Jump to content

Speed Dependent Damping Control

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 132.3.29.79 (talk) at 13:19, 29 September 2016 (References). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Speed Dependent Damping Control (also called SD²C) was an automatic damper system installed on late-1980s and early-1990s Cadillac automobiles. This system firmed up the suspension at 25 mph (40 km/h) and again at 60 mph (97 km/h). The firmest setting was also used when starting from a standstill until 5 mph (8 km/h).

Applications:

Computer Command Ride

The semi-active suspension system was updated as Computer Command Ride in 1991. This new system included acceleration, braking rates, and lateral acceleration to the existing vehicle speed metric.

References

  • Daniel Charles Ross. "Cadillac Allanté". Motor Trend (February 1989): 88–93.
  • Robert J. Reuter (1989-02-01). "Speed Dependent Damping for the 1989 Cadillac Allante". doi:10.4271/890178. SAE Technical Paper 890178. {{cite journal}}: Cite journal requires |journal= (help)