Jump to content

Provo Utah Temple

Coordinates: 40°15′49.19760″N 111°38′23.20440″W / 40.2636660000°N 111.6397790000°W / 40.2636660000; -111.6397790000
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Nihonjoe (talk | contribs) at 01:36, 10 August 2016 (nav). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Provo Utah Temple
Closed for renovation
Map
Number15
DedicationFebruary 9, 1972, by Joseph Fielding Smith
Site17 acres (6.9 ha)
Floor area128,325 sq ft (11,921.8 m2)
Height175 ft (53 m)
Official websiteNews & images
Church chronology

Ogden Utah Temple

Provo Utah Temple

Washington D.C. Temple
Additional information
AnnouncedAugust 14, 1967, by David O. McKay
GroundbreakingSeptember 15, 1969, by Hugh B. Brown
Open houseJanuary 10-29, 1972
Designed byEmil B. Fetzer
LocationProvo, Utah, United States
Geographic coordinates40°15′49.19760″N 111°38′23.20440″W / 40.2636660000°N 111.6397790000°W / 40.2636660000; -111.6397790000
Exterior finishWhite cast stone with gold anodized aluminum grills, bronze glass panels and a painted spire
Temple designFunctional modern with single center spire design
Baptistries1
Ordinance rooms6 (Movie, stationary)
Sealing rooms12
Clothing rentalYes
NotesHarold B. Lee read the dedicatory prayer prepared by Joseph Fielding Smith
(edit)

The Provo Utah Temple (formerly the Provo Temple) is the 17th constructed and 15th operating temple of The Church of Jesus Christ of Latter-day Saints (LDS Church). Located in the city of Provo, Utah, it was built with a modern single-spire design, similar to the original design of the Ogden Utah Temple.

Since Provo’s early years, a hill just northeast of downtown Provo was known as "Temple Hill." Instead of a temple, however, the Maeser Building was built on the hill in 1911 as a part of the Brigham Young University (BYU) campus. A 17-acre (69,000 m2) block of property at the base of Rock Canyon was chosen as the site for the Provo Temple.

The intention to construct a temple in Provo was announced by the LDS Church on August 14, 1967, and a groundbreaking ceremony was held on September 15, 1969, with construction beginning soon thereafter. Emil B. Fetzer, the architect for the Ogden and Provo temples, was asked to create a functional design with efficiency, convenience, and reasonable cost as key factors.

The temple was dedicated on February 9, 1972, by LDS Church president Joseph Fielding Smith. The two dedicatory services were broadcast to several large auditoriums on the BYU campus, including the 22,700-seat Marriott Center. The temple has 6 ordinance rooms and 12 sealing rooms, and has a total floor area of 128,325 square feet (11,921.8 m2). Thirty-one years after the temple's completion, a statue of the Angel Moroni was added to the spire, which itself was changed from gold to white.

In large part because of its location across the street from a Missionary Training Center and proximity to the BYU campus, the Provo Utah Temple is one of the church's busiest.

Temple presidents

Notable temple presidents have included: A. Theodore Tuttle (1980–82); J. Elliot Cameron (1989–92); Dean L. Larsen (1998–2001); Merrill J. Bateman (2007–10); and Robert H. Daines III (2010–13). The current temple president is Alan Ashton (2013–).[1]

See also

Template:Wikipedia books

References

  1. ^ "New temple presidents", Church News, June 1, 2013

Template:List LDS Temple Utah