Antimony pentachloride

Antimony pentachloride
Antimony pentachloride
Names
	IUPAC names Antimony pentachloride; Antimony(V) chloride
	Other names Antimonic chloride; Antimony perchloride
Identifiers
CAS Number	7647-18-9 ;
3D model (JSmol)	Interactive image; Interactive image;
ChemSpider	10613049 ;
ECHA InfoCard	100.028.729
EC Number	231-601-8;
PubChem CID	24294;
RTECS number	CC5075000;
CompTox Dashboard (EPA)	DTXSID30893043 ;
	InChI InChI=1S/5ClH.Sb/h51H;/q;;;;;+3/p-5 Key: PZVOXSCNPLCIRA-UHFFFAOYSA-I ; InChI=1/5ClH.Sb.3H/h51H;;;;/q;;;;;+3;;;/p-5/r5ClH.H3Sb/h51H;1H3/q;;;;;+3/p-5 Key: KUGFODPTKMDJNG-MEZDTJOHAL; InChI=1/5ClH.Sb/h51H;/q;;;;;+3/p-5 Key: PZVOXSCNPLCIRA-AACRGIKGAS;
	SMILES [Cl-].[Cl-].[Cl-].[Cl-].[Cl-].[SbH3+3]; [SbH3+3].[Cl-].[Cl-].[Cl-].[Cl-].[Cl-];
Properties
Chemical formula	Cl5Sb
Molar mass	299.01 g·mol−1
Appearance	colorless or reddish-yellow (fuming) liquid, oily
Odor	pungent, offensive
Density	2.336 g/cm3 (20 °C); 2.36 g/cm3 (25 °C)
Melting point	2.8 °C (37.0 °F; 275.9 K)
Boiling point	140 °C (284 °F; 413 K) ; decomposes from 106 °C; 79 °C (174 °F; 352 K); at 22 mmHg; 92 °C (198 °F; 365 K); at 30 mmHg
Solubility in water	reacts
Solubility	soluble in alcohol, HCl, tartaric acid, CHCl3, CS2, CCl4
Solubility in selenium(IV) oxychloride	62.97 g/100 g (25 °C)
Vapor pressure	0.16 kPa (25 °C); 4 kPa (40 °C); 7.7 kPa (100 °C)
Refractive index (nD)	1.59255
Viscosity	2.034 cP (29.4 °C); 1.91 cP (35 °C)
Structure
Molecular shape	Trigonal bipyramidal
Dipole moment	0 D
Thermochemistry
Heat capacity (C)	120.9 J/mol·K (gas)
Std molar; entropy (S⦵298)	295 J/mol·K
Std enthalpy of; formation (ΔfH⦵298)	-437.2 kJ/mol
Gibbs free energy (ΔfG⦵)	-345.35 kJ/mol
Hazards
	Occupational safety and health (OHS/OSH):
Inhalation hazards	Toxic
	GHS labelling:
Pictograms
Signal word	Danger
Hazard statements	H314, H411
Precautionary statements	P273, P280, P305+P351+P338, P310
NFPA 704 (fire diamond)	3 0 1 W
Flash point	77 °C (171 °F; 350 K)
	Lethal dose or concentration (LD, LC):
LD50 (median dose)	1115 mg/kg, (rat, oral)
	NIOSH (US health exposure limits):
PEL (Permissible)	TWA 0.5 mg/m3 (as Sb)
REL (Recommended)	TWA 0.5 mg/m3 (as Sb)
Related compounds
Other anions	Antimony pentafluoride
Other cations	Phosphorus pentachloride
Related compounds	Antimony trichloride
	Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). verify (what is ?) Infobox references

Antimony pentachloride is a chemical compound with the formula SbCl₅. It is a colourless oil, but typical samples are yellowish due to impurities. Owing to its tendency to hydrolyse to hydrochloric acid, SbCl₅ is a highly corrosive substance and carbonizes non-fluorinated plastics.

Preparation and structure

Antimony pentachloride is prepared by passing chlorine gas into molten antimony trichloride:

SbCl₃ + Cl₂ → SbCl₅

Gaseous SbCl₅ has a trigonal prismatic structure.^[6]

Reactions

Antimony pentachloride hydrolyses to give hydrochloric acid and antimony oxychlorides. This reaction is suppressed in the presence of a large excess of chloride, owing to the formation of the hexachloroantimonate complex ion:

SbCl₅ + Cl⁻ → [SbCl₆]⁻

The mono- and tetrahydrates are known, SbCl₅·H₂O SbCl₅·4 H₂O.

This compound forms adducts with many Lewis bases. It is used as the standard Lewis acid in the Gutmann scale of Lewis basicity.^[7]

It is also a strong oxidizing agent.^[8]

Applications

Antimony pentachloride is used as a polymerization catalyst and for the chlorination of organic compounds.

Precautions

Antimony pentachloride is a highly corrosive substance that should be stored away from heat and moisture. It is a chlorinating agent and, in the presence of moisture, it releases hydrogen chloride gas. Because of this, it may etch even stainless-steel tools (such as needles), if handled in a moist atmosphere. It should not be handled with non-fluorinated plastics (such as plastic syringes, plastic septa, or needles with plastic fittings), since it melts and carbonizes plastic materials.

References

^ ^a ^b ^c http://www.inchem.org/documents/ukpids/ukpids/ukpid36.htm
^ ^a ^b ^c ^d ^e Sigma-Aldrich Co., Antimony(V) chloride. Retrieved on 2014-05-29.
^ ^a ^b ^c ^d ^e ^f http://chemister.ru/Database/properties-en.php?dbid=1&id=1979
^ Antimony pentachloride in Linstrom, Peter J.; Mallard, William G. (eds.); NIST Chemistry WebBook, NIST Standard Reference Database Number 69, National Institute of Standards and Technology, Gaithersburg (MD) (retrieved 2014-05-29)
^ ^a ^b NIOSH Pocket Guide to Chemical Hazards. "#0036". National Institute for Occupational Safety and Health (NIOSH).
^ Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.
^ V. Gutmann (1976). "Solvent effects on the reactivities of organometallic compounds". Coord. Chem. Rev. 18 (2): 225. doi:10.1016/S0010-8545(00)82045-7.
^ Connelly, N. G.; Geiger, W. E. (1996). "Chemical Redox Agents for Organometallic Chemistry". Chem. Rev. 96: 877–922. doi:10.1021/cr940053x. PMID 11848774.

Manufacturer and supplier..... Chemical & Metal Industries, Inc. Hudson, CO 80642 (303)-536-9800

External links

This inorganic compound–related article is a stub. You can help Wikipedia by expanding it.

[inchem-1] ttp://www.inchem.org/documents/ukpids/ukpids/ukpid36.htm

[sigma-2] Sigma-Aldrich Co., Antimony(V) chloride. Retrieved on 2014-05-29.

[chemister-3] ^ ^a ^b ^c ^d ^e ^f http://chemister.ru/Database/properties-en.php?dbid=1&id=1979

[nist-4] Antimony pentachloride in Linstrom, Peter J.; Mallard, William G. (eds.); NIST Chemistry WebBook, NIST Standard Reference Database Number 69, National Institute of Standards and Technology, Gaithersburg (MD) (retrieved 2014-05-29)

[PGCH-5] NIOSH Pocket Guide to Chemical Hazards. "#0036". National Institute for Occupational Safety and Health (NIOSH).

[6] Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.

[7] V. Gutmann (1976). "Solvent effects on the reactivities of organometallic compounds". Coord. Chem. Rev. 18 (2): 225. doi:10.1016/S0010-8545(00)82045-7.

[8] Connelly, N. G.; Geiger, W. E. (1996). "Chemical Redox Agents for Organometallic Chemistry". Chem. Rev. 96: 877–922. doi:10.1021/cr940053x. PMID 11848774.

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]