Jump to content

Electret

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 216.17.159.130 (talk) at 18:13, 1 May 2020 (→Materials: typo). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Not to be confused with Electromagnet.

An electret (formed of electr- from "electricity" and -et from "magnet") is a dielectric material that has a quasi-permanent electric charge or dipole polarisation. An electret generates internal and external electric fields, and is the electrostatic equivalent of a permanent magnet. Although Oliver Heaviside coined this term in 1885, materials with electret properties were already known to science and had been studied since the early 1700s. One particular example is the electrophorus, a device consisting of a slab with electret properties and a separate metal plate. The electrophorus was originally invented by Johan Carl Wilcke in Sweden and again by Alessandro Volta in Italy.

The name derives from "electron" and "magnet"; drawing analogy to the formation of a magnet by alignment of magnetic domains in a piece of iron. Historically, electrets were made by first melting a suitable dielectric material such as a polymer or wax that contains polar molecules, and then allowing it to re-solidify in a powerful electrostatic field. The polar molecules of the dielectric align themselves to the direction of the electrostatic field, producing a dipole electret with a permanent electrostatic bias. Modern electrets are usually made by embedding excess charges into a highly insulating dielectric, e.g. by means of an electron beam, corona discharge, injection from an electron gun, electric breakdown across a gap, or a dielectric barrier.

Similarity to magnets

Electrets, like magnets, are dipoles. Another similarity is the radiant fields: they produce an electrostatic field (as opposed to a magnetic field) around their perimeter. When a magnet and an electret are near one another, a rather unusual phenomenon occurs: while stationary, neither has any effect on one another. However, when an electret is moved with respect to a magnetic pole, a force is felt which acts perpendicular to the magnetic field, pushing the electret along a path 90 degrees to the expected direction of "push" as would be felt with another magnet.

Similarity to capacitors

There is a similarity between an electret and the dielectric layer used in capacitors; the difference is that dielectrics in capacitors have an induced polarisation that is only transient, dependent on the potential applied on the dielectric, while dielectrics with electret properties exhibit quasi-permanent charge storage or dipole polarisation in addition. Some materials also display ferroelectricity (i.e. they react to the external fields with a hysteresis of the polarisation). Ferroelectrics can retain the polarisation permanently because they are in thermodynamic equilibrium, and thus are used in ferroelectric capacitors. Although electrets are only in a metastable state, those fashioned from very low leakage materials can retain excess charge or polarisation for many years. An electret microphone is a type of condenser microphone that eliminates the need for a power supply by using a permanently charged material.

Electret types

There are two types of electrets:

  • Real-charge electrets which contain excess charge of one or both polarities, either
  • Oriented-dipole electrets contain oriented (aligned) dipoles. Ferroelectric materials are one variant of these.

Cellular space charge electrets with internal bipolar charges at the voids provide a new class of electret materials, that mimic ferroelectrics, hence they are known as ferroelectrets. Ferroelectrets display strong piezoelectricity, comparable to ceramic piezoelectric materials. Some dielectric materials are capable of exhibiting both behaviors.

Materials

Electret materials are quite common in nature. Quartz and other forms of silicon dioxide, for example, are naturally occurring electrets. Today, most electrets are made from synthetic polymers, e.g. fluoropolymers, polypropylene, polyethyleneterephthalate (PET), etc. Real-charge electrets contain either positive or negative excess charges or both, while oriented-dipole electrets contain oriented dipoles. The quasi-permanent internal or external electric fields created by electrets can be exploited in various applications.

Manufacture

Bulk electrets can be prepared by heating or melting the material, then cooling it in the presence of a strong electric field. The electric field repositions the charge carriers or aligns the dipoles within the material. When the material cools, solidification "freezes" the dipoles in position. Materials used for electrets are usually waxes, polymers or resins. One of the earliest recipes consists of 45% carnauba wax, 45% white rosin, and 10% white beeswax, melted, mixed together, and left to cool in a static electric field of several kilovolts/cm. The thermo-dielectric effect, related to this process, was first described by Brazilian researcher Joaquim Costa Ribeiro.

Electrets can also be manufactured by embedding excess negative charge within a dielectric using a particle accelerator, or by stranding charges on, or near, the surface using high voltage corona discharges, a process called corona charging. Excess charge within an electret decays exponentially. The decay constant is a function of the material's relative dielectric constant and its bulk resistivity. Materials with extremely high resistivity, such as PTFE, may retain excess charge for many hundreds of years.[citation needed] Most commercially produced electrets are based on fluoropolymers (e.g. amorphous Teflon) machined to thin films.

Applications

Electret materials have found commercial and technical interest. For example, they are used in electret microphones and in copy machines. They are also used in some types of air filters, for electrostatic collection of dust particles, in electret ion chambers for measuring ionizing radiation or radon and in vibration energy harvesting.[1]

Further reading

  • Jefimenko, Oleg D. (2011). Electrostatic Motors: Their History, Types, and Principles of Operation (1st New Revised ed.). Integrity Research Institute. ISBN 978-1935023470.
  • Jefimenko, Oleg D.; Walker, David K. (1980). "Electrets". Physics Teacher. 18 (9): 651–659. Bibcode:1980PhTea..18..651J. doi:10.1119/1.2340651.
  • Walker, David K.; Jefimenko, Oleg D. (1973). "Volume charge distribution in carnauba wax electrets". Journal of Applied Physics. 44 (8): 3459. Bibcode:1973JAP....44.3459W. doi:10.1063/1.1662785.
  • Adams, Charles K. (1987). Nature's Electricity. TAB Books. ISBN 978-0-8306-2769-1.
  • Gross, Bernhard (1964). Charge storage in solid dielectrics; a bibliographical review on the electret and related effects. Elsevier.
  • Sessler, Gerhard M., ed. (1998). Electrets (3rd ed.). Laplacian Press. ISBN 978-1-885540-07-2.

See also

Look up electret in Wiktionary, the free dictionary.

References

  1. ^ Electret Energy Harvester - Tikalon Blog, by Dev Gualtieri

Patents

Retrieved from "https://en.wikipedia.org/w/index.php?title=Electret&oldid=954300201"