SES-1

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by CRS-20 (talk | contribs) at 04:25, 18 June 2020. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

SES-1
Mission typeCommunication
OperatorSES S.A.
COSPAR ID2010-016A Edit this at Wikidata
SATCAT no.36516
Websitehttps://www.ses.com/
Mission duration15 years
Spacecraft properties
BusStar-2.4
ManufacturerOrbital Sciences Corporation
Launch mass3170 kg
Power5000 watts
Start of mission
Launch date24 April 2010, 11:19:00 UTC
RocketProton-M/Briz-M
Launch siteBaikonur, Site 200/39
ContractorKhrunichev
Orbital parameters
Reference systemGeocentric orbit
RegimeGeostationary orbit
Longitude101° West (2013-present)
Transponders
Band24 C-band
24 Ku-band
Coverage areaC-band (USA, Mexico, Caribbean, Canada, Central America)
Ku-band (USA, Southern Canada, Northern Mexico)
 

SES-1 is a geostationary communications satellite which is operated by SES World Skies, then by SES S.A.

History

It was originally ordered by SES Americom as a ground spare for AMC-5R, however in April 2008 a decision was made to launch it, and it was named AMC-1R. It was subsequently renamed AMC-4R, and finally SES-1 after SES Americom merged with SES New Skies to form SES World Skies.[1] It was the third SES World Skies satellite to be launched following the merger, but the first to carry the new SES designation.[2] SES-1 operates in geostationary orbit, and is intended to be located at a longitude of 101° West, where it will replace the AMC-2 and AMC-4 satellites, and be used broadcast high-definition television to very small aperture terminals in the United States.[3]

Spacecraft

SES-1 was built by Orbital Sciences Corporation, and is based on the Star-2.4 satellite bus. It is equipped with 24 C band, and 24 Ku-band transponders, and at launch it had a mass of 3,170 kilograms (6,990 lb). It has a design life of fifteen years, however it was launched with enough fuel to operate for at least sixteen years, if its systems are still functional.[1]

Launch

The launch of SES-1 was conducted by International Launch Services (ILS), using a Proton-M carrier rocket with a Briz-M upper stage.[3] The launch occurred from Site 200/39 at the Baikonur Cosmodrome, at 11:19:00 UTC on 24 April 2010.[2] The launch successfully placed SES-1 into a subsynchronous orbit close to geostationary altitude.[3][4]

Mission

In May and June 2010, SES-1 was positioned close to 131° West to temporarily provide backup to the AMC-11 satellite in the event that AMC-11 could not continue broadcasting whilst it is moved out of the way of the failed Galaxy 15 satellite, which passed close to it at the end of May 2010.[5] In the end, services provided by AMC-11 were not interrupted.[6]

See also

References

  1. ^ a b Krebs, Gunter. "SES 1, 2, 3". Gunter's Space Page. Retrieved 20 May 2010.
  2. ^ a b McDowell, Jonathan. "Launch Log". Jonathan's Space Page. Retrieved 20 May 2010.
  3. ^ a b c "SES-1 Mission Overview" (PDF). International Launch Services. Retrieved 21 May 2010.
  4. ^ Bergin, Chris (24 April 2010). "ILS Proton-M successfully launches with Orbital-built SES-1 satellite". Nasaspaceflight.com. Retrieved 21 May 2010.
  5. ^ de Selding, Peter B (17 May 2010). "SES Details Plan To Avert Interference by Failed Intelsat Craft". Space News. Retrieved 21 May 2010.
  6. ^ de Selding, Peter B (3 June 2010). "Intelsat, SES Safely Negotiate Passage of Wayward Craft". Space News. Archived from the original on 7 June 2010. Retrieved 7 June 2010.