Jump to content

Jyutping

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Yobot (talk | contribs) at 09:05, 10 April 2016 (WP:CHECKWIKI error fixes using AWB (12000)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Jyutping
Jyutping Romanization.
Traditional Chinese粵拼
Simplified Chinese粤拼
Transcriptions
Standard Mandarin
Hanyu PinyinYuèpīn
Yue: Cantonese
Yale Romanizationyuht ping
Jyutpingjyut6 ping3

Template:ChineseText

This article contains phonetic transcriptions in the International Phonetic Alphabet (IPA). For an introductory guide on IPA symbols, see Help:IPA. For the distinction between [ ], / / and ⟨ ⟩, see IPA § Brackets and transcription delimiters.

Jyutping (Chinese: 粵拼; Jyutping: jyut6 ping3; Cantonese pronunciation: [jyːt̚˨ pʰɪŋ˧]) is a romanisation system for Cantonese developed by the Linguistic Society of Hong Kong (LSHK), an academic group, in 1993. Its formal name is The Linguistic Society of Hong Kong Cantonese Romanisation Scheme. The LSHK promotes the use of this romanisation system.

The name Jyutping (itself the Jyutping romanisation of its Chinese name, 粵拼) is a contraction consisting of the first Chinese characters of the terms jyut6 jyu5 (粵語, meaning "Cantonese speech") and ping3 jam1 (拼音 "phonetic alphabet").

Transliteration of Chinese
Mandarin
Modern Standard Mandarin
Late imperial Mandarin
Sichuanese
Wu
General Wu
Wenzhounese
Yue
Cantonese
Min
Hokkien
Teochew
Fuzhounese
Northern Min
Pu-Xian Min
Hainanese
Shao–Jiang Min
Gan
Chang-Du
Hakka
Meixian
Sixian
Xiang
Chang–Yi
Polylectal
General Chinese
See also
Other transliterations
By place

History

The Jyutping system[1] marks a departure from all previous Cantonese romanisation systems (approximately, 12 including Robert Morrison's pioneering work of 1828, and the widely used Standard Romanization, Yale and Sidney Lau systems) by introducing z and c initials and the use of eo and oe in finals, as well as replacing the initial y, used in all previous systems, with j.[2]

Initials

b
/p/
巴 		p
/pʰ/
怕 		m
/m/
媽 		f
/f/
花
d
/t/
打 		t
/tʰ/
他 		n
/n/
那 		l
/l/
啦
g
/k/
家 		k
/kʰ/
卡 		ng
/ŋ/
牙 		h
/h/
蝦
gw
/kʷ/
瓜 		kw
/kʷʰ/
誇 		w
/w/
蛙
z
/ts/
渣 		c
/tsʰ/
叉 		s
/s/
沙 		j
/j/
也

Finals

aa
/aː/
沙 		aai
/aːi/
徙 		aau
/aːu/
梢 		aam
/aːm/
三 		aan
/aːn/
山 		aang
/aːŋ/
坑 		aap
/aːp/
圾 		aat
/aːt/
剎 		aak
/aːk/
客
  ai
/ɐi/
西 		au
/ɐu/
收 		am
/ɐm/
心 		an
/ɐn/
新 		ang
/ɐŋ/
笙 		ap
/ɐp/
濕 		at
/ɐt/
失 		ak
/ɐk/
塞
e
/ɛː/
些 		ei
/ei/
四 		eu
/ɛːu/
掉[1] 		em
/ɛːm/
舐[2] 		  eng
/ɛːŋ/
鄭 		ep
/ɛːp/
夾[3] 		  ek
/ɛːk/
石
i
/iː/
詩 		  iu
/iːu/
消 		im
/iːm/
閃 		in
/iːn/
先 		ing
/ɪŋ/
星 		ip
/iːp/
攝 		it
/iːt/
洩 		ik
/ɪk/
識
o
/ɔː/
疏 		oi
/ɔːi/
開 		ou
/ou/
蘇 		  on
/ɔːn/
看 		ong
/ɔːŋ/
康 		  ot
/ɔːt/
喝 		ok
/ɔːk/
索
u
/uː/
夫 		ui
/uːi/
灰 		    un
/uːn/
寬 		ung
/ʊŋ/
鬆 		  ut
/uːt/
闊 		uk
/ʊk/
叔
oe
/œː/
鋸 		eoi
/ɵy/
需 		    eon
/ɵn/
詢 		oeng
/œːŋ/
商 		  eot
/ɵt/
摔 		oek
/œːk/
削
yu
/yː/
書 		      yun
/yːn/
孫 		    yut
/yːt/
雪 		 
      m
/m̩/
唔 		  ng
/ŋ̩/
吳 		     
  • Only the finals m and ng can be used as standalone nasal syllables.
  • ^ ^ ^ Referring to the colloquial pronunciation of these words.

Tones

There are nine tones in six distinct tone contours in Cantonese. However, as three of the nine are entering tones (入聲, Jyutping: jap6 sing1), which only appear in syllables ending with p, t, and k, they do not have separate tone numbers in Jyutping (though they do in Cantonese Pinyin; these are shown in parentheses in the table below).

Tone name jam1 ping4
(陰平)		 jam1 soeng5
(陰上)		 jam1 heoi3
(陰去) 		joeng4 ping4
(陽平)		 joeng4 soeng5
(陽上)		 joeng4 heoi3
(陽去) 		gou1 jam1 jap6
(高陰入)		 dai1 jam1 jap6
(低陰入)		 joeng4 jap6
(陽入)
Tone Number 1 2 3 4 5 6 1 (7) 3 (8) 6 (9)
The tone name in English high level or high falling mid rising mid level low falling low rising low level entering high level entering mid level entering low level
Contour[3] ˥ 55 / ˥˧ 53 ˧˥ 35 ˧ 33 ˨˩ 21 / ˩ 11 ˩˧ 13 ˨ 22 ˥ 5 ˧ 3 ˨ 2
Character Example 分 粉 訓 焚 奮 份 忽 發 佛
Example fan1 fan2 fan3 fan4 fan5 fan6 fat1 faat3 fat6

Comparison with Yale romanisation

Jyutping and the Yale Romanisation of Cantonese represent Cantonese pronunciations with the same letters in:

  • The initials: b, p, m, f, d, t, n, l, g, k, ng, h, s, gw, kw, w.
  • The vowel: aa (except when used alone), a, e, i, o, u, yu.
  • The nasal stop: m, ng.
  • The coda: i, u, m, n, ng, p, t, k.

But they differ in the following:

  • The vowels eo and oe represent /ɵ/ and /œː/ respectively in Jyutping, whereas the eu represents both vowels in Yale.
  • The initial j represents /j/ in Jyutping whereas y is used instead in Yale.
  • The initial z represents /ts/ in Jyutping whereas j is used instead in Yale.
  • The initial c represents /tsʰ/ in Jyutping whereas ch is used instead in Yale.
  • In Jyutping, if no consonant precedes the vowel yu, then the initial j is appended before the vowel. In Yale, the corresponding initial y is never appended before yu under any circumstances.
  • Jyutping defines three finals not in Yale: eu /ɛːu/, em /ɛːm/, and ep /ɛːp/. These three finals are used in colloquial Cantonese words, such as deu6 (掉), lem2 (舐), and gep6 (夾).
  • To represent tones, only tone numbers are used in Jyutping whereas Yale traditionally uses tone marks together with the letter h (though tone numbers can be used in Yale as well).

Comparison with Cantonese pinyin

Jyutping and Cantonese Pinyin represent Cantonese pronunciations with the same letters in:

  • The initials: b, p, m, f, d, t, n, l, g, k, ng, h, s, gw, kw, j, w.
  • The vowel: aa, a, e, i, o, u.
  • The nasal stop: m, ng.
  • The coda: i (except for its use in the coda /y/ in Jyutping; see below), u, m, n, ng, p, t, k.

But they have some differences:

  • The vowel oe represents both /ɵ/ and /œː/ in Cantonese Pinyin whereas eo and oe represent /ɵ/ and /œː/ respectively in Jyutping.
  • The vowel y represents /y/ in Cantonese Pinyin whereas both yu (used in the nucleus) and i (used in the coda of the final -eoi) are used in Jyutping.
  • The initial dz represents /ts/ in Cantonese Pinyin whereas z is used instead in Jyutping.
  • The initial ts represents /tsʰ/ in Cantonese Pinyin whereas c is used instead in Jyutping.
  • To represent tones, the numbers 1 to 9 are usually used in Cantonese Pinyin, although the use of 1, 3, 6 to replace 7, 8, 9 for the checked tones is acceptable. However, only the numbers 1 to 6 are used in Jyutping.

Examples

Traditional Simplified Romanization
廣州話 广州话 gwong2 zau1 waa2
粵語 粤语 jyut6 jyu5
你好 你好 nei5 hou2

Sample transcription of one of the 300 Tang Poems:

春曉
孟浩然		 Ceon1 Hiu2
Maang6 Hou6 Jin4
春眠不覺曉， Ceon1 min4 bat1 gok3 hiu2,
處處聞啼鳥。 cyu3 cyu3 man4 tai4 niu5.
夜來風雨聲， Je6 loi4 fung1 jyu5 sing1,
花落知多少？ faa1 lok6 zi1 do1 siu2?

Jyutping input method

The Jyutping method (Chinese: 粵拼輸入法) refers to a family of input methods based on the Jyutping romanization system.

The Jyutping method allows a user to input Chinese characters by entering the jyutping of a Chinese character (with or without tone, depending on the system) and then presenting the user with a list of possible characters with that pronunciation.

List of Jyutping keyboard input utilities

See also

Footnotes

  1. ^ "The Jyutping Scheme". The Linguistic Society of Hong Kong. Retrieved 3 January 2016.
  2. ^ Kataoka, Shin; Lee, Cream (2008). "A System without a System: Cantonese Romanization Used in Hong Kong Place and Personal Names". Hong Kong Journal of Applied Linguistics: 94–98.
  3. ^ MATTHEWS, S.; YIP, V. Cantonese: A Comprehensive Grammar; London: Routledge, 1994
Retrieved from "https://en.wikipedia.org/w/index.php?title=Jyutping&oldid=714527348"