|Type||General-purpose machine gun|
|Place of origin||Belgium|
|Used by||See Users|
Rhodesian Bush War
South African Border War
Namibian War of Independence
War of Attrition
Yom Kippur War
2003 Iraq conflict
Cambodian–Thai border dispute
Libyan Civil War
|Manufacturer||Fabrique Nationale (FN)
|Weight||11.79 kg (25.99 lb)|
|Length||1,263 mm (49.7 in)|
|Barrel length||630 mm (24.8 in)|
|Width||118.7 mm (4.7 in)|
|Height||263 mm (10.4 in)|
|Action||Gas-operated, open bolt|
|Rate of fire||650–1,000 rounds/min|
|Muzzle velocity||840 m/s (2,756 ft/s)|
|Effective firing range||800 m|
|Maximum firing range||1,800 m from tripod|
|Feed system||Non-disintegrating DM1 or disintegrating M13 linked belt|
|Sights||Folding leaf sight with aperture and notch, front blade|
The FN MAG is a Belgian 7.62 mm general-purpose machine gun, designed in the early 1950s at Fabrique Nationale (FN) by Ernest Vervier. It has been used by more than 80 countries, and it has been made under licence in countries such as Argentina, Egypt, India and the United Kingdom.
The weapon's name is an abbreviation for Mitrailleuse d'Appui Général, meaning general-purpose machine gun (GPMG). The MAG is available in three primary versions: the standard, infantry Model 60-20 machine gun, the Model 60-40 coaxial machine gun for armoured fighting vehicles and the Model 60-30 aircraft variant.
|This section needs additional citations for verification. (January 2013)|
The MAG uses ignited powder gases vented through a port in the barrel to propel a gas piston rod connected to the locking assembly (it uses a long-stroke piston system). The barrel breech is locked with a vertically tilting, downward locking lever mechanism that is connected to the bolt carrier through an articulated joint. The locking shoulder and camming surfaces that guide the locking lever are located at the base of the receiver. The MAG uses a series of proven design concepts from other successful firearms, for example the locking mechanism is modeled on that of the Browning M1918 (BAR) automatic rifle, and the feed and trigger mechanisms are from the WWII-era MG42 universal machine gun.
The MAG fires from an open bolt. Both the spring-powered extractor and ejector are contained in the bolt. After firing, spent cartridge casings are removed through an ejection port located at the base of the receiver (a spring-loaded dust cover of the MG42 type covers the ejection port). The machine gun has a striker firing mechanism (the bolt carrier acts as the striker as it contains a channel that houses the firing pin, which protrudes out from the surface of the bolt upon firing), an automatic-only trigger assembly and a manual cross-bolt push-button safety, which is located above the pistol grip. With the safety placed in the safe setting, the sear mechanism is disabled. The safety can only be engaged with the weapon cocked.
The weapon feeds from the left-hand side from open-link, metal ammunition belts: either the American disintegrating M13 belt (NATO standard) or the segmented German DM1 belt, whose 50-round sections can be linked through a cartridge. In order to adapt the weapon to feed from one belt type to the other, several components of the feed mechanism need to be reconfigured since the position of the feed tray's cartridge stop and pawl angles in the top cover are different. The MAG features a pawl-type feeding mechanism that continues to move the feed link during both the rearward and forward cycles of the reciprocating bolt carrier, producing a smooth belt flow. The feeding mechanism's three pawls are actuated by a roller connected to the bolt carrier. The feed channel rail, feed link, both feed slides and the feed tray are chrome plated. The top cover body is an anodized aluminum casting. In the infantry assault role, the weapon can be fitted with a sheet metal container that houses a 50-round belt and is attached to the left side of the receiver.
The quick-change barrel has a slotted flash suppressor. The barrel's chamber and bore are chromium-lined and the barrel has four right-hand grooves with a 305 mm (1:12 in) rifling twist rate. Also attached to the barrel is the front sight base, carry handle and gas block (equipped with an exhaust-type gas regulator valve with three settings).
The machine gun is fitted with a folding bipod (attached to the end of the gas cylinder) that can be adjusted for height. For carrying or use as a forearm, the aluminum legs can be folded back and secured in slots under the receiver by hooks and a spring-loaded catch. When firing from the hip, the bipod legs remain extended and the left leg is gripped for support. The bipod can be removed from the gas cylinder by tapping-out a roll pin in the gas cylinder head until it is flush and the bipod can be rotated enough to clear the gas cylinder's retaining lugs.
The MAG is also equipped with a fixed wooden stock, pistol grip, carrying handle and iron sights that consist of a forward blade (adjustable mechanically for both windage and elevation) and a folding leaf rear sight with an aperture in the down position for firing distances from 200 to 800 m in 100 m increments and an open U-notch for ranges from 800 to 1,800 m graduated every 100 m. The rear sight is hinged to a base with protective ears that is integral with the receiver's upper forging.
The MAG's receiver is constructed from sheet metal stampings reinforced by steel plates and rivets. The front is reinforced to accept the barrel nut and gas cylinder which are permanently mounted. Guide rails that support the bolt assembly and piston extension during their reciprocating movement are riveted to the side plates. The bolt's guide rails are shaped downward to drive the locking lever into engagement with the locking shoulder, which is also riveted to the side plates. The rear of the receiver has been reinforced and slotted to accept the butt-stock.
In the static machine gun role the weapon is mounted on a tripod that offers a higher degree of accuracy and control than the bipod, for example the FN 360° tripod, which features an elevation adjustment mechanism that enables the weapon's bore axis to be maintained from 300 mm (11.8 in) to 600 mm (23.6 in), has a 30° to +15° elevation change and a 360° traverse range.
FN production variants
|MAG 60.20||Standard infantry version with pistol grip, fixed buttstock, and bipod; Many subvariants including the T3 (L7A1) and T6 (L7A2)|
|MAG 60.30||Fixed aircraft version, firing from a solenoid trigger; Capable, at least in some subvariants, of left and right hand feeding|
|MAG 60.40||Coaxial version for armoured fighting vehicles; Many subvariants including the T3 (M240)|
|MAG 10.10||Jungle version with shorter barrel and buttstock.|
The vehicle-mounted variant of the MAG lacks a stock, bipod, carry handle, pistol grip, ejection port dust cover and a mount for optical sights. It does, however, have a new closed-type gas regulator. Depending on the weapon's employment, the machine gun can also be fitted with an extended charging handle linkage, standard trigger group (with a pistol grip), or a specialized trigger assembly with an electrically fired trigger.
The pintle-mounted aircraft model is fed from either the right- or left-hand side exclusively with the M13 belt. Thus configured weapons typically lack standard iron sights and are equipped with electrically powered triggers.
|L7A1||7.62×51 mm NATO FN MAG 60.20 T3 machine gun.|
|L7A2||L7A1 variant; FN MAG 60.20 T6; Improved feed mechanism and provision for 50 round belt-box.|
|L8A1||L7A1 variant; For mounting inside AFVs. No buttstock. Barrel fitted with fume extractor. Solenoid-triggered, but with folding pistol grip for emergency use.|
|L8A2||L8A1 variant; improved feed mechanism.|
|L19A1||L7A1 variant; extra-heavy barrel.|
|L20A1||L7A1 variant; for remote firing in gun pods and external mountings.|
|L20A2||L20A1 variant; improved feed mechanism.|
|L37A1||L8A1 variant; L8A1 breech & L7 barrel for mounting on AFVs. Conventional pistol grip and trigger, plus kit allowing dismounted use.|
|L37A2||L37A1 variant; L8A2 based. As above.|
|L43A1||L7A1 variant; for use as a ranging gun on the Scorpion light tank|
|L44A1||L20A1 variant; for Royal Navy|
|L112A1||L7A2 variant; for mounting on Lynx Helicopter|
The L7 general-purpose machine gun is used by the British Army. The L7 and the related L8 are license-built derivatives of the MAG. The official British Army designation for the current version is the L7A2 GPMG (General Purpose Machine Gun). The L7 was adopted by the British forces as a replacement for the long-serving Vickers machine gun (in the medium role) and the Bren (in the light assault role), following trials in 1957. Built under license originally by Royal Small Arms Factory, Enfield Lock and currently by Manroy Engineering, it serves in the British Army, the Royal Marines and other services. There have been two main variants, the L7A1 and L7A2, developed for infantry use, with the L7A2 having superseded the earlier variant. Several other variants have been developed, notably the L8 (produced in the L8A1 and L8A2 versions), modified for mounting inside armoured vehicles (the L37 variant was developed for mounting on armoured vehicles). Although intended to replace the Bren entirely, that light machine gun (re-titled as the L4) continued in use in jungle terrain (especially in the Far East), where there was no requirement for the medium machine gun role, and with secondary units, until the adoption of the L86A1 Light Support Weapon (LSW). The LSW was intended to replace both the L7 and the L4 in the light machine gun role, but dissatisfaction with the L86's sustained fire capabilities and reliability resulted in combat units continuing to utilize the L7 whenever possible (although neither it, nor its 7.62×51 mm NATO ammunition were supposed to be issued to infantry platoons). The British Army and Royal Marines have since been issued with the L110A2 (FN Minimi Para) to replace the LSW as the light section support or fire support weapon. This uses the same NATO-standard 5.56×45mm ammunition as the L85 assault rifle. However 7.62 mm L7 variants continue to be used in both dismounted roles and mounted on some British military vehicles, naval vessels, and aircraft.
In 1961, the Royal Small Arms Factory, Enfield (now BAE Systems) in the United Kingdom, undertook license production of the MAG in the following versions: L7A2, L8A2, L37A2, L20A1 and the L43A1. These models all use the M13 ammunition belt.
The L7A2, general-purpose machine gun, replaced the L7A1 in service with the British Army. Compared to the MAG Model 60-20, it features, among other minor changes, a 10-position gas regulator valve, a plastic butt-stock and a bracket, used to mount optical day- and night-vision sights, mounted to the left side of the receiver. In a stationary defensive role, the L7A2 can be mounted on the L4A1 tripod in conjunction with a periscope sight.
The L8A2 coaxial tank machine gun (replaced the L8A1) has a different gas valve switch (closed, single-position), when compared to the analogous Model 60-40, a different flash hider and a modified cocking handle. The weapon also has a trigger group that accepts electrical input and a lever in the feed tray that enables the belt to be removed without lifting the feed tray cover.
Another tank machine gun is the L37A2 (succeeded the L37A1) designed to be mounted on tank turrets, in the commander's position, on wheeled armoured vehicles and on armored personnel carriers. It differs from the L8A2 primarily in its trigger, which was adapted from the L7A2 GPMG. The machine gun can be used in the ground role for self-defense, by dismounted vehicle crew members, the egress kit consists of an L7A2 barrel, bipod and buttstock.
The L20A1 aircraft machine gun was based on the L8A2, from which it differs by having an electrical trigger and a slotted flash suppressor. The L20A1 can be converted to right-hand feed by changing several components in the feed mechanism.
The L43A1, also developed from the L8A2, is a coaxially mounted tank machine gun used to sight-in the vehicle's main gun by firing ballistically matched tracer ammunition at the target to confirm the trajectory visually. The weapon's barrel, fitted with a flash hider, has a reinforced and heavier structure that increases the weapon's accuracy especially during sustained fire.
Swedish Army variants
All versions are licence-manufactured by FFV-Carl Gustaf. The Swedish abbreviation for "kulspruta" (machine gun, lit. "bulletspray") is "ksp". "Strv" is the abbreviation of "Stridsvagn" (battle tank).
Kulspruta 58 B: In the early 1970s, the weapon was modified with a new gas regulator and at the same time the barrels were replaced to the new standard 7.62 NATO, same as used by the AK 4. Ksp 58 replaced the considerably heavier Ksp m/42B in the infantry units.
Kulspruta 58 Strv: stripped variant mainly used for fixed mounting in tanks. Phased out along with Stridsvagn 103.
Kulspruta 58 D: Reserved designation for the renovated and modified Ksp 58B. The trial version is referred to as 'Ksp 58 DF', where the 'F' stands for 'Försök' (Experimental). Some of the modifications:
- A MIL-STD 1913 Picatinny rail system added. Half of the weapons feature an adjustable rail - the others a fixed.
- Red dot sight (Aimpoint CompCS).
- The carrying handle is shortened to half its original length. This was necessary in order to fit an extended rail for sight systems.
- Collapsible butt stock or folding stock.
- 100 mm shorter barrel.
- Better and shorter flash hider to reduce the length of the weapon and to produce a smaller muzzle flash, which means less disruption to the user's night vision.
- Fluted barrel in order to reduce the weight and better dissipate the heat of the barrel.
- Gas regulator has only 4 settings (instead of 8). The last position is painted red and is intended for emergency use.
- Larger 100-round ammunition pouches replaced 50-round pouches.
- New ammunition cases.
- New equipment bags.
- Bi-pod is painted green.
- There is a sheet for protection / one side green other side white / summer & winter camouflage.
- The weight of the MG is the same, but the entire system is 3 kg (6.5 lbs) lighter.
On January 14, 1977, the US Army awarded a contract to FN Herstal for the delivery of a modernized Model 60-40 variant tank machine gun designated the M240. Initially the firearms were produced in Belgium. Currently they are manufactured in the USA by FN's US wholly owned subsidiary FNMI (FN Manufacturing Inc.) located in Columbia, South Carolina, and by U.S. Ordnance in McCarran, Nevada.
The M240 is built in several versions:
- M240 standard coaxial machine gun used in US armored vehicles. It is used in the M60 series of tanks (where it replaced the M73/M219 7.62 mm machine guns) and the M1 Abrams family. It has an electrically operated trigger and a reloading lever. Compared to the MAG Model 60-40, the M240 has a different flash hider and gas valve.
- M240B is a modernized derivative of the M240G, which features a perforated hand-guard and heat shroud, a MIL-STD-1913 rail integral with the receiver top cover, which enables the use of optical day and night sights, a new synthetic stock and a new ammunition container. It was selected to be the U.S. Army's new medium machine gun on December 1, 1995, replacing the M60 machine gun - it defeated the M60E4 during trials. M240Bs are also replacing M240Gs in USMC service. The M240B weighs 12.5 kg (28 lb) and has a length of 1,245 mm (49.0 in). The rate of fire is 650–750 rounds/min.
- M240C with a right-hand feed system. It is used in the M2 and M3 Bradley series of infantry fighting vehicles as a coaxial gun to the main armament.
- M240D an upgrade of the M240E1 and is optimized for use in military helicopters in a pintle-mounted configuration. The M240D is also supplied with an egress kit for dismounted use.
- M240E1 installed since 1987 on LAV-series wheeled armored fighting vehicles, has a spade-type grip with an integral trigger and cocking mechanism.
- M240G introduced into service with the United States Marine Corps and the 75th Ranger Regiment in the mid 1990s in place of the M60E3. The M240G is used on the M122A1 tripod for stationary use, and is also used in vehicular and aircraft mounts. It weighs 10.99 kg (24.2 lb), has an overall length of 1,245 mm (49.0 in) and a rate of fire of 650–950 rounds/min.
- M240H an improved version of the M240D. The M240H features a rail equipped feed cover, an improved flash suppressor, and has been configured so it can be more quickly converted to infantry standard using an Egress Kit. The M240H is 41.2 in (1,050 mm) long, has a 23.6 in (600 mm) barrel, and has an empty weight of 26.3 lb (11.9 kg).
- M240L is a development of the M240B reduced in weight by 5.5 pounds (2.5 kg). The weight savings on the M240L are achieved by incorporating titanium and by using alternative fabricating methods for major components. A short barrel and collapsible stock are available.
- Argentina: The MAG is in use in the Argentine Army as the 7,62 Ametralladora Tipo 60-20 MAG after being purchased more than two decades ago. The MAG saw action during the Falklands War. Argentinian MAGs were license-manufactured by the state-owned Dirección General de Fabricaciones Militares (DGFM) arsenal.
- Australia: The MAG is the standard GPMG of the Australian Defence Force, in particular the Australian Army, where it is known as the MAG 58. It is also used by the Australian Customs and Border Protection Service.
- Austria: The MAG is used by the Austrian Army as the 7,62 mm MG FNMAG/Pz and is used in the Schützenpanzer Ulan and the Leopard 2A4. It's also used as the armament of the new S-70A-42 Black Hawk helicopters.
- Belgium: Designated MAG M2 and MAG M3 for the coax version.
- Brazil: Standard support weapon of the Brazilian Army, known as the M971.
- Burkina Faso
- Canada: Used in the Canadian Forces with the designation the C6 GPMG, it is used primarily as a platoon level support weapon One or two C6 machine guns are assigned to each Rifle platoon. The C6 GPMG is also mounted on a variety of vehicles, including the LAV III, the Coyote, the Leopard C2, and the G-Wagon LUVW. In these vehicles the C6 GPMGs are co-axially and pintle mounted and used to provide fire support to the infantry or for local defence of the vehicle itself.
- China: Made for export as the CQ, 7.62 × 51 with an adjustable butt. The XY, 7.62 × 51 is made with a wooden butt.
- Democratic Republic of Congo
- Denmark: Used as armament in EH101 
- Dominican Republic
- El Salvador
- Egypt: Made under license by the Maadi Company for Engineering Industries.
- Estonia: The Swedish-made version known as the Ksp 58B has been adopted as the standard MG.
- France: 500 machine guns were purchased in 2011, and an additional 10,000 machine guns will eventually be supplied.
- Greece: Used by the EKAM counter-terrorist unit of the Hellenic Police.
- India: Manufactured by the Ordnance Factories Board under license.
- Indonesia: Standard general-purpose machine gun of Indonesian Armed Forces. Also used by Komando Pasukan Katak (Kopaska) tactical diver group and Komando Pasukan Khusus (Kopassus) special forces group. FN MAGs made under license as the SPM2 GPMG by PT Pindad.
- Ireland; Irish Defence Forces .
- Israel: Used by the Israel Defense Forces.
- Jamaica: Battalion-level fire support weapon of the Jamaica Defence Force.
- Latvia: The Swedish-made version known as the Ksp 58B has been adopted by the national guard as the standard MG.
- Lebanon:Used by the Lebanese Armed Forces
- Lithuania: Lithuanian Armed Forces.
- Monaco: Compagnie des Carabiniers du Prince.
- Morocco: MAG-60-20 Infanterie T1.
- Netherlands: Used by the Navy, Marine Corps, Air Force and Army.
- New Zealand: The New Zealand Defence Force originally purchased the British-made L7A2 version of the MAG in 1976. These are now being replaced by several versions of the Belgian-made MAG-58, which was originally introduced into service as part of the introduction of the NZLAV. The FN-made MAGs are now used in the infantry light machine gun (LMG) role as a flexible mounted machine gun on the LOV and UH-1H and as a heavy sustained fire machine gun.
- Nicaragua: The Nicaraguan National Guard used the FN MAG from 1974 to 1979.
- Saudi Arabia
- Singapore: In use by Singapore Armed Forces and Police Coast Guard. Licensed production carried out by Ordnance Development and Engineering Company of Singapore, now integrated to ST Engineering. Two versions produced, one infantry assault variant fitted with a bi-pod, the other co-axial model for armored vehicle or vehicle mountings. One MAG is issued to each rifle platoon. It is always referred to as GPMG or simply MG.
- South Africa
- United Kingdom
- United States: Used by the U.S. Military as the M240.
- Mk 48 machine gun—FN Minimi in 7.62 mm NATO for United States Special Operations Command (USSOCOM)
- Sumitomo NTK-62—an outwardly similar Japanese weapon
- Heckler & Koch HK121—A German derivative intended to replace the well-proven Rheinmetall MG 3
- Vektor SS-77—A South African weapon designed as replacement for the FN-MAG
- "FN MAG® Standard - FN Herstal". Retrieved 2014-01-09.
- Hogg, Ian (2002). Jane's Guns Recognition Guide. Jane's Information Group. ISBN 0-00-712760-X.
- World Gun's FN MAG page. Retrieved on November 21, 2008.
- "Modern Firearms - FN MAG". World.guns.ru. Retrieved 2012-07-30.
- "General Purpose Machine Gun". Army.mod.uk. Retrieved 2011-06-24.
- [dead link]
- "Göta Vapenhistoriska Sällskapet". March 31, 2010.
- MAG 7.62 being used in military training exercises in Misiones, Argentina: http://www.infobae.com/adjuntos/imagenes/99/0079971B.jpg
- Multiplying the Sources. Retrieved on October 5, 2008.
- European arms exports to Latin America - An inventory. Retrieved on August 15, 2008.
- [dead link]
- "House Hansard 14 June 2005, p 209". Parlinfo.aph.gov.au. Retrieved 2011-06-24.
- 7,62 mm Maschinengewehr FN MAG 58. Retrieved on April 2, 2008.
- BMLV - Presseabteilung - Referat Internet. "Österreichs Bundesheer - Waffen und Gerät - Turmdachmaschinengewehr MAG (für Leopard A4)" (in Dutch). Bmlv.gv.at. Retrieved 2011-06-24.
- Jones, Richard (2009). Jane's Infantry Weapons 2009-2010. Jane's Information Group. pp. 896–898. ISBN 0-7106-2869-2.
- "Landcomponent Onderwerp Bewapening MAG 7.62 mm" (in Dutch). Mil.be. Retrieved 2011-06-24.
- [dead link]
- "TC6 GENERAL PURPOSE MACHINE-GUN". Army.forces.gc.ca. 2009-07-20. Retrieved 2011-06-24.
- "Canadian Small Arms – Automatic Rifles – A Visual Guide". Canadian American Strategic Review. Archived from the original on 2011-02-07. Retrieved 2008-04-02.
- Gander, Terry J.; Hogg, Ian V. Jane's Infantry Weapons 1995/1996. Jane's Information Group; 21 edition (May 1995). ISBN 978-0-7106-1241-0.
- Popenker, Maxim & Williams, Anthony G., page 41.
- Norman Friedman (January 1997). The Naval Institute Guide to World Naval Weapons Systems, 1997-1998. Naval Institute Press. pp. 460–. ISBN 978-1-55750-268-1.
- "G3 Defence Magazine August 2010". En.calameo.com. 2010-08-04. Retrieved 2011-06-24.
- "Eesti Kaitsevägi - Tehnika - Kuulipilduja KSP-58" (in Estonian). Mil.ee. Retrieved 2011-06-24.
- "FN Herstal wins French Competition for 7.62 Machine Guns". Fnherstal.com. Retrieved 2011-06-24.
- "Greece Ministry of Public Order Press Office: Special Anti-Terrorist Unit". http://astynomia.gr - Official Website of the Hellenic Police. July 2004. Retrieved 2009-09-27.
- "Kopassus & Kopaska - Specijalne Postrojbe Republike Indonezije" (in Croatian). Hrvatski Vojnik Magazine. Retrieved 2010-06-12.
- "Un repaso a las armas ligeras de Pindad" (in Spanish). ARMAS. Retrieved 2010-07-05.
- Jones, Richard (2009). Jane's Infantry Weapons 2009-2010. Jane's Information Group. p. 359. ISBN 0-7106-2869-2.
- Army Weapons - General Purpose Machine Gun. Retrieved on April 2, 2008.
- "Modern Firearms: Negev machine gun". World.guns.ru. 2011-01-24. Retrieved 2011-06-24.
- ncoicinnet. "Equipment - Weapons". Jdfmil.org. Retrieved 2011-06-24.
- Special Operations Report -Spotlight Jordan
- Jones, Richard D. Jane's Infantry Weapons 2009/2010. Jane's Information Group; 35 edition (January 27, 2009). ISBN 978-0-7106-2869-5.
- "Volstad Armies of the Gulf War". Gordon L. Rottman. 1993. p. 50.
- [dead link]
- "Lietuvos kariuomenė :: Ginkluotė ir karinė technika » Kulkosvaidžiai » Kulkosvaidis FN MAG" (in Lithuanian). Kariuomene.kam.lt. 2009-04-17. Retrieved 2011-06-24.
- "Armement" (in French). Armee.lu. Retrieved 2011-06-24.
- Giletta, Jacques (2005). Les Gardes Personnelles des Princes de Monaco (1st ed.). Taurus Editions. ISBN 2 912976-04-9.
- Ezell, Eward. Small Arms Today (Stackpole, 1988).
- "Mag, machinegeweer 7,62 mm" (in Dutch). Defensie.nl. Retrieved 2011-06-24.
- "Machine Guns". Army.mil.nz. 2008-02-11. Retrieved 2011-06-24.
- "Norwegian Armed Forces Adopt FN MINIMI™ Machine Gun". Fnherstal.com. 2011-02-08. Retrieved 2011-06-24.
- Cocks, Chris (2009). Fireforce: One Man's War in the Rhodesian Light Infantry. 30° South Publishers. p. 102. ISBN 0-9584890-9-2.
- Armor. U.S. Armor Association. 1996.
- "7.62 mm MAG Light Machine Gun". Slovenskavojska.si. Retrieved 2011-06-24.
- Medeltung kulspruta 58. Retrieved on October 9, 2008. (Swedish)
- Henrik Svensk. "SoldF". SoldF. Retrieved 2011-06-24.
- [dead link]
|Wikimedia Commons has media related to FN MAG.|
- FN Herstal official site
- FNH Firearms Blog
- Modern Firearms
- Video of the Canadian C6 GPMG
- C6 tracer fire
- Canadians exercise with the C6
- Video of the L7A2 GPMG in British service
- Video of operation on YouTube (Japanese)