Jump to content

Acrylonitrile butadiene styrene: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
added in a little bit qualtify a statement on temperature useage
Dynalab (talk | contribs)
added resistance information
Tag: possible conflict of interest
Line 7: Line 7:


Production of 1 kg of ABS requires the equivalent of about 2 kg of [[petroleum|oil]] for raw materials and energy. It can also be recycled<ref name=recycling>[http://www.anl.gov/techtransfer/Available_Technologies/Environmental_Research/Froth.html Plastics Recycling<!-- Bot generated title -->]</ref>.
Production of 1 kg of ABS requires the equivalent of about 2 kg of [[petroleum|oil]] for raw materials and energy. It can also be recycled<ref name=recycling>[http://www.anl.gov/techtransfer/Available_Technologies/Environmental_Research/Froth.html Plastics Recycling<!-- Bot generated title -->]</ref>.

== Resistance ==
* Excellent resistance (no attack) to Glycerine, Inorganic Salts, Alkalis, Many Acids, Most Alcohols and Hydrocarbons
* Limited resistance (moderate attack and suitable for short term use only) to Weak Acids
* Poor resistance (not recommended for use with) Strong Acids and Solvents, Ketones, Aldehydes, Esters, and some Chlorinated Hydrocarbons<ref>{{cite web | title = Plastic Properties of Acrylonitrile Butadiene Styrene (ABS) | publisher = [http://www.dynalabcorp.com Dynalab Corp] | url = http://www.dynalabcorp.com/technical_info_abs.asp }}</ref>.


== Properties==
== Properties==

Revision as of 21:27, 14 May 2009

Monomers in ABS polymer
Black ABS plastic pipes in use in a wet basement of a paper mill, in Sault Ste. Marie, Ontario.

Acrylonitrile butadiene styrene (ABS) (chemical formula (C8H8· C4H6·C3H3N)n) is a common thermoplastic used to make light, rigid, molded products such as piping (for example Plastic Pressure Pipe Systems), musical instruments (most notably recorders and plastic clarinets), golf club heads (used for its good shock absorbance), automotive body parts, wheel covers, enclosures, protective head gear, buffer edging for furniture and joinery panels, airsoft BBs and toys, including Lego bricks[1]. ABS plastic ground down to an average diameter of less than 1 micrometer is used as the colorant in some tattoo inks. Tattoo inks that use ABS are extremely vivid. This vividness is the most obvious indicator that the ink contains ABS, as tattoo inks rarely list their ingredients[2].

It is a copolymer made by polymerizing styrene and acrylonitrile in the presence of polybutadiene. The proportions can vary from 15 to 35% acrylonitrile, 5 to 30% butadiene and 40 to 60% styrene. The result is a long chain of polybutadiene criss-crossed with shorter chains of poly(styrene-co-acrylonitrile). The nitrile groups from neighboring chains, being polar, attract each other and bind the chains together, making ABS stronger than pure polystyrene. The styrene gives the plastic a shiny, impervious surface. The butadiene, a rubbery substance, provides resilience even at low temperatures. For the majority of applications ABS can be used between −25 and 60 °C as it's mechanical properties vary with temperature. The properties are created by rubber toughening, where fine particles of elastomer are distributed throughout the rigid matrix.

Production of 1 kg of ABS requires the equivalent of about 2 kg of oil for raw materials and energy. It can also be recycled[3].

Resistance

  • Excellent resistance (no attack) to Glycerine, Inorganic Salts, Alkalis, Many Acids, Most Alcohols and Hydrocarbons
  • Limited resistance (moderate attack and suitable for short term use only) to Weak Acids
  • Poor resistance (not recommended for use with) Strong Acids and Solvents, Ketones, Aldehydes, Esters, and some Chlorinated Hydrocarbons[4].

Properties

ABS is derived from acrylonitrile, butadiene, and styrene. Acrylonitrile is a synthetic monomer produced from propylene and ammonia; butadiene is a petroleum hydrocarbon obtained from the C4 fraction of steam cracking; styrene monomer is made by dehydrogenation of ethyl benzene - a hydrocarbon obtained in the reaction of ethylene and benzene. The advantage of ABS is that this material combines the strength and rigidity of the acrylonitrile and styrene polymers with the toughness of the polybutadiene rubber. The most important mechanical properties of ABS are resistance and toughness. A variety of modifications can be made to improve impact resistance, toughness, and heat resistance. The impact resistance can be amplified by increasing the proportions of polybutadiene in relation to styrene and also acrylonitrile although this causes changes in other properties. Impact resistance does not fall off rapidly at lower temperatures. Stability under load is excellent with limited loads.

Even though ABS plastics are used largely for mechanical purposes, they also have good electrical properties that are fairly constant over a wide range of frequencies. These properties are little affected by temperature and atmospheric humidity in the acceptable operating range of temperatures.[5] The final properties will be influenced to some extent by the conditions under which the material is processed to the final product; for example, molding at a high temperature improves the gloss and heat resistance of the product whereas the highest impact resistance and strength are obtained by molding at low temperature.

ABS polymers are resistant to aqueous acids, alkalis, concentrated hydrochloric and phosphoric acids, alcohols and animal, vegetable and mineral oils, but they are swollen by glacial acetic acid, carbon tetrachloride and aromatic hydrocarbons and are attacked by concentrated sulfuric and nitric acids. They are soluble in esters, ketones and ethylene dichloride.

The aging characteristics of the polymers are largely influenced by the polybutadiene content, and it is normal to include antioxidants in the composition. On the other hand, while the cost of producing ABS is roughly twice the cost of producing polystyrene, ABS is considered superior for its hardness, gloss, toughness, and electrical insulation properties. However, it will be degraded (dissolve) [6] when exposed to acetone. ABS is flammable when it is exposed to high temperatures, such as a wood fire. It will "boil", then burst spectacularly into intense, hot flames.

References

  1. ^ ABS - acrylonitrile butadiene styrene On Designsite.dk, lists applications. Retrieved 27 October 2006.
  2. ^ Biology News: Is tattoo ink safe?
  3. ^ Plastics Recycling
  4. ^ "Plastic Properties of Acrylonitrile Butadiene Styrene (ABS)". Dynalab Corp. {{cite web}}: External link in |publisher= (help)
  5. ^ Harper C.A., Handbook of plastic and elastomers, McGraw-Hill, New York, 1975, pp. 1-3,1-62, 2-42, 3-1
  6. ^ Vintage Computing and Gaming | Archive » Why Super Nintendos Lose Their Color: Plastic Discoloration in Classic Machines