Casio FX-603P

CASIO FX-603P

An FX-603P in working condition
Type	Programmable Scientific
Manufacturer	Casio
Introduced	1990
Calculator
Entry mode	Infix
Precision	12 digits mantissa, ±99 exponent
Display type	LCD Dot-matrix
Display size	2×16 Character
Programming
Programming language(s)	Keystroke (fully merged, Turing complete)
Memory register	110
Program steps	6'144
Interfaces
Ports	one vendor specific
Connects to	Compact Cassette via: FA-6 Line Printer via one of: FA-6 Centronics printer port PC via one of: FA-6 RS-232
Other
Power supply	2×"CR-2032" Lithium + 1×"CR-2032" Lithium
Weight	141g, 5 oz
Dimensions	15.24x7,6x1.2 cm, 6"×3"×½"

The FX-603P was a programmable calculator, manufactured by CASIO from 1990. It was the successor model to the Casio FX-602P. Since it was only released in a limited number of countries in small quantities, it is now an excessively rare item which commands high prices when sold.

Display

The FX-603P featured a two line dot matrix display with 16 characters each as main display. An additional 4 digits 7-segment display used to display the program step when entering or debugging programs and 20 status indicators.

Programming

The programming model employed was key stroke programming by which each key pressed was recorded and later played back. On record multiple key presses were merged into a single programming step. There were only a very few operations which needed two bytes.

The FX-603P could store 6,144 steps. Data could be stored in 110 memory register. The FX-603P series supported 20 labels for programs and subroutines called P0 .. P19 - twice the amount of the predecessor models. Each program or subroutine could have up to 10 local labels called LBL0 .. LBL9 for jumps and branches.

The FX-603P supported indirect addressing both for memory access and jumps and therefore programming model could be considered Turing complete.

The FX-603P was upward compatible to the FX-602P could load FX-602P programs from Compact Cassette.

Programming example

Here is a sample program that computes the factorial of an integer number from 2 to 69. For 5!, you'll type 5 P0 and get the result, 120. With the additional alpha output the program is 14 byte long.

Key-code	Comment
MODE2	Change to mode 2 to enable editing of program areas P0 to P19
P0	From the program list, press P0 button to start editing the program area P0
ALPHAn!=ALPHA	output "n!=" in first row of display. Result will be shown in 2nd line
HLT	waits for user input, user types in number and presses EXE button to continue program
Min00	stores the value typed in by the user in register M00
1	put 1 in current immediate register so there is a value to multiple with
LBL0	label for the loop
*	multiply
MR00	by n
DSZ GOTO0	decrements M00 and back to LBL0 until M00=0
=	end of loop, the machine has calculated $1\times n\times (n-1)\times \cdots \times 2\times 1=n!$

Interface

Casio FA-6

Connects to	Compact Cassette via one of: Line-Out: 3.5 mm TRS connector Mic-In: 3.5 mm TRS connector Tape Start/Stop: 3.5 mm TRS connector Line Printer via: Centronics printer port Personal computer via: RS-232C
Manufacturer	Casio
Type	Multi Interface

The FX-603P used the same FA-6 interface as used by the Casio FX-840P, Casio FX-841P, Casio FX-850P, Casio FX-860P, Casio FX-860Pvc, Casio FX-870P, Casio FX-880P, Casio FX-890P, Casio VX-1, Casio VX-2, Casio VX-3, Casio VX-4, Casio Z-1 and Casio Z-1GR programmable calculator and pocket computers. This interface features a Kansas City standard Compact Cassette interface, a Centronics printer port and a RS-232 interface.

External links

• FX-603P home page with in-depth information.
• Casio FX-603P on Caz Pocket Computers Collection
• FX-603P on RS-Key maintained by Viktor Toth.