Jump to content

British Rail Class 503

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 10mmsocket (talk | contribs) at 10:11, 17 April 2022 (correct use of prime character in UIC description). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

British Rail Class 503
A British Rail Class 503 train in the Liverpool Loop tunnel.
A British Rail Class 503 train in the Liverpool Loop tunnel. This train was one of the original batch built by the LMS in 1938.
The interior of DMBS car 28690 at the Electric Railway Museum, Coventry.
The interior of DMBS car 28690 at the Electric Railway Museum, Coventry.
In service1938–1985
ManufacturerMetro Cammell, Birmingham RC&W
ReplacedMersey Railway electric units
Constructed1938 and 1956
Refurbished1971 (First class accommodation removed)[1]
1972 (End doors fitted)[1]
Scrapped1985
Number built
  • 19 full sets (1938)[1]
  • 24 full sets (1956)
  • 2 TS+DTS (1956)[1]
Number preserved1[2]
Number scrapped44
Formation3 cars per trainset:
Diagram
  • BR EB203 or LMS 344A (DMBS)[3]
  • BR EH214 or LMS 368A (TS)[3]
  • BR EE202 or LMS 392A (DTS)[3]
Fleet numbers
  • 28672-28690 (DMBS 1938)
  • 28371-28394 (DMBS 1956)
  • 29702-29720 (TS 1938)
  • 29821-29846 (TS 1956)
  • 29271-29289 (DTS 1938)
  • 29131-29156 (DTS 1956)[4]
Capacity
  • 40 (First class)
  • 141 (Third Class)[5]
Operators
DepotsBirkenhead Central[6][7]
Birkenhead North[7][8]
Lines served
Specifications
Train length176 ft 11 in (53.92 m)[1]
Car length
  • 58 ft 0 in (17.68 m) (DMBS and DTS)[5]
  • 56 ft 0 in (17.07 m) (TS)[5]
Width9 ft 11 in (3.02 m) (less over body, greatest width over footsteps)
Height11 ft 5 in (3.48 m)[5]
Doors4 × Twin 3 ft 9 in (1.14 m) electro-pneumatic sliding doors per car[5]
Wheelbase41 ft 0 in (12.50 m) (Centres of bogies)
7 ft 6 in (2,290 mm) (Bogie)[5]
Maximum speed65 mph (105 km/h)[3]
Weight
  • Total: 77 t (76 long tons; 85 short tons)[5]
  • 37 t (36 long tons; 41 short tons) (DMBS)[10]
  • 20 t (20 long tons; 22 short tons) (TS)[11]
  • 22 t (22 long tons; 24 short tons) (DTS, 29131-29156)[12]
  • 21 t (21 long tons; 23 short tons) (DTS, 29271-29289)[13]
Traction systemBTH[1][5]
Traction motors4 × EE[5]
Power output
  • 135 hp (101 kW) per traction motor[5][14]
  • Total: 540 hp (400 kW)[15]
Tractive effort
  • 4 × 93 hp (69 kW) continuous[5]
  • Total: 372 hp (277 kW) continuous
HVACElectric heating, self-ventilated[5]
Electric system(s)650 V DC third rail or fourth rail[5]
Current collector(s)Contact shoe
UIC classificationBo′Bo′+2′2′+2′2′
BogiesSingle bolster[1]
Braking system(s)Westinghouse electro-pneumatic and straight air brakes
Coupling system
Multiple workingWithin class only
Track gauge1,435 mm (4 ft 8+1⁄2 in) standard gauge
Notes/references
End doors fitted for tunnel working from 1972.[1]

British Rail Class 503 trains were 65 mph (105 km/h) electric multiple units. They were introduced in two batches. The first were in 1938, by the London, Midland and Scottish Railway (LMS) with a further batch (built to a similar design) in 1956 by the then nationalised British Railways (BR). When introduced by the LMS, they were officially known as Class AM3. They were designed for, and operated on, the Wirral & Mersey lines from Liverpool to West Kirby, New Brighton, and Rock Ferry. There were few places on their network of closely spaced stations to attain their maximum speed, except for the open section between Moreton and Meols. All but one set were withdrawn and scrapped by 1985. The final set was used on special Merseyrail services until 1988, and this preserved set was kept at the Electric Railway Museum near Coventry until moved to the Locomotive Storage Ltd warehouse at Margate.

Overview

A 1938 unit stands at the platform, next to two later 1956 units in the sidings, at West Kirby, in 1982.

When introduced by the LMS, the class was officially known as Class AM3.[16][nb 1] The two batches were almost identical, a difference being that the 1938 stock had passenger door-open buttons mounted on the doorleaf itself, whereas on the 1956 the buttons were on the bodyside next to the door.[7] Motor units could be identified from the driving trailers by the ventilation louvres in the bodyside[7] near the car ends which led to ducting down to the motors. Originally, these trains featured a flat front. Emergency end doors were added, in 1972,[1] as part of a Department of Transport directive for when working in a tunnel.[7][17]

The trains were fitted with four position marker lights on the front,[18] which were used throughout their life as indicators to signalmen - both top lights for Rock Ferry, both right-hand lights for West Kirby, and one top light for New Brighton.[citation needed]

When first introduced they were seen to be of a very advanced design for a mainline railway's suburban passenger trains, featuring things such as air-operated sliding doors which were opened and closed by the guard[5] (hitherto trains either had "slam doors" or hand-operated sliding doors). Class 503 were the first group of electric trains on the main British railway system with air-operated power doors, located at the quarter points of each coach under the control of the guard, which became a later general standard.

Builders

They were not built in the LMS's own workshops, but by contractors in Birmingham, Metro Cammell of Saltley[19] who built the motor coaches, and Birmingham RC&W of Smethwick,[19] which built the underframes.[5] Both of whom had prior experience with building this type of train for the London Underground. Significant points of similarity can be seen between the Class 503 and the London Underground O and P stock, produced shortly beforehand by Birmingham RC&W. The traction motors were supplied by British Thomson-Houston.[1]

Operation

Between 1936 and 1938, the Wirral lines were modified and electrified using a 650 V DC third rail system.[20] The new stock was used on the West Kirby line on weekdays, and the New Brighton and Rock Ferry lines on Sundays.[21] including inter-running onto the Mersey Railway through to Liverpool, while the older Mersey Railway electric units were now used on the New Brighton route, during the week.[21]

After the 1956 stock was built, it was normal for the West Kirby route to be operated by the newer stock, and the New Brighton/Rock Ferry routes to be operated mostly by 1938 stock. When the Liverpool loop lines were opened, the stock became fully mixed on all routes.[citation needed]

The units spent most of their working lives on the commuter routes between Liverpool and the Wirral; routes which latterly became known as the Wirral Line of Merseyrail. In 1977, three six-car trains were transferred to the Northern Line. They mainly worked the Kirkby to Garston service until 30 October 1981, and were then returned to the Wirral Line.[7][9]

Wartime destruction and replacements

On the night of 12–13 March 1941[22] four of the 1938 cars, two trailers and two driving trailers,[22] were destroyed by wartime bombing while standing at Birkenhead North in the same air raid which severely damaged Birkenhead Park station,[23] and destroyed much else of Birkenhead and Wallasey. The two associated motor cars remained spare until the 1956 batch was built, when four replacement cars were added to the production. This accounts for the unbalanced number of cars produced in 1956. A known feature of the Ian Allan ABC rolling stock books for many years was that the destroyed cars continued to be listed, incorrectly, until well into the 1960s and after the replacements had been built.[citation needed]

Interiors

Loading gauge restrictions meant the class did not have the width, or length, which was possible with the Class 502 Liverpool to Southport sets introduced shortly afterwards, to a somewhat similar design. Seats in second class were 2+2,[12][13] and in first class 2+1,[11] and all seats aligned properly with the windows, which were generous arrangements for such short journeys.[compared to?] The Class 508 units introduced as their successors in 1985 were notably less attractive[fact or opinion?] in these respects. The first class seats, which occupied most of the length of the trailer car, were retained unaltered when first class accommodation was discontinued, and from having been little used for much of the trains' lifetime became the most popular accommodation.[citation needed]

Maintenance

The main maintenance depot was at Birkenhead North, dedicated to the units.[24] Careful attention allowed them to remain in good condition right up to their final withdrawal in 1985, unlike some other units elsewhere in the country at this time.[citation needed] Every four years, major overhauls, including full repaints, were conducted at Horwich Works,[25] near Bolton. Along with other North-West EMUs, a set would be formed up at Birkenhead North with a match wagon and hauled by locomotive to Horwich.[25] Until 1962, sets were hauled to Horwich via the West Kirby to Hooton Line and, later on, the route was via the Mid-Wirral Line.[25]

Formation

A six-car set at Rock Ferry, in 1983.

It was normal for the trains to operate as 6-car sets at peak times,[7] reduced to 3-car sets off-peak. As all routes doubled their frequency at peak times as well, much of the stock spent a considerable amount of time out of service. There was no major stabling point on the system, various sidings dispersed around the network being used.[citation needed] For much of the trains' life, effort was put into deciding whether to leave the off-peak formations as 6-car on any day. For instance, during Christmas shopping weeks, or fine Summer Sundays, when the network used to handle much additional traffic from Liverpool and Birkenhead, to the seaside town termini of New Brighton and West Kirby.

Numbering

British Railways numbers were:

  • Driving Motor Brake Second (DMBS)
    • M28672M-M28690M (19 cars 1938, Metro Cammell).
    • M28371M-M28394M (24 cars 1956, Metro Cammell).
  • Trailer Second (TS) (Trailer Composite (TC) prior to mid-1970s)
    • M29702M-M29720M (19 cars 1938, 29702-12 by Metro Cammell, 29713-20 by BRCW). 29708/17 destroyed 1941.[22]
    • M29821M-M29846M (26 cars 1956, 29821-30 by BRCW, 29833-46 by Metro Cammell). 29831-2 by BRCW as war replacements.[22]
  • Driving Trailer Second (DTS)
    • M29271M-M29289M (19 cars 1938, BRCW). 29277/86 destroyed 1941.[22]
    • M29131M-M29156M (26 cars 1956, 29131-54 by BRCW). 29155-6 by BRCW as war replacements.[22]

Livery

The units were introduced with an all-over maroon livery by the LMS.[26] From 1949 to 1956, the livery which BR applied was malachite green.[26] Following this, BR green, with a yellow warning panel on the cab ends, was applied.[27] By the early 1970s, the livery was all-over Rail Blue, with the cab ends repainted as full yellow.[28][29] From the late 1970s, the livery became BR blue and grey,[30] which the units carried until withdrawal. The preserved set was repainted in LMS all-over maroon, in 1985.[31]

Withdrawal and preservation

Withdrawal

A preserved signboard from the Class 503 farewell tour, at the Wirral Transport Museum, Birkenhead. Although the six BR manufacturer's plates remain on the board, the six LMS plates have been removed.

The class was replaced by Classes 507 and 508. Although some had been withdrawn from June 1980 onwards,[32] the majority of the Class 503s were progressively withdrawn from June 1984, the final service train running on 29 March 1985.[33] This was followed by a farewell tour on 13 April 1985.[7][31] Cars 28672, 29271 and 29702 had been used as a sandite unit on the Northern Line, after initial withdrawal in 1981.[32][34] The departmental number of 977115 was allocated to car 29702 but never carried.[32] This set was again withdrawn on 6 December 1984.[32][34] DMBS car 28686 was gutted during a fire brigade exercise on 19 June 1983, before being left at Cavendish sidings.[35] Some units were scrapped at Cavendish sidings[7][32][36] on the Birkenhead Dock Branch line, whilst others were scrapped at the nearby Mollington Street depot.[32][37] The remainder were scrapped at Alexandra Dock, BREL Horwich and also in Northwich, mainly under contract to Vic Berry, TW Ward and HP Cartwright.[32]

Preservation

The preserved LMS Wirral and Mersey unit at the Electric Railway Museum, Coventry.

A single set, formed of vehicles 28690, 29720 and 29289, was earmarked for preservation. Though never carried on the unit, the set was numbered under the BR TOPS code as 503 019.[citation needed] This was the last of the units built in 1938 to have been brought into service.[citation needed] The unit is also one of the only two pre-war main line EMUs in existence which are still in original formation, the other being the 2-BIL belonging to the National Railway Museum.[38]

The set was kept in serviceable condition and operated occasional special trains on the Merseyrail network until 1988. During this period, the set was used for the opening of the electrified line between Rock Ferry and Hooton on 30 September 1985 and for special services during Christmas 1985.[39] At the same time, Merseyrail decided not to preserve a second set, due to a lack of spares.[39] Following this, the surviving set participated in the Merseyrail 100 celebration on 6 April 1986.[40] The unit, named Ivor T. Davies G.M. on 14 March 1988,[8] was purchased by Wirral Borough Council in 1991 and stored at Kirkdale until 1996.[41]

Two parts of the set were then sold and kept at Steamport, Southport.[41] Meanwhile, the Driving Trailer coach (DTS) was kept at the Wirral Transport Museum.[42] The two parts of the unit, which were sold, have been owned by the Suburban Electric Railway Association since purchase by its forerunner, the Mersey and Tyneside Electric Preservationists[43] in 1996, and were stored at the Electric Railway Museum on the outskirts of Coventry. After transport of the Driving Trailer coach from Birkenhead, the entire unit was correctly reformed at the Coventry museum in October 2010, for the first time in over 20 years.[44] The Driving Motor coach (DMBS) interior was open to the public during museum open days.

In 2017, the Electric Railway Museum announced that it would be forced to close and relocate its collection. The Class 503 set was moved in May 2018, to the Locomotive Storage Ltd facility in the former Hornby Railways warehouse in Margate.[45]

Notes

  1. ^ This LMS classification scheme should not be confused with the Class 303 EMUs, which were also known as AM3 under the BR scheme, prior to the introduction of TOPS.

References

  1. ^ a b c d e f g h i j k "Class 503 recognition data". The Railway Centre. Archived from the original on 10 September 2012. Retrieved 4 June 2014.{{cite web}}: CS1 maint: unfit URL (link)
  2. ^ "Fleet list". Suburban Electric Railway Association. Retrieved 4 June 2014.
  3. ^ a b c d Vehicle Diagram Book No. 210 for Electric Multiple Units (Including A.P.T.) (PDF). Derby: British Railways Board. 1981. p. EB203, EE202, EH214. Archived from the original (PDF) on 21 January 2015. Retrieved 4 June 2014. {{cite book}}: |work= ignored (help)
  4. ^ Longworth 2015, pp. 18–19
  5. ^ a b c d e f g h i j k l m n o p q Maund 2009, p. 167
  6. ^ Gahan 1983b, p. 51
  7. ^ a b c d e f g h i John Laker, Tony Ballantyne (Photography) (2013). Merseyrail Classes 502 and 503 Remembered (DVD). Middlesex: J & K Video.
  8. ^ a b Maund 2009, p. 213
  9. ^ a b Maund 2001, p. 82
  10. ^ Longworth 2015, p. 310
  11. ^ a b Longworth 2015, pp. 325, 327
  12. ^ a b Longworth 2015, p. 318
  13. ^ a b Longworth 2015, p. 320
  14. ^ Marsden 2008, p. 136
  15. ^ Marsden 1982, p. 120
  16. ^ Marsden 2008, p. 138
  17. ^ Marsden 1982, p. 121
  18. ^ Marsden 1982, p. 122
  19. ^ a b Gahan 1983a, p. 66
  20. ^ Maund 2009, p. 154
  21. ^ a b Maund 2009, p. 161
  22. ^ a b c d e f Maund 2009, p. 234
  23. ^ Maund 2009, p. 177
  24. ^ Maund 2009, p. 156
  25. ^ a b c Cadwallader & Jenkins 2010, p. 75
  26. ^ a b Cadwallader & Jenkins 2010, p. 67
  27. ^ Cadwallader & Jenkins 2010, p. 66
  28. ^ Cadwallader & Jenkins 2010, p. 60
  29. ^ Cadwallader & Jenkins 2010, p. 63
  30. ^ Cadwallader & Jenkins 2010, p. 73
  31. ^ a b Cadwallader & Jenkins 2010, p. 79
  32. ^ a b c d e f g "Class 503, a brief history". Andrew Phillips. Archived from the original on 5 February 2016. Retrieved 8 June 2015.
  33. ^ Maund 2009, p. 214
  34. ^ a b Maund 2001, p. 88
  35. ^ "Readers' round-up: EMU". Rail Enthusiast. EMAP National Publications. October 1983. p. 49. ISSN 0262-561X. OCLC 49957965.
  36. ^ "Trains in the Mersey Docks". Penmorfa. Retrieved 4 June 2014.
  37. ^ "Class 503s at Birkenhead Mollington Street Depot". Martyn Hilbert's Railway Photography. Retrieved 4 June 2014.
  38. ^ "Class 503 Units - Principle Data". Suburban Electric Railway Association. Retrieved 5 June 2014.
  39. ^ a b "No green 503". Rail Enthusiast. No. 52. EMAP National Publications. January 1986. p. 23. ISSN 0262-561X. OCLC 49957965.
  40. ^ "Mersey Railway 100 years old!". Rail Enthusiast. No. 55. EMAP. April 1986. p. 27. ISSN 0262-561X.
  41. ^ a b "LMS 29720 TSO centre car of Class 503 EMU built 1938". Vintage Carriage Trust. Retrieved 4 June 2014.
  42. ^ "Other Third Rail Electric Multiple Units and Locomotives". Southern Electric Group. Archived from the original on 6 June 2014. Retrieved 5 June 2014.
  43. ^ "Who are the Suburban Electric Railway Association?". Suburban Electric Railway Association. Retrieved 4 June 2014.
  44. ^ "LMS Class 503 unit - Back together at last!". Suburban Electric Railway Association. Retrieved 5 June 2014.
  45. ^ Bailes, Kathy (30 May 2018). "Last surviving Mersey Rail Class 503 train arrives at Locomotive Storage in Margate". Isle of Thanet News. Isle of Thanet. Retrieved 2 June 2018.

Sources

Further reading

Retrieved from "https://en.wikipedia.org/w/index.php?title=British_Rail_Class_503&oldid=1083154207"