Jump to content

Bridge No. 4 (La Crosse, Wisconsin)

Coordinates: 44°1′24″N 91°19′14″W / 44.02333°N 91.32056°W / 44.02333; -91.32056
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Citation bot (talk | contribs) at 00:37, 2 February 2021 (Misc citation tidying. | You can use this bot yourself. Report bugs here. | Suggested by Abductive | Category:Steel bridges in the United States‎ | via #UCB_Category 173/924). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Bridge No. 4
Bridge No. 4 (La Crosse, Wisconsin) is located in Wisconsin
Bridge No. 4 (La Crosse, Wisconsin)
Bridge No. 4 (La Crosse, Wisconsin) is located in the United States
Bridge No. 4 (La Crosse, Wisconsin)
Nearest cityLa Crosse, Wisconsin
Coordinates44°1′24″N 91°19′14″W / 44.02333°N 91.32056°W / 44.02333; -91.32056
Area0.7 acres (0.28 ha)
Built1902
Built byClinton Bridge Company
Architectural styleBowstring truss bridge
MPSVan Loon Wildlife Area Truss Bridge TR
NRHP reference No.80000149[1]
Added to NRHPFebruary 27, 1980

Bridge No. 4, near La Crosse, Wisconsin, United States, was built in 1902. It is a bowstring truss bridge built by the Clinton Bridge Company. It was listed on the National Register of Historic Places in 1980.[1]

It is one of seven bridges built during 1891-92 by the Clinton Bridge Company, of Clinton, Iowa, to bring a La Crosse County road through backwaters of the Black River and then cross the Black River itself, connecting the city of La Crosse with rural Trempeleau County. All seven were Bowstring truss bridges, but one was replaced by a kingpost truss bridge nine years after being damaged in 1911. The kingpost one and all but the main bridge spanning the Black River itself survived in 1979.[2]

The Black River had previously been crossed by a ferry started by Alex McGilvray in 1861.[2]

The bridge consists of two spans, and is 17 feet (5.2 m) wide and 131 feet (40 m) long. It has a concrete deck. Its steel was from the Jones and Laughlin Steel Company. The tension members of the bridge "are a combination of round and square eye-bars with the eyes made by looping over and welding the end of the bar."[2]: 2 [3]

References

  1. ^ a b "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010.
  2. ^ a b c Patricia Marks (June 1979). "National Register of Historic Places Multiple Property Documentation: Van Loon Wildlife Area Truss Bridge TR". National Park Service. Retrieved January 13, 2017.
  3. ^ There is not a separate NRHP nomination available for the bridge, but there is a photo from 1979.