Jump to content

LT&SR 1 Class

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Trappist the monk (talk | contribs) at 01:26, 7 January 2016 (cleanup extra text in page/pages/at parameters; convert some cite journal to cite magazine or news; using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

LT&SR 1 class
Type and origin
Power typeSteam
DesignerThomas Whitelegg
BuilderSharp, Stewart & Co.,
Nasmyth, Wilson & Co.
Build date1880–1892
Total produced36
Specifications
Configuration:
 • Whyte4-4-2T
 • UIC2′B1 n2t
Gauge4 ft 8+12 in (1,435 mm)
Leading dia.940 mm (3.084 ft)
Driver dia.6 ft 0 in (1.829 m)
Trailing dia.940 mm (3.084 ft)
Wheelbase8,940 mm (29.331 ft)
Length11,200 mm (36.745 ft)
Height3,996 mm (13.110 ft)
Adhesive weight32.7 tonnes (32.2 long tons; 36.0 short tons)
Loco weight58.60 long tons (59.54 t)
Fuel typeCoal
Fuel capacity2.0 tonnes (2.0 long tons; 2.2 short tons)
Water cap.5.9 tonnes (5.8 long tons; 6.5 short tons)
Firebox:
 • Grate area17 square feet (1.6 m2)
Boiler pressure160 psi (1.10 MPa)
Heating surface:
 • Tubes85.5 m2 (920 sq ft)
 • Total surface1,020 square feet (95 m2)
CylindersTwo, outside
Cylinder size17 in × 26 in (432 mm × 660 mm)
Valve gearStephenson
Performance figures
Tractive effort13,998 lbf (62.3 kN)
Career
Operators
Power classMR/LMS/BR: 1P
Number in class1 January 1923: 36
1 January 1948: 0
Nicknames"Tilbury tank"
Withdrawn1929–1936
DispositionAll scrapped

The London, Tilbury and Southend Railway 1 class was a class of 4-4-2T suburban tank engines. Thirty-six were built between 1880–1892, by Sharp, Stewart and Company and Nasmyth, Wilson and Company. They were the first locomotives owned by the LTSR, as previously all train services had been run by the Great Eastern Railway (GER) under contract.

They were ostensibly designed by Thomas Whitelegg and were the first 4-4-2T locomotives to operate in Britain.[1] However, documentation exists to suggest that the design was actually by William Adams, then working for the GER.[2] A member of this class was recorded as having hauled a train of 240t at an average of 82.2 km/h to Southend with water taken during runs.[3]

Numbering

On the LTSR they were numbered 1–36 and named for places on or near their railway line. In 1912, the LTSR was absorbed by the Midland Railway and the locomotives were renumbered 2110–2145 and the names removed. At the grouping in 1923, all passed to the London, Midland and Scottish Railway and at first retained their former MR numbers. However between 1923 and 1927 twenty-five were progressively renumbered—2110–2119 to 2200–2209 in 1923, 2120–2124 to 2210–2214 in 1925, and 2125–2134 to 2190–2199. In 1930, all 36 were renumbered in the 2056–2091 range.

Retirements started in 1929, and by 1936, all had been withdrawn. None were preserved.

Fleet details

References

  1. ^ Flint, Steve, ed. (December 2008). "LTSR tank locos". Railway Modeller. Beer, Seaton, Devon: Peco Publications & Publicity Ltd. p. 882.
  2. ^ Bradley, D.L. (1967). Locomotives of the London and South Western Railway. Part 2. Railway Correspondence and Travel Society. p. 19.
  3. ^ http://anno.onb.ac.at/cgi-content/anno-plus?aid=lok&datum=1914&page=9&size=45
  • Casserley, H.C.; S.W. Johnston (1974) [1966]. Locomotives at the Grouping 3: London, Midland and Scottish Railway. Shepperton, Surrey: Ian Allan Limited. p. 40. ISBN 0-7110-0554-0.

External links