This article needs additional citations for verification. (November 2008) (Learn how and when to remove this template message)
In Commonwealth English (excluding Canada), spanner is the standard term. The most common shapes are called open-ended spanner and ring spanner. The term wrench is generally used for tools that turn non-fastening devices (e.g. tap wrench and pipe wrench), or may be used for a monkey wrench - an adjustable pipe wrench.
In North American English, wrench is the standard term. The most common shapes are called open-end wrench and box-end wrench. In American English, spanner refers to a specialised wrench with a series of pins or tabs around the circumference. (These pins or tabs fit into the holes or notches cut into the object to be turned.) In American commerce, such a wrench may be called a spanner wrench to distinguish it from the British sense of spanner.
Hinged tools, such as pliers or tongs, are not generally considered wrenches in English, but exceptions are the plumber wrench (pipe wrench in British English) and Mole wrench (sometimes Mole grips in British English).
The word can also be used in slang to describe an unexpected obstacle, for example, "He threw a spanner in the works" (in U.S. English, "monkey wrench").
Wrenches and applications using wrenches or devices that needed wrenches, such as pipe clamps and suits of armor, have been noted by historians as far back as the 15th century. Adjustable coach wrenches for the odd-sized nuts of wagon wheels were manufactured in England and exported to North America in the late eighteenth and early nineteenth centuries. The mid 19th century began to see patented wrenches which used a screw for narrowing and widening the jaws, including patented monkey wrenches.
Most box end wrenches are sold as 12-point because 12-point wrenches fit over both 12-point and 6-point bolts. 12-point wrenches also offer a higher number of engagement points over 6-point. However, 12-point wrenches have been known to round off 6-point bolts as they provide less contact space.
|American name||British/Commonwealth name||Description||Group|
|open-end wrench||open-ended spanner||A one-piece wrench with a U-shaped opening that grips two opposite faces of the bolt or nut. This wrench is often double-ended, with a different-sized opening at each end. The ends are generally oriented at an angle of around 15 degrees to the longitudinal axis of the handle. This allows a greater range of movement in enclosed spaces by flipping the wrench over.||common|
|box-end wrench||ring spanner||A one-piece wrench with an enclosed opening that grips the faces of the bolt or nut. The recess is generally a six-point or twelve-point opening for use with nuts or bolt heads with a hexagonal shape. The twelve-point fits onto the fastening at twice as many angles, an advantage where swing is limited. Eight-point wrenches are also made for square-shaped nuts and bolt heads. Ring spanners are often double-ended and usually with offset handles to improve access to the nut or bolt.||common|
|combination wrench||combination spanner
|A double-ended tool with one end being like an open-end wrench or open-ended spanner, and the other end being like a box-end wrench or ring spanner. Both ends generally fit the same size of bolt.||common|
flare nut spanner
|A wrench that is used for gripping the nuts on the ends of tubes. It is similar to a box-end wrench but, instead of encircling the nut completely, it has a narrow opening just wide enough to allow the wrench to fit over the tube, and thick jaws to increase the contact area with the nut. This allows for maximum contact on plumbing nuts, which are typically softer metals and therefore more prone to damage from open-ended wrenches.||common|
|ratcheting box wrench||ratcheting ring spanner||A type of ring spanner, or box wrench, whose end section ratchets. Ratcheting can be reversed by flipping over the wrench, or by activating a reversing lever on the wrench. This type of wrench combines compact design of a box wrench, with the utility and quickness of use of a ratchet wrench. A variety of ratcheting mechanisms are used, from simple pawls to more complex captured rollers, with the latter being more compact, smoother, but also more expensive to manufacture. The one pictured also features a drift pin on the tail.||common|
|flex-head socket wrench
|scaffolders spanner||Similar in concept to a socket wrench. A Saltus wrench features a socket permanently affixed to a handle. Sockets are not interchangeable as with a socket wrench. The socket often rotates around the handle to allow the user to access a fastener from a variety of angles. Commonly a Saltus wrench is part of a double-ended wrench, with an open-end type head on the opposite side from the socket head.||common|
|spanner wrench or simply spanner [referring to any of these]; [when specifying pin vs hook vs C, the same terms are used as in British English]||pin spanner
pin face spanner
|A wrench with one or several pins or hooks, designed to drive spanner head screws, threaded collars and retainer rings, shafts, and so on. Note the difference in the American and British senses of the word "spanner". In American English, "spanners" are a subset of the class of tools called "wrenches".||common|
|striking face box wrench
|This is a specialized thick, short, stocky wrench with a block end to the handle specifically designed for use with a hammer, enabling one to impart great force. Used commonly with large fasteners, especially a nut and stud which both have index marks: the nut is screwed hand-tight, then further tightened with the striking wrench a known number of index marks calculated from the elasticity of the bolt or stud, thus giving precise torque (preload). Striking wrenches also provide shock and high force used to release large and/or stuck nuts and bolts; and when space does not allow room for a large wrench.||common|
adjustable end wrench
|The most common type of adjustable wrench in use today. The adjustable end wrench differs from the monkey wrench in that the gripping faces of the jaws are displaced to a (typically) 15 degree angle relative to the tool's handle, a design feature that facilitates the wrench's use in close quarters. The modern adjustable end wrench was invented by Johan Petter Johansson of Bahco. The common use of "Crescent wrench" to describe this design is derived from the Crescent brand, owned by Apex Brands, Inc. Apex Tool Group, LLC.||adjustable|
|self-adjusting wrench||self-adjusting spanner
||With a serrated jaw which is self-tightening.||adjustable|
|monkey wrench||gas grips
|An old type of adjustable wrench with a straight handle and smooth jaws whose gripping faces are perpendicular to the handle.||historical|
|A tool that is similar in design and appearance to a monkey wrench, but with self-tightening properties and hardened, serrated jaws that securely grip soft iron pipe and pipe fittings. Sometimes known by the original patent holder's brand name as a "Stillson wrench".||adjustable|
|socket wrench||socket wrench
|A hollow cylinder that fits over one end of a nut or bolt head. It may include a handle, if it does not then it is often just referred to as a socket and is usually used with various drive tools to make it a wrench or spanner such as a ratchet handle, a tee bar (sliding tommy bar) bar or a knuckle bar (single axis pivot). It generally has a six-point, eight-point or twelve-point recess, may be shallow or deep, and may have a built-in universal joint. (The photo shows both ratchet and sockets.)||socket|
|clamp ratchet wrench||clamp ratchet spanner||An open-ended multi-size ratchet wrench. The ratcheting mechanism allows the nut to be clamped-on or loosened with a reciprocating motion; flip the wrench to change direction of the drive. The wrench takes the advantage of the clamp action to allow multiple sizes in both SAE and metric standards. Each wrench typically will allow up to 3 non-metric sizes and 3 metric sizes.||adjustable|
jointed nut spinner
flex head nut spinner
|This tool is a long non-ratcheting bar that allows the user to impart considerable torque to fasteners, especially in cases where corrosion has resulted in a difficult-to-loosen part.||socket|
|crow's foot||A type of wrench designed to use the same drive sizes as socket wrenches, but non-cylindrical in shape. The ends are the same as those found on the open-end, box-end, or the flare-nut wrenches. These wrenches are used when torque must be measured, or when the application precludes the use of a regular socket or wrench. Also used in place of conventional open/box wrenches where the wrenches are large, usually at a lower cost, or for when space and weight restrictions are critical.||socket|
|ratchet wrench||ratchet handle||It contains a one-way mechanism which allows the socket to be turned without removing it from the nut or bolt simply by cycling the handle backward and forward. (The photo shows both ratchet and sockets.)||socket|
|A crank-shaped handle that drives a socket. The socket-driving analog of the brace used to drive a drill bit. Used instead of a ratchet in a few contexts when it can save substantial time and effort—that is, when there is a lot of turning to be done (many fasteners), ample room to swing the handle, ample access to the fastener heads, etc. Has less leverage than a conventional ratchet wrench. Used occasionally in automotive repair or job shop work.||socket|
|torque wrench||torque wrench||A socket wrench drive tool that is employed to impart a precise amount of torque to a fastener, essential in many cases during the assembly of precision mechanisms.||socket|
|Allen key||A wrench used to turn screw or bolt heads designed with a hexagonal socket (recess) to receive the wrench. The wrenches come in two common forms: L-shaped and T-handles. The L-shaped wrenches are formed from hexagonal wire stock, while the T-handles are the same hex wire stock with a metal or plastic handle attached to the end. There are also indexable-driver-bits that can be used in indexable screwdrivers.||keys|
Bristol spline wrench
|?||Another wrench designed for internal socket-head screws and bolts. The cross-section resembles a square-toothed gear. Not a common design, it is chiefly used on small set screws.||keys|
|Torx wrench||Torx key||An internal socket-head screw design. The cross-section resembles a star. Commonly used in automobiles, automated equipment, and computer components as it is resistant to wrench cam-out and so suitable for use in the types of powered tools used in production-line assembly.||keys|
|alligator wrench||?||A formerly common type of wrench that was popular with mechanics, factory workers, and farmers for maintenance, repair and operations tasks in the days when fasteners often had square rather than hex heads. The wrench's shape suggests the open mouth of an alligator.||historical|
|cone wrench||cone spanner||A thin open-end wrench used to fit narrow wrench flats of adjustable bearing bicycle hubs. Called a "cone" wrench because it fits wrench flats of the cone section of a "cup and cone" hub, this tool is also used with some other adjustable hub bearings. The wrench is very thin so has little strength; to compensate, cone wrenches typically have a large head. Most bicycle front hubs use a 13 mm; most rears use 15 mm.||specialty|
|A double-handled wrench for turning the dies used in threading operations (cutting the male threads such as on a bolt).||specialty|
|drum key||A small, square-head socket wrench used on drum (percussion musical instrument) tuning lugs and fasteners. This key is often interchangeable with radiator bleed keys.||specialty|
|Shower Valve Socket Wrench||box spanner
spark plug spanner
|A tube with six-sided sockets on both ends. It is turned with a short length of rod (tommy bar or T bar) inserted through two holes in the middle of the tube.||common|
|?||A tool commonly used to open bungs on large 55-gallon drums (cylindrical containers).||specialty|
|fire hydrant wrench (hose connection)||?||The hose connection has a threaded collar with a protruding pin. From the handle of the wrench an arc has at its end a loop to engage the pin.||specialty|
|fire hydrant wrench (valve operator)||?||This is a pentagonal (five-sided) box wrench. The unusual shape of the lug makes the valve tamper-resistant: with the opposite faces nonparallel, unauthorized opening of the hydrant is more difficult without a suitable tool.||specialty|
|curb key||Toby key||This is a wrench for opening and closing valves on municipal water pipes (often at the curb, hence the name). The valve usually has a rectangular lug and is set deep into the ground, requiring the key.||specialty|
|golf shoe spike wrench||?||A T-handle wrench with two pins and clearance for the spike—allows removal and insertion of spikes in shoes.||specialty|
|head nut wrench||?||A flat wrench with a circular hole and two inward protruding pins to engage slots in the nut. This type of nut is used on bicycles to secure the front fork pivot bearing to the headpiece of the frame.||specialty|
|4-way lug wrench
wheel lug cross wrench
cross rim wrench
|A socket wrench used to turn lug nuts on automobile wheels.||specialty|
|oil-filter wrench||oil filter wrench
|A type of wrench for removing cylindrical oil filters. It may be either a strap-type wrench or a socket.||specialty|
|A tool to screw (rotate with force) various pipes during plumbing.||specialty|
|?||rigger-jigger||A spanner can be used in attaching riggers to rowing boats with offset to allow users fingers to keep grip when flush with boat. 10 mm at one end, 13 mm at the other.||specialty|
|basin wrench||A self-tightening wrench mounted at the end of a shaft with a transverse handle at the opposite end. Used to tighten or loosen fasteners located in recesses.||specialty|
|dogbone wrench||dumbbell spanner||A compact spanner for multiple sizes, usually used for bicycles||specialty|
|spoke wrench||nipple wrench
|A wrench with a clearance slot for a wire wheel spoke such as a bicycle wheel and a drive head for the adjustment nipple nut. The handle is offset to make the wrench more convenient to grip, and the handle is short to fit between spokes, allowing the wrench to turn 360 degrees without being removed.||specialty|
|spud wrench||podging spanner
|A steel erecting tool which consists of a normal wrench at one end and a spike (drift pin) at the other, used for lining up bolt holes (typically when mating two pipe flanges).||specialty|
|chain whip||A self-tightening wrench that engages the teeth of a chain drive sprocket, and used typically to remove bicycle cogsets. Similar to a strap wrench, but uses positive engagement rather than friction, and so needs to grab only one end of the chain.||specialty|
|A self-tightening wrench with either a chain or strap of metal, leather, or rubber attached to a handle, used to grip and turn smooth cylindrical objects (such as automotive oil filters). It relies entirely on friction between the strap or chain and the object to be manipulated. Similar to a pipe wrench, but uses a chain similar to a drive chain or strap, instead of an adjustable jaw. The links of the chain have extended pegs which fit into grooves in the front of the handle, with one end of the chain attached permanently to the handle. This is used in situations where pipe wrenches cannot maintain a proper grip on an object such as a wet or oily pipe. Larger versions of chain wrenches are sometimes known as "bull tongs" and are used with large diameter pipe such as is used deep wells.||specialty|
|tap wrench||A double-handled wrench for turning the square drive on taps used in threading operations (cutting the female threads such as within a nut) or a precision reamer.||specialty|
|tappet wrench||?||A spanner of small to moderate size constructed similarly to an open ended wrench, but with a thinner cross section. Its purpose is to apply torque to the fasteners found on the valve trains of older engines, especially automobile engines, where the valve train required adjustment of the tappets (also known as lifters). Tappets, push rods, rocker arms and similar adjustable pieces are often equipped with locknuts which are thinner than standard nuts, due to space limitations. Frequently, the hex section of the adjustment is contiguous to the lock nut, thus requiring a thinner "tappet wrench" to be used.||specialty|
|tuning wrench||tuning "T" hammer
piano tuning lever
|A socket wrench used to tune some stringed musical instruments. Similar, and in some cases identical to drum tuning keys, but often provide greater torque due to the higher tension of strings.||specialty|
|wing nut wrench||A tool specifically for use with wing nuts, allowing the application of greater torque than is possible by hand. It is generally advised[by whom?] not to use such spanners for tightening the wing nut, but rather only for loosening. It is a "hand saver" more than anything else.||specialty|
|graduated wrench||?||An adjustable wrench with a small number (usually 2–4) of discrete sizes. This is sometimes used as an inexpensive substitute for a monkey wrench.|
|power wrench||?||A broad type of wrenches that use electricity or compressed air to power the wrench.||power|
|A powered wrench which delivers quick, repeated impulses of torque. Typically powered by air, but can also be electric. Most people have heard its familiar rap-rap-rap noise while being used in an auto repair shop. Although many professionals use them to tighten lug nuts on vehicle wheels, do-it-yourselfers should use a torque wrench since an impact wrench can often over-torque and damage the threads on lug nuts and wheel studs. Impact wrenches are great for loosening stubborn, difficult-to-remove nuts and bolts.||power|
Other types of keys
These types of keys are not emically classified as wrenches by English speakers, but they are etically similar in function to wrenches.
|American name||British/Commonwealth name||Description||Group|
|chuck key||chuck key||A key used to tighten or loosen a chuck.||household/industrial|
|church key, bottle opener||church key, bottle opener||A key used to remove bottle caps or to pierce can lids.||household|
|paint can key||?||A key used to open the lids of paint cans. Its upturned edge helps to apply a levering motion to the crimped lip of the can lid.||household|
|sillcock key||sillcock key, loose key, tap key||A key used to open or close sillcock valves. Many are designed the same way as a spider-type lug wrench, with four common sizes (one on each end) built into one portable tool.||household|
|window crank||window crank||A socket-like key slipped over the splined shaft that operates the opening and closing of some types of window.||household|
|sardine can key||sardine tin key||A key used in opening the lids of canned fish or canned meat. A tab on the metal lid fits into the slot in the shaft of the key and the lid is wound onto the key, tearing it away from the can.||household|
|dental key||dental key||A key formerly used in dentistry for leverage in pulling teeth||historical|
Size is usually designated by dimensions such as across-flats distance (inscribed-hexagon size). In the 19th and early 20th centuries, it had been common to define the nominal size of the wrench according to the nominal size of the screw thread that it was meant to be used with. Modern practice uses a size designation based on across-flats distance, whether measured in metric or in inch units.
- "AskOxford". Archived from the original on 2004-10-18. Retrieved 2010-04-20.
- Henry C. Mercer, Ancient Carpenters' Tools: Illustrated and Explained, Together with the Implements of the Lumberman, Joiner and Cabinet-Maker, 1928, reprint Courier Corporation - 2013, pages 271-272
- "Undoing stripped nuts with 6 point wrenches". rtstools.com. Archived from the original on 2017-09-30. Retrieved 2017-09-30.
- "Archived copy". Archived from the original on 2016-11-05. Retrieved 2016-11-11.CS1 maint: Archived copy as title (link)
- "McMaster-Carr Catalog". www.mcmaster.com. McMaster-Carr. Archived from the original on October 9, 2016. Retrieved October 10, 2016.
- "Drill Chuck Keys & Keyleashes". Retrieved 13 April 2016.
- "World Wide Words: Church key". World Wide Words. Archived from the original on 6 May 2018. Retrieved 13 April 2016.
- The dictionary definition of Wrench at Wiktionary
- Media related to Wrench at Wikimedia Commons
- Spanner Jaw Sizes Additional background information and spanner jaw size table.
- Conversion chart Whitworth/BSF/AF and metric spanner and thread sizes