This article needs additional citations for verification. (September 2013) (Learn how and when to remove this template message)
The saddle is a supportive structure for a rider or other load, fastened to an animal's back by a girth. The most common type is the equestrian saddle designed for a horse. However, specialized saddles have been created for camels and other creatures. It is not known precisely when riders first began to use some sort of padding or protection, but a blanket attached by some form of surcingle or girth was probably the first "saddle," followed later by more elaborate padded designs. The solid saddle tree was a later invention, and though early stirrup designs predated the invention of the solid tree, the paired stirrup, which attached to the tree, was the last element of the saddle to reach the basic form that is still used today. Today, modern saddles come in a wide variety of styles, each designed for a specific equestrianism discipline, and require careful fit to both the rider and the horse. Proper saddle care can extend the useful life of a saddle, often for decades.
- 1 Etymology
- 2 Parts of an equestrian saddle
- 3 History and development
- 4 Types of modern equestrian saddle
- 5 Fitting
- 6 Care of a saddle
- 7 Treeless saddle controversy
- 8 See also
- 9 References
- 10 Sources
- 11 External links
Parts of an equestrian saddle
- Tree: the base on which the rest of the saddle is built. Usually based on wood or a similar synthetic material, it is eventually covered in leather or a leather-like synthetic. The tree's size determines its fit on the horse's back, as well as the size of the seat for the rider. It provides a bearing surface to protect the horse from the weight of the rider. The solid saddle tree raises the rider above the horse's back, and distributes the rider's weight, reducing the pounds per square inch carried on any one part of the horse's back, thus greatly increasing the comfort of the horse and prolonging its useful life.
- Seat: the part of the saddle where the rider sits, it is usually lower than the pommel and cantle to provide security
- Pommel or Pomnel (English)/ Swells (Western): the front, slightly raised area of the saddle.
- Cantle: the rear of the saddle
- Stirrup: part of the saddle in which the rider's feet go; provides support and leverage to the rider.
- Leathers and Flaps (English), or Fenders (Western): The leather straps connecting the stirrups to the saddle tree and leather flaps giving support to the rider's leg and protecting the rider from sweat.
- D-ring: a "D"-shaped ring on the front of a saddle, to which certain pieces of equipment (such as breastplates) can be attached.
- Girth or Cinch: A strap that goes under the horse's barrel[clarification needed] that holds the saddle on.
- Panels, Lining, or Padding: Cushioning on the underside of the saddle.
In addition to the above basic components, some saddles also include:
- Surcingle: A long strap that goes over a saddle and around the horse's barrel to hold the saddle on.
- Monkey grip or less commonly Jug handle: a handle that may be attached to the front of European saddles or on the right side of Australian stock saddle. A rider may use it to help maintain their seat or to assist in mounting.
- Horn: knob-like appendage attached to the pommel or swells, most commonly associated with the modern western saddle, but seen on some saddle designs in other cultures.
- knee rolls: Seen on some English saddles , extra padding on the front of the flaps to help stabilize the rider's leg. Sometimes thigh rolls are also added to the back of the flap.
History and development
There is evidence, though disputed, that humans first began riding the horse not long after domestication, possibly as early as 4000 BC. The earliest known saddle-like equipment were fringed cloths or pads used by Assyrian cavalry around 700 BC. These were held on with a girth or surcingle that included breast straps and cruppers. From the earliest depictions, saddles became status symbols. To show off an individual's wealth and status, embellishments were added to saddles, including elaborate sewing and leather work, precious metals such as gold, carvings of wood and horn, and other ornamentation.
The North Iranian Eurasian nomads known in Europe as Scythians and in Asia as Saka developed an early form of saddle with a rudimentary frame, which included two parallel leather cushions, with girth attached to them, a pommel and cantle with detachable bone/horn/hardened leather facings, leather thongs, a crupper, breastplate, and a felt shabrack adorned with animal motifs. These were located in Pazyryk burials finds. These saddles, found in the Ukok Plateau, Siberia were dated to 500-400 BC. Iconographic evidence of a predecessor to the modern saddle has been found in the art of the ancient Armenians, Assyrians, and steppe nomads depicted on the Assyrian stone relief carvings from the time of Ashurnasirpal II. The Scythians also developed an early saddle that included padding and decorative embellishments. Though they had neither a solid tree nor stirrups, these early treeless saddles and pads provided protection and comfort to the rider, with a slight increase in security. The Sarmatians also used a padded treeless early saddle, possibly as early as the seventh century, BC. and depictions of Alexander the Great depict a saddle cloth.
Early solid-treed saddles were made of felt that covered a wooden frame. Asian designs appeared during the Han dynasty approximately 200 BC. One of the earliest solid-treed saddles in the west was the "four horn" design, first used by the Romans as early as the 1st century BC. Neither design had stirrups.
The development of the solid saddle tree was significant; it raised the rider above the horse's back, and distributed the rider's weight on either side of the animal's spine instead of pinpointing pressure at the rider's seat bones, reducing the pressure (force per unit area) on any one part of the horse's back, thus greatly increasing the comfort of the horse and prolonging its useful life. The invention of the solid saddle tree also allowed development of the true stirrup as it is known today. Without a solid tree, the rider's weight in the stirrups creates abnormal pressure points and makes the horse's back sore. Thermography studies on "treeless" and flexible tree saddle designs have found that there is considerable friction across the center line of a horse's back.
The stirrup was one of the milestones in saddle development. The first stirrup-like object was invented in India in the 2nd century BC, and consisted of a simple leather strap in which the rider's toe was placed. It offered very little support, however. The nomadic tribes in northern China are thought to have been the inventors of the modern stirrup, but the first dependable representation of a rider with paired stirrups was found in China in a Jin Dynasty tomb of about AD 302. The stirrup appeared to be in widespread use across China by 477 AD, and later spread to Europe. This invention gave great support for the rider, and was essential in later warfare.
Saddles were improved upon during the Middle Ages, as knights needed saddles that were stronger and offered more support. The resulting saddle had a higher cantle and pommel (to prevent the rider from being unseated in warfare) and was built on a wooden tree that supported more weight from a rider with armor and weapons. This saddle, a predecessor to the modern Western saddle, was originally padded with wool or horsehair and covered in leather or textiles. It was later modified for cattle tending and bullfighting in addition to the continual development for use in war. Other saddles, derived from earlier, treeless designs, sometimes added solid trees to support stirrups, but were kept light for use by messengers and for horse racing.
Development of the modern saddle
One variant of the English saddle was developed by François Robinchon de la Guérinière, a French riding master and author of "Ecole de Cavalerie" who made major contributions to what today is known as classical dressage. He put great emphasis on the proper development of a "three point" seat that is still used today by many dressage riders.
In the 18th century, fox hunting became increasingly popular in England. The high-cantle, high-pommel design of earlier saddles became a hindrance, unsafe and uncomfortable for riders as they jumped. Due to this fact, Guérinière's saddle design which included a low pommel and cantle and allowed for more freedom of movement for both horse and rider, became increasingly popular throughout northern Europe. In the early 20th century, Captain Frederico Caprilli revolutionized the jumping saddle by placing the flap at an angle that allowed a rider to achieve the forward seat necessary for jumping high fences and traveling rapidly across rugged terrain.
The modern Western saddle was developed from the Spanish saddles that were brought by the Spanish Conquistadors when they came to the Americas. These saddles were adapted to suit the needs of vaqueros and cowboys of Mexico, Texas and California, including the addition of a horn that allowed a lariat to be tied or dallied for the purpose of holding cattle and other livestock.
Types of modern equestrian saddle
In the Western world there are two basic types of saddles used today for horseback riding, usually called the English saddle and the "Stock" Saddle. The best known stock saddle is the American western saddle, followed by the Australian Stock Saddle. In Asia and throughout the world, there are numerous saddles of unique designs used by various nationalities and ethnic groups.
English saddles are used for English riding throughout the world, not just in England or English-speaking countries. They are the saddles used in all of the Olympic equestrian disciplines. The term English saddle encompasses several different styles of saddle, including those used for eventing, show jumping and hunt seat, dressage, saddle seat, horse racing and polo.
To the casual observer, the major distinguishing feature of an English saddle is its flatter appearance, the lack of a horn, and the self-padding design of the panels: a pair of pads attached to the underside of the seat and filled with wool, foam, or air. However, the length and angle of the flaps, the depth of the seat and height of the cantle all play a role in the use for which a particular saddle is intended.
Although to the untrained eye all saddles of a similar design look alike, the "tree" that underlies the saddle is usually one of the defining features of saddle quality. Traditionally, the tree of an English saddle is built of laminated layers of high quality wood reinforced with spring steel along its length, with a riveted gullet plate. These trees are semi-adjustable and are considered "spring trees." They have some give, but a minimum amount of flexibility.
More recently, saddle manufacturers are using various materials to replace wood and create a synthetic molded tree (some with the integrated spring steel and gullet plate, some without). Synthetic materials vary widely in quality. Polyurethane trees are often very well-made, but some cheap saddles are made with fiberglass trees of limited durability. Synthetic trees are often lighter, more durable, and easier to customize. Some designs are intended to be more flexible and move with the horse.
Several companies offer flexible trees or adjustable gullets that allow the same saddle to be used on different sizes of horses.
Western saddles are saddles originally designed to be used on horses on working cattle ranches in the United States. Used today in a wide variety of western riding activities, they are the "cowboy saddles" familiar to movie viewers, rodeo fans, and those who have gone on tourist trail rides. The Western saddle has no padding of its own, and must be used with a saddle blanket or pad in order to provide a comfortable fit for the horse. It also has sturdier stirrups and uses a cinch rather than a girth. Its most distinctive feature is the horn on the front of the saddle, originally used to dally a lariat when roping cattle.
Other nations such as Australia and Argentina have stock saddles that usually do not have a horn, but have other features commonly seen in a western saddle, including a deep seat, high cantle, and heavier leather.
The tree of a western saddle is the most critical component, defining the size and shape of the finished product. The tree determines both the width and length of the saddle as it sits on the back of the horse, as well as the length of the seat for the rider, width of the swells (pommel), height of cantle, and, usually, shape of the horn. Traditional trees were made of wood or wood laminate covered with rawhide and this style is still manufactured today, though modern synthetic materials are also used. Leather is stretched and molded around the tree, with minimal padding between the tree and the exterior leather, usually a bit of relatively thin padding on the seat, and a sheepskin cover on the underside of the skirts to prevent chafing and rubbing on the horse.
Though a western saddle is often considerably heavier than an English saddle, the tree is designed to spread out the weight of the rider and any equipment the rider may be carrying so that there are fewer pounds per square inch on the horse's back and, when properly fitted, few if any pressure points. Thus, the design, in spite of its weight, can be used for many hours with relatively little discomfort to a properly conditioned horse and rider.
The Steel Arch Universal Pattern Mark I was issued in 1891. This was found to irritate riders and in 1893 it was discontinued in favour of the Mark II. In 1898, the Mark III appeared, which had the addition of a V-shaped arrangement of strap billets on the sideboards for the attachment of the girth. This girthing system could be moved forward or back to obtain an optimum fit on a wide range of horses.
From 1902 the Universal Military Saddle was manufactured with a fixed tree, broad panels to spread the load, and initially a front arch in three sizes. The advantage of this saddle was its lightness, ease of repair and comfort for horse and rider. From 1912 the saddle was built on an adjustable tree and consequently only one size was needed. Its advantage over the fixed tree 1902 pattern was its ability to maintain a better fit on the horse’s back as the horse gained or lost weight. This saddle was made using traditional methods and featured a seat blocked from sole leather, which maintained its shape well.[better source needed] Military saddles were fitted with metal staples and dees to carry a sword, spare horse shoes and other equipment.
In the USA, the McClellan saddle was introduced in the 1850s by George B. McClellan for use by the United States Cavalry, and the core design was used continuously, with some improvements, until the 1940s. Today, the McClellan saddle continues to be used by ceremonial mounted units in the U.S. Army. The basic design that inspired McClellan saw use by military units in several other nations, including Rhodesia and Mexico, and even to a degree by the British in the Boer War.
Military saddles are still produced and are now used in exhibitions, parades and other events.
Saddles in Asia date back several thousand years to the time of the Scythians and Cimmerians. Modern Asian saddles can be divided into two groups: Saddles from Central Asia, which have a prominent horn and leather covering, and saddles from East Asia, which have a high pommel and cantle. Central Asian saddles are noted for their wide seats and high horns. The saddle has a base of wood with a thin leather covering that frequently has a lacquer finish. Central Asian saddles have no pad and must be ridden with a saddle blanket. The horn comes in particular good use during the rough horseback sport of buskashi, played throughout Central Asia, which involves two teams of riders wrestling over a decapitated goat’s carcass.
Saddles from East Asia differ from Central Asian saddles by their high pommel and cantle and lack of a horn. East Asian saddles can be divided into several types that are associated with certain nationalities and ethnic groups. Saddles used by the Han Chinese are noted by their use of inlay work for ornamentation. Tibetan saddles typically employ iron covers inlaid with precious metals on the pommel and cantle and universally come with padding. Mongolian saddles are similar to the Tibetan style except that they are typically smaller and the seat has a high ridge. Saddles from ethnic minority groups in China’s southwest, such as in Sichuan and Yunnan provinces, have colorful lacquer work over a leather covering.
Japanese saddles are classified as Chinese-style (karagura) or Japanese-style (yamatogura). In the Nara period the Chinese style was adopted. Gradually the Japanese changed the saddle to suit their needs, and in the Heian period, the saddle typically associated with the samurai class was developed. These saddles, known as kura, were lacquered as protection from the weather. Early samurai warfare was conducted primarily on horseback and the kura provided a rugged, stable, comfortable platform for shooting arrows, but it was not well suited for speed or distance. In the Edo period horses were no longer needed for warfare and Japanese saddles became quite elaborate and were decorated with mother of pearl inlays, gold leaf, and designs in colored lacquer.
- Sidesaddle, designed originally as a woman's saddle that allowed a rider in a skirt to stay on and control a horse. Sidesaddle riding is still seen today in horse shows, fox hunting, parades and other exhibitions.
- Trick (or stunt) riding saddles are similar to western saddles and have a tall metal horn, low front and back, reinforced hand holds and extended double rigging for a wide back girth.
- Endurance riding saddle, a saddle designed to be comfortable to the horse with broad panels but lightweight design, as well as comfortable for the rider over long hours of riding over challenging terrain.
- Police saddle, similar to an English saddle in general design, but with a tree that provides greater security to the rider and distributes a rider's weight over a greater area so that the horse is comfortable with a rider on its back for long hours.
- McClellan saddle, a specific American cavalry model that entered service just before the Civil War with the United States Army. It was designed with an English-type tree, but with a higher pommel and cantle. Also, the area upon which the rider sits was divided into two sections with a gap between the two panels.
- Pack saddle, similar to a cavalry saddle in the simplicity of its construction, but intended solely for the support of heavy bags or other objects being carried by the horse.
- Double seat saddles have two pairs of stirrups and two deep padded seats for use when double-banking or riding double with a child behind an adult rider. The western variety has one horn on the front of the saddle.
- Treeless saddle, available in both Western and English designs, but not built upon a solid saddle tree, intended to be flexible and comfortable on a variety of horses, but also not always able to provide the weight support of a solid tree. The use of an appropriate saddle pad is essential for treeless saddles. (See Controversy section, below)
- Flexible saddle, uses a traditional tree, however the panels are not permanently attached to the finished saddle. These saddles use flexible panels (the part that sits along the horse's back) that are moveable and adjustable to provide a custom fit for the horse and allow for changes of placement as the horse's body develops.
- Bareback pad, usually a simple pad in the shape of an English-style saddle pad, made of cordura nylon or leather, padded with fleece, wool or synthetic foam, equipped with a girth. It is used as an alternative to bareback riding to provide padding for both horse and rider and to help keep the rider's clothing a bit cleaner. Depending on materials, bareback pads offer a bit more grip to the rider's seat and legs. However, though some bareback pads come with handles and even stirrups, without being attached to a saddle tree, these appendages are unsafe and pads with them should be avoided. In some cases, the addition of stirrups without a supporting tree place pressure on the horse's spinuous processes, potentially causing damage.
A saddle, regardless of type, must fit both horse and rider. Saddle fitting is an art and in ideal circumstances is performed by a professional saddlemaker or saddle fitter. Custom-made saddles designed for an individual horse and rider will fit the best, but are also the most expensive. However, many manufactured saddles provide a decent fit if properly selected, and some minor adjustments can be made.
Fitting the horse
The debate about the definition of a fitting saddle is still controversial; however, there is a general rule for fitting that no damage should occur to the horse's skin and no injury should be presented to any muscular or neural tissues beneath the saddle.
Width of the saddle is the primary means by which a saddle is measured and fitted to a horse, though length of tree and proper balance must also be considered. The gullet of a saddle must clear the withers of the horse, but yet must not be so narrow as to pinch the horse's back. The tree must be positioned so that the tree points (English) or bars (Western) do not interfere with the movement of the horse's shoulder. The seat of the saddle must be positioned so that the rider, when riding correctly, is placed over the horse's center of balance. The bars of the saddle must not be so long that they place pressure beyond the last rib of the horse. A too-short tree alone does not usually create a problem, as shorter trees are most often on saddles made for children, though a short tree with an unbalanced adult rider may create abnormal pressure points.
While a horse's back can be measured for size and shape, the saddle must be tried on the individual animal to assure proper fit. Saddle blankets or pads can provide assistance to correct minor fit problems, but no amount of padding can compensate for a poor-fitting saddle. The common problems associated with saddle fitting problems are: bridging, ill-fitting headplates and incorrect stuffing of the panels.
One saddle simply cannot fit all animals. Nor will a saddle fit even the same horse forever without adjustments. As a horse advances in conditioning, age, and training, the back muscles and even the underlying skeletal structures change to some degree. Thus, particularly with English saddles, a saddle fitter needs to make periodic adjustments. Western saddles are more difficult to adjust, though use of shims and padding can compensate for some changes. A lower pressure per square inch of surface area is a bit more forgiving. In some cases, a horse will physically develop to a degree that a different saddle may have to be purchased.
Fitting the rider
Method of fitting riders varies tremendously between designs. Length of the seat is the most common method by which saddles are fitted, though the length and placement of the flaps or fenders of the saddle also influence a person's leg position and thus the way an individual sits. While a too long or too short seat will cause considerable discomfort, and even interfere with the security of the rider on the horse, width is also a factor. Any well-fitting saddle should be wide enough to support the rider's seat bones, without being so wide as to cause discomfort. While saddles are not usually marketed by seat width, designs do vary, and the only way a rider can determine the proper fit of a saddle is to sit on one.
Balance is also a critical factor. A properly balanced saddle places the rider over the horse's center of balance for the equestrian discipline involved. A poor-fitting saddle often leaves a rider feeling that they are sliding backwards and constantly attempting to move "uphill." Less often, a poor-fitting saddle shifts the rider too far forward and creates a sensation of being pushed onto the horse's neck.
Stirrup fit varies greatly between disciplines, from the very short stirrup of the horse racing jockey to the long stirrup of the dressage or reining competitor. However, in all cases, the stirrup leather must be properly placed so that the rider remains in balance over the saddle and is not thrown ahead or behind the motion of the horse when putting weight in the stirrups.
Care of a saddle
All saddles need to be kept clean and dry. They need to be stored under cover, away from weather and dust. Ideally they should be stored in an area where they are kept at a slightly cool but consistent temperature, though the practical need to keep saddles near horses may make temperature-controlled storage difficult. Saddles also need to be kept away from a direct heat source, such as a furnace duct or heater, as excess heat, especially driven by a fan, will dry out the leather. For the same reason, if leather gets wet, it must be allowed to dry naturally, away from a direct heat source. A properly cared-for saddle can last for many decades, even with regular use.
Cleaning is an important part of caring for tack. Tack that is not cleaned will start to build up sweat and dirt, which will cause uncomfortable rubbing on the horse. Sweat and dirt also tend to cause cracking in leather, which may result in breaking. This not only decreases the value of the saddle, but can be very dangerous if critical equipment, such as a stirrup leather, breaks mid-ride. Proper care and conditioning of the saddle will not only increase its useful life, but will also help to retain its value.
A saddle should be cleaned regularly if it used for work. It is usually easiest to clean a saddle when placed on a moveable saddle rack. Ideally, a rider should quickly wipe down the saddle after every ride with a slightly damp, but not wet, sponge or cloth, in order to remove any dirt and sweat. Once a week, or after every 5–7 rides, a more thorough cleaning should be performed.
Saddles are cleaned using saddle soap, followed by a conditioning (moisturizing) product that will restore the natural oils back into the leather. Saddle soap is used with only a minimal amount of water and suds or lather kept low, as getting the leather too wet may lead to a number of problems. In a dry climate, wet leather may dehydrate and crack, particularly if subjected to repeated wet-dry stresses. In a humid climate, excess water for cleaning creates an environment for rot and mold.
Once a saddle is clean, a conditioner is used to restore moisture removed by the cleaning process. While glycerine-based saddle soaps have conditioning properties, it is usually important to remove most soap residue before conditioning to prevent product buildup on the leather. Saddles kept in storage also benefit from occasional conditioning to restore natural oils. While conditioning a saddle is an important element of saddle care, and critical in dry climates, over-oiling may rot jute or other natural fiber stitching, particularly in humid climates. Neatsfoot oil is one traditional conditioner, and products containing beeswax are popular in some areas, but there are also many other commercial blends of conditioning products available. Oil products tend to darken leather from its natural color. Sometimes this is desirable and sometimes not, depending on the desired shade of the leather.
Strap parts of the saddle, such as the stirrup leathers, billets (on an English saddle) and latigo (on a western saddle) also need conditioning, but it varies by climate. In a dry climate, failure to oil straps may result in cracking and weakening of the leather, and they can snap or break. In a more humid climate, too much oil may weaken the leather. Properly conditioned leather is neither brittle nor floppy in texture and flexibility.
Saddles made of synthetic materials can be cleaned using water and a mild cleaner and do not require conditioning. They will tolerate being washed with water without risk of drying out or damaging the material. While synthetics to date will not last as long as a well-cared for leather saddle, they withstand lack of cleaning and care as well as exposure to rain and dampness quite well.
Before a horse show or other competition, the rider should take extra care to clean the saddle and polish all metal parts, including the D-rings, stirrups, stirrup bars and nailheads on an English saddle; and the buckles, dees, and ornamental silver on a Western saddle.
Treeless saddle controversy
Treeless and flexible tree saddles in both English and Western styles are becoming popular today, though there are controversies surrounding their use. Proponents argue that treeless and flex-tree saddles move more easily with a horse's dynamic motion and add shock absorbency between horse and rider. Treeless saddles are also easier to fit the horse, particularly in the area of the horse's scapula (shoulder blade). Opponents of treeless saddles argue that they create abnormal pressure points and over time can cause as many problems as an ill-fitting treed saddle.
Flexible trees may be a compromise between the two camps, but manufacturing quality and design varies greatly. While flexible, adjustable trees are an alternate choice to traditional wooden trees, they carry limitations inherent in both solid tree and treeless designs.
Controversy arises in part because, while treeless and flexible tree saddles have benefits for horses with injuries related to poorly-fitted treed saddles, only a solid tree or very well constructed treeless saddle with correct padding can keep the rider off the horse’s spine and distribute weight evenly across the horse's back without creating localized pressure points. Pressure should never be put directly on the spinuous processes of the horse nor on the ligament system that runs alongside the spine, and many treeless designs do result in rider-related pressure in this area. Furthermore, bareback pads, which are often confused with treeless saddles, provide grip but no structural support to protect the horse's spine. However, a growing number of treeless saddle designs are composed of a system of panels with a wide channel for the spine, thus keeping pressure off the spinuous processes.
Some treeless saddle designs may present problems for riders as well. Without a supportive tree over the horse's withers, a treeless saddle may place the rider behind the movement of the horse, creating pressure on the horse's loin and the rider's low back. Inadequate support may also lead to the rider's seat bones digging into the horse's back. Additionally, a solid tree supports the curvature of the rider's spine which is essential for communication between horse and rider. On the other hand, many riders with preexisting back or hip problems are more comfortable in a treeless saddle due to the extra padding, adjustability and shock absorption. Treeless saddles have started to become popular in horse therapy and hippotherapy for this reason.
- The Earth and Its Peoples: A Global History, volume 1, Authors Richard W. Bulliet, Pamela Kyle Crossley, Daniel R. Headrick, Steven W. Hirsch, Lyman L. Johnson, Publisher Cengage Learning, 2010 Archived 2014-01-02 at the Wayback Machine., ISBN 1439084742, 9781439084748 P.220
- The land of the white elephant: travels, adventures, and discoveries in Burma, Siam, Cambodia, and Cochin-China, Author Frank Vincent, Publisher Harper & Brothers, 1882, P.194 Archived 2014-01-02 at the Wayback Machine.
- Online Etymology Dictionary Archived 2013-11-10 at the Wayback Machine.
- An Illustrated History of Arms and Armour, Authors Auguste Demmin, Publisher Echo Library, 2008 Archived 2014-05-02 at the Wayback Machine., ISBN 1848300492, 9781848300491 P.355
- Bennett (1998), Needs page numbers
- Anthony, David and Brown, Dorcas. "Horses and Humans in Antiquity" Hartwick College. Accessed May 29, 2012
- Beatie, Russel H. Saddles, University of Oklahoma Press, 1981 Archived 2014-01-23 at the Wayback Machine., ISBN 080611584X, 9780806115849 P.18-22
- Frozen Tombs of Siberia: The Pazyryk Burials of Iron Age Horsemen, Author Sergeĭ Ivanovich Rudenko, Publisher, University of California Press, 1970 Archived 2013-12-10 at the Wayback Machine., ISBN 0520013956, 9780520013957 P.129-167
- "State Hermitage Museum: Southern Siberia/Pazyryk" Archived 2011-02-13 at the Wayback Machine..
- Maenchen-Helfen, Otto. The World of the Huns: Studies in Their History and Culture, University of California Press, 1973 p. 208-210 Archived 2013-12-10 at the Wayback Machine.
- Gawronski R. S. "Some Remarks on the Origins and Construction of the Roman Military Saddle." Archeologia (Archaeology) 2004, vol: 55, pages: 31-40
- Bennett, Deb. Conquerors: The Roots of New World Horsemanship. Amigo Publications Inc; 1st edition 1998, p. 100. ISBN 0-9658533-0-6
- West, Christy. "AAEP 2004: Evaluating Saddle Fit." TheHorse.com, February 04 2005, Article # 5393 Archived 2012-07-29 at the Wayback Machine. Web site accessed February 2, 2008
- "The stirrup - history of Chinese science." UNESCO Courier, October, 1988
- Hobson, John M. The Eastern Origins of Western Civilisation. Cambridge University Press,2004, p. 103 ISBN 978-0-521-54724-6, ISBN 0-521-54724-5
- Australian Light Horse Association Archived 2009-04-19 at the Wayback Machine. Retrieved on 26 March 2009
- Universal Pattern 1902 Commonwealth Military Saddle Archived 2009-09-11 at the Wayback Machine. Retrieved on 26 March 2009
- Samurai, warfare and the state in early medieval Japan (Google eBook), Karl F. Friday, Psychology Press, 2004 P.97 Archived 2013-12-10 at the Wayback Machine.
- Handbook to life in medieval and early modern Japan, William E. Deal, Oxford University Press US, 2007 P.155 Archived 2013-12-10 at the Wayback Machine.
- Von PEINEN, K.; Wiestner, T.; Von RECHENBERG, B.; Weishaupt, M. A. (2010-11-01). "Relationship between saddle pressure measurements and clinical signs of saddle soreness at the withers". Equine Veterinary Journal. 42: 650–653. doi:10.1111/j.2042-3306.2010.00191.x. ISSN 2042-3306. Archived from the original on 2016-12-01.
- Treeless Saddles. Practical Horseman, Dec. 2008
|Wikimedia Commons has media related to saddles.|
- Temple, Nancy. "Saddle Fitting Wide Horses."
- Rebecca. "Saddle fitting: the basics and beyond: Avoid saddling yourself with problems."
- Colnar, Rebecca. "Saddle Fitting Savvy."
- "Western Saddle Fitting and Different Tree Sizes."
- Rolo, Jeffrey. "Fitting an English Saddle"
- Fitting Australian Stock Saddles
- Saddle Fitting Guide
- How To Saddle a Horse With a Western Horse Saddle
- Saddle Fitting Articles and FAQs
- "The invention and influences of stirrup"