Lamellophone

A lamellophone (also lamellaphone or linguaphone, from the Latin root lingua meaning "tongue", i.e., a long thin plate that is fixed only at one end) is any of a family of musical instruments. The name comes from the Latin word lamella for "small metal plate",^[1] and the Greek word φωνή phonē for "sound, voice".^[2]

The instrument has a series of thin plates, or "tongues", each of which is fixed at one end and has the other end free. When the musician depresses the free end of a plate with a finger or fingernail, and then allows the finger to slip off, the released plate vibrates.

The lamellophones constitute category 12 in the Hornbostel–Sachs system for classifying musical instruments, plucked idiophones. These idiophones are equipped with one or more tongues or lammelae that produce sound by being plucked by the performer. There are two main categories of plucked idiophones, those that are in the form of a frame (121) and those that are in the form of a comb (122). Parts of a lamellaphone are bicycle spokes..etc

African lamellophones

A large number of lamellophones originate in Africa, where they are known under different names including mbira, sanza, kisanji, likembe, kalimba, and kongoma. They play a role in southeast African Music. They were reported as early as the 16th century, but there is no doubt they have a much longer history. The Caribbean marímbula is also of this family. The marímbula can be seen as a bass variant of the mbira and is sometimes used in hiphop music.^{[citation needed]}

In most cases the tongues are divided in two playing halves with the lowest notes in the centre; from there to the left and to the right each tongue is tuned higher than the previous one. The tongues may also be arranged in a linear arrangement in the manner of a piano. Tongues may be made small enough to play with individual fingers, hence the colloquial name "thumb piano". (Although some instruments, like the Mbira, have an additional rows of tongues, in which case not just the thumbs are used for plucking.)^{[citation needed]}

Some conjecture that African lamellophones were derived from xylophones and marimbas. However, similar instruments have been found elsewhere; for example, the indigenous peoples of Siberia play wooden and metallic lamellophones with a single tongue.^{[citation needed]}

Lamellophones may be made with or without resonators. There are also electric lamellophones with an additional pickup.

Schaeffner's classification

Schaeffner's musical instrument classification scheme has a post-prominent place for the linguaphones (lamellophones) at the second highest level of classification.

In 1932, Andre Schaeffner developed a new classification scheme that was "exhaustive, potentially covering all real and conceivable instruments" [Kartomi, p. 176]. Schaeffner's system has only two top-level categories denoted by Roman numerals (Schaeffner, A.: Origine des instruments de musique, pp. 371–377.):

I: instruments that make sound from vibrating solids;
- IA Solids not susceptibles of tension (equivalent to a big part of Hornbostel & Sachs idiophones);
- IB Flexible solids (equivalent to mainly linguaphones);
- IC Tensionable solids (equivalent to both membranophones and chordophones);
II: instruments that make sound from vibrating air (aerophones).

List of lamellophones

In the form of a frame (121)

The lamellae vibrate within a frame or hoop

121.1 Clack idiophones or Cricri - The lamella is carved in the surface of a fruit shell, which serves as resonator.^[3] Also known as galip nut snapper.^[4]

121.2 Guimbardes and jaw harps - The lamella is mounted in a rod- or plaque-shaped frame and depends on the player's mouth cavity for resonance.

121.21 Idioglot guimbardes - The lamella is of one substance with the frame of the instrument.

Đàn môi

121.22 Heteroglot guimbardes - The lamella is attached to the frame.

121.221 Individual heteroglot guimbardes.

121.222 Sets of heteroglot guimbardes.

Kouxian

In the form of a comb (122)

The lamellae are tied to a board or cut out from a board like the teeth of a comb. 122.1 With laced on lamellae.

122.11 Without resonator.

122.12 With resonator.

122.2 With cut-out lamellae

References

Gerhard Kubik: "Lamellophone", in: The New Grove Dictionary of Music and Musicians (ed. Stanley Sadie). Macmillan Publishers, London, 1981

Specific

^ lamella. Charlton T. Lewis and Charles Short. A Latin Dictionary on Perseus Project.
^ φωνή. Liddell, Henry George; Scott, Robert; A Greek–English Lexicon at the Perseus Project.
^ "SVH Classification", Virtual Instrument Museum at the Wayback Machine (archived 17 February 2013)
^ Fischer, Hans (1983/1986). Sound-producing Instruments in Oceania, p.52. Institute of Papua New Guinea Studies. ASIN: B0010S35VW.

External links

Lamellophone players list from N. Scott Robinson site
"Idiophone", Virginia Tech Multimedia Music Dictionary at the Wayback Machine (archived 11 October 2014) and "Idiophone", OnMusic Dictionary (accessed 24 May 2020).
"SVH Classification", Virtual Instrument Museum at the Wayback Machine (archived 17 February 2013)

[1] . Charlton T. Lewis and Charles Short. A Latin Dictionary on Perseus Project.

[2] φωνή. Liddell, Henry George; Scott, Robert; A Greek–English Lexicon at the Perseus Project.

[3] "SVH Classification", Virtual Instrument Museum at the Wayback Machine (archived 17 February 2013)

[4] Fischer, Hans (1983/1986). Sound-producing Instruments in Oceania, p.52. Institute of Papua New Guinea Studies. ASIN: B0010S35VW.

[1]

[2]

[3]

[4]