {\xi _{x}^{2}+\xi _{y}^{2}}}\right)}{\sqrt {\xi _{x}^{2}+\xi _{y}^{2}}}}$	${\frac {J_{1}\left({\sqrt {\omega _{x}^{2}+\omega _{y}^{2}}}\right)}{\sqrt {\omega _{x}^{2}+\omega _{y}^{2}}}}$	${\frac {2\pi J_{1}\left({\sqrt {\nu _{x}^{2}+\nu _{y}^{2}}}\right)}{\sqrt {\nu _{x}^{2}+\nu _{y}^{2}}}}$	The function is defined by circ(r)=1 0≤r≤1, and is 0 otherwise. This is the Airy distribution and is expressed using J1 (the order 1 Bessel function of the first kind). (Stein & Weiss 1971, Thm. IV.3.3)

Formulas for general n-dimensional functions

	Function	Fourier transform unitary, ordinary frequency	Fourier transform unitary, angular frequency	Fourier transform non-unitary, angular frequency	Remarks
	$f(x)\,$	${\hat {f}}(\xi )=$ $\int _{\mathbb {R} ^{n}}f(x)e^{-2\pi ix\cdot \xi }\,d^{n}x$	${\hat {f}}(\omega )=$${\frac {1}{{(2\pi )}^{(n/2)}}}\int _{\mathbb {R} ^{n}}f(x)e^{-i\omega \cdot x}\,d^{n}x$	${\hat {f}}(\nu )=$ $\int _{\mathbb {R} ^{n}}f(x)e^{-ix\cdot \nu }\,d^{n}x$
501	$\chi _{[0,1]}(|x|)(1-|x|^{2})^{\delta }$	$\pi ^{-\delta }\Gamma (\delta +1)|\xi |^{-(n/2)-\delta }$ $\cdot J_{n/2+\delta }(2\pi |\xi |)$	$2^{-\delta }\Gamma (\delta +1)\left|\omega \right|^{-(n/2)-\delta }$ $\cdot J_{n/2+\delta }(|\omega |)$	$\pi ^{-\delta }\Gamma (\delta +1)\left|{\frac {\nu }{2\pi }}\right|^{-(n/2)-\delta }$ $\cdot J_{n/2+\delta }(|\nu |)$	The function χ[0,1] is the characteristic function of the interval [0,1]. The function Γ(x) is the gamma function. The function Jn/2 + δ a Bessel function of the first kind with order n/2+δ. Taking n = 2 and δ = 0 produces 402. (Stein & Weiss 1971, Thm. 4.13)

See also

• Fourier series
• Fast Fourier transform
• Laplace transform
• Discrete Fourier transform
  • DFT matrix
• Discrete-time Fourier transform
• Fractional Fourier transform
• Linear canonical transform
• Fourier sine transform
• Short-time Fourier transform
• Analog signal processing
• Transform (mathematics)

References

• Bochner S.,Chandrasekharan K. (1949). Fourier Transforms. Princeton University Press.
• Bracewell, R. N. (2000), The Fourier Transform and Its Applications (3rd ed.), Boston: McGraw-Hill.
• Campbell, George; Foster, Ronald (1948), Fourier Integrals for Practical Applications, New York: D. Van Nostrand Company, Inc..
• Duoandikoetxea, Javier (2001), Fourier Analysis, American Mathematical Society, ISBN 0-8218-2172-5.
• Dym, H; McKean, H (1985), Fourier Series and Integrals, Academic Press, ISBN 978-0122264511.
• Erdélyi, Arthur, ed. (1954), Tables of Integral Transforms, vol. 1, New Your: McGraw-Hill
• Grafakos, Loukas (2004), Classical and Modern Fourier Analysis, Prentice-Hall, ISBN 0-13-035399-X.
• Hewitt, Edwin; Ross, Kenneth A. (1970), Abstract harmonic analysis. Vol. II: Structure and analysis for compact groups. Analysis on locally compact Abelian groups, Die Grundlehren der mathematischen Wissenschaften, Band 152, Berlin, New York: Springer-Verlag, MR0262773.
• Hörmander, L. (1976), Linear Partial Differential Operators, Volume 1, Springer-Verlag, ISBN 978-3540006626.
• James, J.F. (2002), A Student's Guide to Fourier Transforms (2nd ed.), New York: Cambridge University Press, ISBN 0-521-00428-4.
• Kaiser, Gerald (1994), A Friendly Guide to Wavelets, Birkhäuser, ISBN 0-8176-3711-7
• Kammler, David (2000), A First Course in Fourier Analysis, Prentice Hall, ISBN 0-13-578782-3
• Katznelson, Yitzhak (1976), An introduction to Harmonic Analysis, Dover, ISBN 0-486-63331-4
• Knapp, Anthony W. (2001), Representation Theory of Semisimple Groups: An Overview Based on Examples, Princeton University Press, ISBN 978-0-691-09089-4
• Pinsky, Mark (2002), Introduction to Fourier Analysis and Wavelets, Brooks/Cole, ISBN 0-534-37660-6
• Polyanin, A. D.; Manzhirov, A. V. (1998), Handbook of Integral Equations, Boca Raton: CRC Press, ISBN 0-8493-2876-4.
• Rudin, Walter (1987), Real and Complex Analysis (Third ed.), Singapore: McGraw-Hill, ISBN 0-07-100276-6 {{citation}}: Unknown parameter |publilsher= ignored (|publisher= suggested) (help).
• Stein, Elias; Shakarchi, Rami (2003), Fourier Analysis: An introduction, Princeton University Press, ISBN 0-691-11384-X.
• Stein, Elias; Weiss, Guido (1971), Introduction to Fourier Analysis on Euclidean Spaces, Princeton, N.J.: Princeton University Press, ISBN 978-0-691-08078-9 {{citation}}: Unknown parameter |publilsher= ignored (|publisher= suggested) (help).
• Wilson, R. G. (1995), Fourier Series and Optical Transform Techniques in Contemporary Optics, New York: Wiley, ISBN 0471303577 {{citation}}: Unknown parameter |publilsher= ignored (|publisher= suggested) (help).
• Yosida, K. (1968), Functional Analysis, Springer-Verlag, ISBN 3-540-58654-7.

External links

• Fourier Series Applet (Tip: drag magnitude or phase dots up or down to change the wave form).
• Tables of Integral Transforms at EqWorld: The World of Mathematical Equations.
• Weisstein, Eric W. "Fourier Transform". MathWorld.
• Fourier Transform Module by John H. Mathews
• The DFT “à Pied”: Mastering The Fourier Transform in One Day at The DSP Dimension