Jump to content

Talk:Lawson criterion

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

Untitled

[edit]

I noticed an error in this article (as of March 12, 2007).

Lawson defined a criterion for a reactor that could either ignite or otherwise provide enough electrical energy to sustain itself. For a reaction with charged byproducts (the holy grail aneutronic reaction), this means that the Lawson Criterion is an ignition criterion. However, for the D-D reaction or the much easier D-T reaction, neutron thermal energy is captured, converted to electrical energy, and fed back into the plasma. When neutron energy is recaptured, the Lawson criterion is softened.

The current Wikipedia article says the Lawson Criterion is 1.5x10^20 s-m^-3. This applies to ignition in a D-T machine. The engineering break-even criterion that Lawson describes implies 6x10^19 s-m^-3.

Eric Meier U. Washington, Dept. Aeronautics and Astronautics 128.95.35.191 19:58, 13 March 2007 (UTC)[reply]

As I read Lawson, he considers two cases, ignition with MCF and burn-up-fraction with ICF, which is just what this article does. The "See also" link to Fusion energy gain factor goes into more detail about the Q required for a practical reactor. Your number seems to be what is required to sustain a plasma with a conversion efficiency of 30%. If you were a real engineer, you would also want a bit left over to sell. So I disagree that the article is in error, but I encourage you to make some of these connections clearer. --Art Carlson 13:03, 14 March 2007 (UTC)[reply]

First, let me say that this is a wonderful and useful article (thanks to all of you who have put it together).

You said "he considers two cases, ignition with MCF and burn-up-fraction with ICF, which is just what this article does". I don't see any direct consideration of ignition. Lawson talks about engineering breakeven. Figure 2 of the original paper shows a dashed line for engineering breakeven requiring 6x10^19 s-m^-3. However, in the text, he does state:

"Conditions for a T-D-Li6 reactor (...) are easier though still severe. The corresponding values of temperature and nt are T=3x10^7 degrees, nt=10^14. To conclude we emphasise that these conditions, though necessary are far from sufficient."

So, formally, that's why the figure 10^20 is usually used as the Lawson Criterion. However, as you point out, a fusion reactor would not be useful without exceeding breakeven! (Except as a neutron source.)

Most references describe the Lawson Criterion as a condition for net energy from a fusion reaction, and not for a practical engineering reactor.

Cheers, Eric Meier 07:52, 18 March 2007 (UTC)[reply]

Looking more closely at the article, I think you're right. He does consider "systems in which the [charged] reaction products are retained", but not in conjuction with general (conductive) heat losses. It is also true that the "softest" condition is when the charged products heat the plasma directly and the neutrons are converted to electricity for auxiliary heating. --Art Carlson 11:45, 18 March 2007 (UTC)[reply]

Triple Product

[edit]

Moving original triple product discussion here, it's very poor and doesn't describe the origin of the triple product correctly. The actual origin is the substitition of , which is an approximation to the curve, into the Lawson criteria. I will fix this at a later date if it has not already been corrected.

The old version is here for reference:

==The "triple product" <math>n_{\rm e}T\tau_{\rm E}</math>== A still more useful figure of merit is the "triple product" of density, temperature, and confinement time, <math>n_{\rm e}T\tau_{\rm E}</math>. For most confinement concepts, whether [[inertial confinement fusion|inertial]], [[magnetic mirror|mirror]], or toroidal confinement, the density and temperature can be varied over a fairly wide range, but the maximum pressure attainable is a constant. When that is the case, the fusion power density is proportional to <math>p^2\langle\sigma v\rangle/T^2</math>. Therefore the maximum fusion power available from a given machine is obtained at the temperature where <math>\langle\sigma v\rangle/T^2</math> is a maximum. Following the derivation above, it is easy to show the inequality :<math>n_{\rm e} T \tau_{\rm E} \ge \frac{12k_{\rm B}}{E_{\rm ch}}\,\frac{T^2}{\langle\sigma v\rangle} </math> For the special case of [[tokamak]]s there is an additional motivation for using the triple product. Empirically, the energy confinement time is found to be nearly proportional to ''n''<sup>1/3</sup>/''P''<sup>2/3</sup>. In an ignited plasma near the optimum temperature, the heating power ''P'' is equal to the fusion power and therefore proportional to ''n''<sup>2</sup>/''T''<sup>2</sup>. The triple product scales as :''nT''τ <math>\propto</math> ''nT'' (''n''<sup>1/3</sup>/''P''<sup>2/3</sup>) <math>\propto</math> ''nT'' (''n''<sup>1/3</sup>/(''n''<sup>2</sup>/''T''<sup>2</sup>)<sup>2/3</sup>) <math>\propto</math> ''T'' <sup>-1/3</sup> Thus the triple product is only a weak function of density and temperature and therefore a good measure of the efficiency of the confinement scheme. The quantity <math>\frac{T^2}{\langle\sigma v\rangle}</math> is also a function of temperature with an absolute minimum at a slightly higher temperature than <math>\frac{T}{\langle\sigma v\rangle}</math>. For the D-T reaction, the physical value is about :<math>n_{\rm e} T \tau_E \ge 10^{21} \mbox{keV s}/\mbox{m}^3</math> This number has not yet been achieved in any reactor, although the latest generations of machines have come close. For instance, the [[TFTR]] has achieved the densities and energy lifetimes needed to achieve Lawson at the temperatures it can create, but it cannot create those temperatures at the same time. [[ITER]] aims to do both.

CnlPepper (talk) 17:39, 12 December 2007 (UTC)[reply]

I think you are wrong. Different portions of the Lawson criterion can be approximated by different power laws depending on the temperature around which the expansion is made. The sigma-v ~ T2 scaling is a consequence of the assumption of fixed pressure. Besides, it is pretty heavy-handed to delete a whole section just because you find parts of the description poor. Anyway, I won't have time to do much before next week. We'll see what you've got by then. --Art Carlson (talk) 18:23, 12 December 2007 (UTC)[reply]
Apologies for being too heavy handed, I brought my bad mood onto wikipedia. I've put it back for now. Though it has already confused some of the students here at Culham. The origin of the T^2 scaling, as far as we have ever enountered, is simply a mathematical approximation to the sig-v curve to within 10\% over the range 10-20 KeV. In Lawson criteria is is assumed that the reactions are occuring at the optimal temperature (~25KeV). In the Triple product this assumption is relaxed. See Tokamaks by John Wesson for example. CnlPepper (talk) 14:11, 13 December 2007 (UTC)[reply]

User:NoodleUK It seems appropriate that there should at least be a small page about John Lawson, following his recent death.

Temperature dependence of Triple Product

[edit]

The triple product is listed as being proportional to temperature to the -1/3. However, the equation that leads to that seems to clearly give temperature to the 7/3, the error coming from two division operations. The following sentence claims that the triple product is a weak function of temperature. Could someone explain why they would call this weak or why this error would have lasted so long? Am I missing something? PSimeon (talk) 05:17, 29 October 2008 (UTC)[reply]

Good eye. The problem was not the result but the expression used for the power. It's been there forever, but I guess no one ever reads mathematical derivations. --Art Carlson (talk) 06:40, 29 October 2008 (UTC)[reply]

Assessment comment

[edit]

The comment(s) below were originally left at Talk:Lawson criterion/Comments, and are posted here for posterity. Following several discussions in past years, these subpages are now deprecated. The comments may be irrelevant or outdated; if so, please feel free to remove this section.

I noticed an error in this article (as of March 12, 2007).

Lawson defined a criterion for a reactor that could either ignite or otherwise provide enough electrical energy to sustain itself. For a reaction with charged byproducts (the holy grail aneutronic reaction), this means that the Lawson Criterion is an ignition criterion. However, for the D-D reaction or the much easier D-T reaction, neutron thermal energy is captured, converted to electrical energy, and fed back into the plasma. When neutron energy is recaptured, the Lawson criterion is softened.

The current Wikipedia article says the Lawson Criterion is 1.5x10^20 s-m^-3. This applies to ignition in a D-T machine. The engineering break-even criterion that Lawson describes implies 6x10^19 s-m^-3.

Eric Meier

U. Washington, Dept. Aeronautics and Astronautics

Last edited at 18:19, 12 March 2007 (UTC). Substituted at 21:44, 29 April 2016 (UTC)

[edit]

Hello fellow Wikipedians,

I have just modified one external link on Lawson criterion. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 17:02, 12 May 2017 (UTC)[reply]

LEAD

[edit]

The lead contains a sentence that says if the Lawson criteria are achieved, "that leads to net energy output." Do we know as a fact that a triple-product result within the boundary defined by Lawson DOES or WILL lead to net energy output? Or would it be more accurate to say "that it MAY lead to net energy output" or "that is necessary for net energy output.
StevenBKrivit (talk) 21:42, 20 November 2020 (UTC)[reply]