Cruciform tail - Wikipedia

British Aerospace Jetstream 31 with cruciform tail

Avro Canada CF-100 Canuck showing its cruciform design tail

The cruciform tail is an aircraft empennage configuration which, when viewed from the aircraft's front or rear, looks much like a cross. The usual arrangement is to have the horizontal stabilizer intersect the vertical tail somewhere near the middle, and above the top of the fuselage. The design is often used to locate the horizontal stabilizer away from jet exhaust, propeller and wing wake, as well as to provide undisturbed airflow to the rudder.^[1]

Applications

References

Notes

^ A cruciform tail was used on the XF2D-1, F2H-1, F2H-2, F2H-2B, F2H-2N, and F2H-2P Banshee variants. The later F2H-3 and F2H-4 used a conventional tail.

References

^ What-when-how. "Tail designs". what-when-how.com. Retrieved 8 April 2018.

v t e Aircraft components and systems
Airframe structure	Aft pressure bulkhead Cabane strut Canopy Crack arrestor Cruciform tail Dope Empennage Fabric covering Fairing Flying wires Former Fuselage Hardpoint Interplane strut Jury strut Leading edge Lift strut Longeron Nacelle Rib Spar Stabilizer Stressed skin Strut T-tail Tailplane Trailing edge Triple tail Twin tail V-tail Vertical stabilizer Wing root Wing tip Wingbox
Flight controls	Aileron Airbrake Artificial feel Autopilot Canard Centre stick Deceleron Dive brake Dual control Electro-hydraulic actuator Elevator Elevon Flaperon Flight control modes Fly-by-wire Gust lock HOTAS Rudder Rudder pedals Servo tab Side-stick Spoiler Spoileron Stabilator Stick pusher Stick shaker Trim tab Wing warping Yaw damper Yoke
Aerodynamic and high-lift devices	Active Aeroelastic Wing Adaptive compliant wing Anti-shock body Blown flap Channel wing Dog-tooth Drag-reducing aerospike Flap Gouge flap Gurney flap Krueger flap Leading-edge cuff Leading-edge droop flap LEX Slats Slot Stall strips Strake Variable-sweep wing Vortex generator Vortilon Wing fence Winglet
Avionic and flight instrument systems	ACAS Air data boom Air data computer Aircraft periscope Airspeed indicator Altimeter Annunciator panel Astrodome Attitude indicator Compass Course deviation indicator EFIS EICAS Flight management system Glass cockpit GPS Head-up display Heading indicator Horizontal situation indicator INS ISIS Multi-function display Pitot–static system Radar altimeter TCAS Transponder Turn and slip indicator Variometer Yaw string
Propulsion controls, devices and fuel systems	Autothrottle Drop tank FADEC Fuel tank Gascolator Inlet cone Intake ramp NACA cowling NACA duct Self-sealing fuel tank Splitter plate Throttle Thrust lever Thrust reversal Townend ring War emergency power Wet wing
Landing and arresting gear	Aircraft tire Arrestor hook Autobrake Conventional landing gear Drogue parachute Landing gear Landing gear extender Oleo strut Tricycle landing gear Tundra tire
Escape systems	Ejection seat Escape crew capsule
Other systems	Aircraft lavatory Auxiliary power unit Bleed air system Deicing boot Emergency oxygen system Environmental control system Flight recorder Hydraulic system Ice protection system In-flight entertainment system Landing lights Navigation light Passenger service unit Ram air turbine

Applications

See also

References

Notes

References