Jump to content

Honda CBR900RR

From Wikipedia, the free encyclopedia
Honda CBR900RR
1992 CBR900RR
ManufacturerHonda
Also calledFireBlade
Production1992-2003
SuccessorCBR1000RR
ClassSport bike
RelatedHonda CBR600RR
Honda CBR1000RR
Honda CB900F

The Honda CBR900RR, or FireBlade in some countries, is a 900 cc (55 cu in) sport bike, part of the CBR series introduced in 1992 by Honda. It was the first of a series of large-displacement Honda models to carry the RR suffix. The development of the first generation CBR900RR was led by Tadao Baba.

History

[edit]

CBR900RR (893cc) SC28

[edit]

The first generation CBR900RR was introduced in 1992 with an 893 cc (54.5 cu in) inline-four engine. It set a precedent for lightweight in the superbike class, being much lighter than other large-displacement bikes of the time. The CBR900RR was based on an advanced research stage model known within Honda as the "CBR750RR". With the objective of equaling the acceleration of competitors’ flagship sport bikes, Honda increased the stroke of its inline 4-cylinder 750 cc engine and thus raised displacement to 893cc. Complementing its power performance was the bike's dry weight of just 185 kg, wheelbase of 1,405 mm, and a body almost identical to that of the advanced research stage model. At 205 kg (453 lb) wet weight, it was by just 1.8 kg (4 lb) heavier than the CBR600F2, while the next-lightest over-750cc machine, the Yamaha FZR1000, was heavier by 34 kg (76 lb).

Changes for the 1994 model comprise a new shift-drum to improve notchy gear shifts. The second-generation CBR900RR, which debuted in 1995,[1] incorporated changes in damping rates and spring rates. The front fork was upgraded with a compression adjuster. The upper cowl stay went from steel to aluminum, and the cylinder head cover went from aluminum to magnesium. The styling of the bike also became more aggressive: The independent dual lights became irregular-shaped multi-reflector lights known as "fox eyes" [2]set further back and covered to improve aerodynamics, and the bike had fewer of the RR's unique fairing "speed" holes. The footpegs were firmer and slimmer like that of the RC45 and the reversed pedal on the original was replaced with a shift linkage. Instead of measuring speed from the front wheel, the speed is measured from the countershaft sprocket with an electronic speedometer.

Honda CBR 919 RR SC33 with the Original "Foxeye" Headlights

CBR900RR (919cc) SC33

[edit]

1996 brought major changes to the CBR900RR with the third generation CBR900RR. To optimize rigidity Honda revised the suspension and chassis. Larger thinner-walled extrusions for more torsional rigidity were used in the swingarm and frame, revised shock and fork internals, and 5 mm (0.2 in) raised swingarm pivot. The handlebars were raised by 10 mm (0.4 in) and swept back by five degrees to improve the riding position. A 1 mm (0.04 in) bore increase raised the engine displacement to 919 cc (56.1 cu in). Other revisions included a smaller alternator, the addition of a throttle position sensor, extra clutch plates, and a larger exhaust.

The only changes for the 1997 model were graphics and colour options.

In 1998, Honda continued subtle refinements in the fourth generation CBR900RR's chassis. It got a stiffer frame more like the original, offset on the triple clamp reduced by 5 mm (0.2 in). It received a redesigned fairing, a new dual-reflector headlight design, new windscreen, mirrors, and rear cowl. The brakes got larger rotors on the front and new calipers and ergonomics were revised with raised footpegs. The engine got revised with 80 percent new internals in an effort to reduce friction and weight. Cylinders bore got an aluminum composites treatment and new pistons. A new instrument cluster includes an LCD tachometer and speedometer, and LCD readouts for temperature, odometer and two tripmeters. It also got a larger radiator and a new exhaust header in stainless steel.

2000 CBR929RR

CBR929RR (929cc) SC44

[edit]

The fifth-generation CBR900RR, or CBR929RR in North America, was introduced in 2000. It has a completely new 929 cc (56.7 cu in) engine, more oversquare with lighter internals. The engine also featured fuel injection and larger valves set at a narrower angle. A new all-titanium exhaust system equipped with HTEV was incorporated. The swingarm is mounted to the engine with bracing under the engine. Larger front disk rotors 330 mm mounted were also fitted and the wheel diameter was increased from 16 inches to 17 inches. The new front fork now used upside-down construction.

2002 CBR954RR

CBR954RR (954cc) SC50

[edit]

The sixth generation CBR900RR, or CBR954RR in North America and Japan, was introduced in 2002. The cylinder bore was enlarged from 74 to 75 mm (2.9 to 3.0 in), increasing capacity to 954 cc (58.2 cu in). Larger fuel injectors, larger radiator, re-mapped electronic fuel injection, and a more powerful ECU were added. The restyled bodywork and fairings gave a sleeker look. The frame as well as the swingarm were strengthened, and the footpegs raised to allow for greater lean angles. Front disc size increased to 330 mm. Dry weight was reduced to 168 kg (370 lb) and the wet weight to 195 kg (430 lb). Power at the rear wheel is 135.8 hp (101.3 kW) and 70.9 lb⋅ft (96.1 N⋅m) torque.[3][4]

John McGuinness won the Macau Grand Prix in 2001 riding a CBR954RR.

Successor

[edit]

The CBR900RR was replaced by the CBR1000RR in 2004.

Specifications

[edit]

All specifications are manufacturer claimed unless specified.

Model CBR900RR (SC28) 1st gen CBR900RR (SC28) 2nd gen CBR919RR (SC33) 3rd & 4th gen CBR929RR (SC44) 5th gen CBR954RR (SC50) 6th gen
Years 1992–1993 1994–1995 1996-1997&1998-1999 2000–2001 2002–2003
Engine displacement 893 cc (54.5 cu in) 919 cc (56.1 cu in) 929 cc (56.7 cu in) 954 cc (58.2 cu in)
Engine type Inline-4
Stroke 4
Compression 11:1 11.1:1 11.3:1 11.5:1
Bore x stroke 70.0 mm × 58.0 mm (2.76 in × 2.28 in) 71.0 mm × 58.0 mm (2.80 in × 2.28 in) 74.0 mm × 54.0 mm (2.91 in × 2.13 in) 75.0 mm × 54.0 mm (2.95 in × 2.13 in)
Fuel control 4x Keihin CV carbs 4x 38 mm Keihin CV carbs PGM-FI (Fuel Injection) w/ Automatic Choke
Cooling system Liquid Cooling
Gearbox 6-speed constant-mesh sequential manual
Final drive chain #525 O-Ring Sealed Chain #530 O-Ring Sealed Chain
Dry weight 180 kg (400 lb) 172 kg (379 lb) 168 kg (370 lb)
Seat height 810 mm (32 in) 815 mm (32.1 in) 815 mm (32.1 in)
Wheelbase 1,405 mm (55.3 in) 1,390 mm (54.9 in) 1,400 mm (55.1 in)
Front suspension travel 120 mm (4.7 in)
Rear suspension travel 120 mm (4.7 in) 130 mm (5.1 in)
Front tyre 130/70-ZR16 120/70-ZR17
Rear tyre 180/55-ZR17 190/50-ZR17
Front brakes Dual disc, 296 mm (11.7 in) Dual disc, 298 mm (11.7 in) (96-97)
310 mm (12 in) (98-99)
Dual disc, 330 mm (13 in)
Rear brakes Single disc, 220 mm (8.7 in)
Fuel capacity 18 L (4.0 imp gal; 4.8 US gal) with 2 L (0.44 imp gal; 0.53 US gal) reserve 18 L (4.0 imp gal; 4.8 US gal) with 3.4 L (0.75 imp gal; 0.90 US gal) reserve
Performance[verification needed]
Max. Power Output (at the crankshaft) 121.0 hp (90 kW) @ 10,500 rpm 122.0 hp (91 kW) @ 10,500 rpm[5] 130.0 hp (97 kW) @ 10,500 rpm[6] 152.0 hp (113 kW) @ 11,500 rpm[7] 154.0 hp (115 kW) @ 11,250 rpm[8]

References

[edit]
  1. ^ 20 Years of Evolution. Timeline, CBR900/CBR1000 Honda Worldwide, Retrieved June 3, 2016
  2. ^ [1],HONDA Fireblade history page ; scroll to 1994 to see 'foxeye' headlights mentioned.
  3. ^ Kunitsugu, Kent (February 2, 2009). "Sharpened Scalpel: Honda CBR954RR road test". Sport Rider. Archived from the original on December 29, 2014. Retrieved March 15, 2016.
  4. ^ Canet, Don (March 23, 2017). "CW Archives: Honda CBR954RR vs. Suzuki GSX-R1000 vs. Yamaha YZF-R1 - Comparison TEST". Cycle World. Retrieved 2021-08-30.
  5. ^ Motor Cycle News (UK weekly newspaper) 23 March 1994, pp.48-49 The Price of Power (TTS tuning), Richard Fincher. Accessed and added 2015-10-12
  6. ^ CBR919RR Specifications motorsports-network.com
  7. ^ CBR929RR Specifications motorsports-network.com
  8. ^ CBR954RR Specifications motorsports-network.com
[edit]