Blast wall
A blast wall is a barrier designed to protect vulnerable buildings or other structures and the people inside them from the effects of a nearby explosion, whether caused by industrial accident, military action or terrorism.
Effectiveness
Research by Cranfield University Defence Academy, building on earlier work, has shown that blast walls have the following properties:
- A non-deforming upright wall will significantly reduce the peak blast overpressure and impulse in an area between 4 and 6 wall heights behind it
- Similar protection occurs at greater distances behind the wall, but to a diminishing extent
- Blast walls perform best if the explosion is relatively close to the front of the wall[1]
- "Canopied" walls (with a top section overhanging the front face) show some improved blast protection over plane walls
- A 90-degree canopy is more effective than a 45-degree one[2]
- Walls containing sand or water work well, and cause little damage if they fail
- A wall has to stay intact long enough to "interact" with the blast in order to have any effect[3]
Types
Permanent blast walls can be made from pre-cast reinforced concrete,[4] or steel sheeting.[5] Various types of moveable blast wall have been manufactured. These include the Bremer wall concrete barriers used in Iraq and Afghanistan by US Armed Forces, and the HESCO bastions, wire mesh containers filled with sand or soil, which are used by British Armed Forces.
See also
References
- ^ Smith, Peter. "THE EFFECTIVENESS OF BLAST WALLS" (PDF). www.civ.uth.gr/. Department of Civil Engineering, University of Thessaly. Retrieved 6 November 2014. (p. 5)
- ^ Smith p. 7
- ^ Smith p. 11
- ^ Smith p. 13
- ^ Louca, L A; Boh, J W (2004). "Analysis and Design of Profiled Blast Walls" (PDF). www.hse.gov.uk. Health and Safety Executive. Retrieved 6 November 2014.
External links
Media related to Blast barriers at Wikimedia Commons
 | This military base or fortification article is a stub. You can help Wikipedia by expanding it. |