Lead(II) bromide

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Edgar181 (talk | contribs) at 23:22, 23 September 2019 (link (via WP:JWB)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Lead(II) bromide
Lead(II) bromide
Names
IUPAC name
Lead(II) bromide
Other names
Lead dibromide
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.030.065 Edit this at Wikidata
UNII
  • InChI=1S/2BrH.Pb/h2*1H;/q;;+2/p-2
    Key: ZASWJUOMEGBQCQ-UHFFFAOYSA-L
  • Br[Pb]Br
Properties
PbBr2
Molar mass 367.01 g/mol
Appearance white powder
Density 6.66 g/cm3 [1]
Melting point 370.6 °C (699.1 °F; 643.8 K)
Boiling point 916 °C (1,681 °F; 1,189 K) (vaporizes)
0.455 g/100 mL (0 °C)
0.973 g/100 mL (20 °C)[2]
4.41 g/100 mL (100 °C)
1.86 x 10−5 (20 °C)
Solubility insoluble in alcohol;
soluble in ammonia, alkali, KBr, NaBr
−90.6·10−6 cm3/mol
Hazards
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 0: Will not burn. E.g. waterInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
3
0
0
Related compounds
Other anions
Lead(II) fluoride,
Lead(II) chloride,
Lead(II) iodide
Other cations
Thallium(I) bromide,
Tin(II) bromide
Bismuth bromide
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Lead(II) bromide is the inorganic compound with the formula PbBr2. It is a white powder. It is produced in the burning of typical leaded gasolines.[3]

Preparation and properties

It is typically prepared from treating solutions of lead salts (e.g., (lead(II) nitrate) with bromide salts. This process exploits its low solubility in water - only 0.455 g dissolves in 100 g of water at 0 °C. It is about ten times more soluble in boiling water.[4]

Lead bromide was prevalent in the environment as the result of the use of leaded gasoline. Tetraethyl lead was once widely used to improve the combustion properties of gasoline. To prevent the resulting lead oxides from fouling the engine, gasoline was treated with an organobromine compound that converted lead oxides into the more volatile lead bromide, which was then exhausted from the engine into the environment.[3]

Safety

Like other compounds containing lead, lead dibromide is categorized as probably carcinogenic to humans (Category 2A), by the International Agency for Research on Cancer (IARC). Its release into the environment as a product of leaded gasoline was highly controversial.

References

  1. ^ Lide, David R., ed. (2006). CRC Handbook of Chemistry and Physics (87th ed.). Boca Raton, FL: CRC Press. ISBN 0-8493-0487-3.
  2. ^ NIST-data review 1980
  3. ^ a b Michael J. Dagani, Henry J. Barda, Theodore J. Benya, David C. Sanders "Bromine Compounds" in Ullmann's Encyclopedia of Industrial Chemistry" Wiley-VCH, Weinheim, 2000.doi:10.1002/14356007.a04_405
  4. ^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.