Hydrochloric acid
| |
| Names | |
|---|---|
| IUPAC names
Hydrochloric acid
Aqueous hydrogen chloride | |
| Other names
Muriatic acid, Spirit(s) of Salt, Chlorane
| |
| Identifiers | |
| ChemSpider | |
| ECHA InfoCard | 100.210.665 |
| EC Number |
|
| E number | E507 (acidity regulators, ...) |
| RTECS number |
|
| Properties | |
| HCl in water (H2O) | |
| Molar mass | 36.46 g/mol (HCl) |
| Appearance | Clear colorless to light-yellow liquid |
| Density | 1.18g/cm3 |
| Melting point | −27.32 °C (247 K) 38% solution. |
| Boiling point | 110 °C (383 K), 20.2% solution; 48 °C (321 K), 38% solution. |
| Miscible. | |
| Acidity (pKa) | −8.0 |
| Viscosity | 1.9 mPa·s at 25 °C, 31.5% solution |
| Hazards | |
| NFPA 704 (fire diamond) | |
| Flash point | Non-flammable. |
| Related compounds | |
Other anions
|
F-, Br-, I- |
| Supplementary data page | |
| Hydrochloric acid (data page) | |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| |
Hydrochloric acid is the solution of hydrogen chloride (HCl) in water. It is a highly corrosive, strong mineral acid and has major industrial uses. It is found naturally in gastric acid.
Historically called muriatic acid or spirits of salt, hydrochloric acid was produced from vitriol and common salt. The alchemist Jabir ibn Hayyan first formally described it in the eighth century. During the Middle Ages, it was used by alchemists in the quest for the philosopher's stone, and later by European scientists including Glauber, Priestley, and Davy in their scientific research.
With major production starting in the Industrial Revolution, hydrochloric acid is used in the chemical industry as a chemical reagent in the large-scale production of vinyl chloride for PVC plastic, and MDI/TDI for polyurethane. It has numerous smaller-scale applications, including household cleaning, production of gelatin and other food additives, descaling, and leather processing. About 20 million metric tonnes of hydrochloric acid are produced annually.
History
Hydrochloric acid was first discovered around 800 AD by the alchemist Jabir ibn Hayyan (Geber), by mixing common salt with sulfuric acid ("vitriol").[1][2] Jabir discovered many important chemicals, and recorded his findings in over 20 books, which carried his chemical knowledge of hydrochloric acid and other basic chemicals for hundreds of years. Jabir's invention of the gold-dissolving aqua regia, consisting of hydrochloric acid and nitric acid, was of great interest to alchemists searching for the philosopher's stone.[1][2][3]
In the Middle Ages, hydrochloric acid was known to European alchemists as spirits of salt or acidum salis. It is still known as "Spirits of Salt" when sold for domestic cleaning purposes in the United Kingdom. Gaseous HCl was called marine acid air. The old (pre-systematic) name muriatic acid has the same origin (muriatic means "pertaining to brine or salt"), and this name is still sometimes used. Notable production was recorded by Basilius Valentinus, the alchemist-canon of the Benedictine priory Sankt Peter in Erfurt, Germany, in the fifteenth century. In the seventeenth century, Johann Rudolf Glauber from Karlstadt am Main, Germany, used sodium chloride salt and sulfuric acid for the preparation of sodium sulfate in the Mannheim process, releasing hydrogen chloride gas. Joseph Priestley of Leeds, England prepared pure hydrogen chloride in 1772, and in 1818 Humphry Davy of Penzance, England, proved that the chemical composition included hydrogen and chlorine.[1][2][3]
During the Industrial Revolution in Europe, demand for alkaline substances such as sodium carbonate (soda ash) increased, and the new industrial soda process by Nicolas Leblanc (Issoundun, France) enabled cheap large-scale production. In the Leblanc process, salt is converted to soda ash, using sulfuric acid, limestone, and coal, releasing hydrogen chloride as a by-product. Until the British Alkali Act 1863 and similar legislation in other countries, excess HCl was vented to the air. After the passage of the act, soda ash producers were obliged to absorb the waste gas in water, producing hydrochloric acid on an industrial scale.[1][3][4]
When early in the twentieth century the Leblanc process was effectively replaced by the Solvay process without the hydrochloric acid by-product, hydrochloric acid was already fully settled as an important chemical in numerous applications. The commercial interest initiated other production methods which are still used today, as described below. Today, most hydrochloric acid is made by absorbing hydrogen chloride from industrial organic compounds production.[3][4][5]
Since 1988, hydrochloric acid has been listed as a Table II precursor under the 1988 United Nations Convention Against Illicit Traffic in Narcotic Drugs and Psychotropic Substances because of its use in the production of heroin, cocaine, and methamphetamine.[6]
Chemistry
Hydrogen chloride (HCl) is a monoprotic acid, which means it can dissociate (i.e., ionize) only once to give up one H+ ion (a single proton). In aqueous hydrochloric acid, the H+ joins a water molecule to form a hydronium ion, H3O+:[7][8]
- HCl + H2O → H3O+ + Cl−
The other ion formed is Cl−, the chloride ion. Hydrochloric acid can therefore be used to prepare salts called chlorides, such as sodium chloride. Hydrochloric acid is a strong acid, since it is essentially completely dissociated in water.[7][8]
Monoprotic acids have one acid dissociation constant, Ka, which indicates the level of dissociation in water. For a strong acid like HCl, the Ka is large. Theoretical attempts to assign a Ka to HCl have been made.[9] When chloride salts such as NaCl are added to aqueous HCl they have practically no effect on pH, indicating that Cl− is an exceedingly weak conjugate base and that HCl is fully dissociated in aqueous solution. For intermediate to strong solutions of hydrochloric acid, the assumption that H+ molarity (a unit of concentration) equals HCl molarity is excellent, agreeing to four significant digits.[7][8]
Of the seven common strong mineral acids in chemistry, hydrochloric acid is the monoprotic acid least likely to undergo an interfering oxidation-reduction reaction. It is one of the least hazardous strong acids to handle; despite its acidity, it consists of the non-reactive and non-toxic chloride ion. Intermediate strength hydrochloric acid solutions are quite stable upon storage, maintaining their concentrations over time. These attributes, plus the fact that it is available as a pure reagent, mean that hydrochloric acid makes an excellent acidifying reagent.
Hydrochloric acid is the preferred acid in titration for determining the amount of bases. Strong acid titrants give more precise results due to a more distinct endpoint. Azeotropic or "constant-boiling" hydrochloric acid (roughly 20.2%) can be used as a primary standard in quantitative analysis, although its exact concentration depends on the atmospheric pressure when it is prepared.[10]
Hydrochloric acid is frequently used in chemical analysis to prepare ("digest") samples for analysis. Concentrated hydrochloric acid dissolves many metals and forms oxidized metal chlorides and hydrogen gas, and it reacts with basic compounds such as calcium carbonate or copper(II) oxide, forming the dissolved chlorides that can be analyzed.[7][8]
Physical properties
The physical properties of hydrochloric acid, such as boiling and melting points, density, and pH depend on the concentration or molarity of HCl in the acid solution. They range from those of water at very low concentrations approaching 0% HCl to values for fuming hydrochloric acid at over 40% HCl.[7][8][11][12]
| Conc. (w/w) c : kg HCl/kg |
Conc. (w/v) c : kg HCl/m3 |
Conc. Baumé |
Density ρ : kg/l |
Molarity M |
pH |
Viscosity η : mPa·s |
Specific heat s : kJ/(kg·K) |
Vapor pressure PHCl : Pa |
Boiling point b.p. |
Melting point m.p. |
| 10% | 104.80 | 6.6 | 1.048 | 2.87 M | −0.5 | 1.16 | 3.47 | 0.527 | 103 °C | −18 °C |
| 20% | 219.60 | 13 | 1.098 | 6.02 M | −0.8 | 1.37 | 2.99 | 27.3 | 108 °C | −59 °C |
| 30% | 344.70 | 19 | 1.149 | 9.45 M | −1.0 | 1.70 | 2.60 | 1,410 | 90 °C | −52 °C |
| 32% | 370.88 | 20 | 1.159 | 10.17 M | −1.0 | 1.80 | 2.55 | 3,130 | 84 °C | −43 °C |
| 34% | 397.46 | 21 | 1.169 | 10.90 M | −1.0 | 1.90 | 2.50 | 6,733 | 71 °C | −36 °C |
| 36% | 424.44 | 22 | 1.179 | 11.64 M | −1.1 | 1.99 | 2.46 | 14,100 | 61 °C | −30 °C |
| 38% | 451.82 | 23 | 1.189 | 12.39 M | −1.1 | 2.10 | 2.43 | 28,000 | 48 °C | −26 °C |
Hydrochloric acid as the binary (two-component) mixture of HCl and H2O has a constant-boiling azeotrope at 20.2% HCl and 108.6 °C (227 °F). There are four constant-crystallization eutectic points for hydrochloric acid, between the crystal form of HCl·H2O (68% HCl), HCl·2H2O (51% HCl), HCl·3H2O (41% HCl), HCl·6H2O (25% HCl), and ice (0% HCl). There is also a metastable eutectic point at 24.8% between ice and the HCl·3H2O crystallization.[11][12]
Production
Hydrochloric acid is prepared by dissolving hydrogen chloride in water. Hydrogen chloride can be generated in many ways, and thus several precursors to hydrochloric acid exist. The large-scale production of hydrochloric acid is almost always integrated with the industrial scale production of other chemicals.[3]
Industrial market
Hydrochloric acid is produced in solutions up to 38% HCl (concentrated grade). Higher concentrations up to just over 40% are chemically possible, but the evaporation rate is then so high that storage and handling need extra precautions, such as pressure and low temperature. Bulk industrial-grade is therefore 30% to 34%, optimized for effective transport and limited product loss by HCl vapors. Solutions for household purposes in the US, mostly cleaning, are typically 10% to 12%, with strong recommendations to dilute before use. In the United Kingdom, where it is sold as "Spirits of Salt" for domestic cleaning, the potency is the same as the US industrial grade.[3]
Major producers worldwide include Dow Chemical at 2 million metric tonnes annually (2 Mt/year), calculated as HCl gas, and FMC, Georgia Gulf Corporation, Tosoh Corporation, Akzo Nobel, and Tessenderlo at 0.5 to 1.5 Mt/year each. Total world production, for comparison purposes expressed as HCl, is estimated at 20 Mt/year, with 3 Mt/year from direct synthesis, and the rest as secondary product from organic and similar syntheses. By far, most hydrochloric acid is consumed captively by the producer. The open world market size is estimated at 5 Mt/year.[3]
Applications
Hydrochloric acid is a strong inorganic acid that is used in many industrial processes. The application often determines the required product quality.[3]
Pickling of steel
One of the most important applications of hydrochloric acid is in the pickling of steel, to remove rust or iron oxide scale from iron or steel before subsequent processing, such as extrusion, rolling, galvanizing, and other techniques.[3][5] Technical quality HCl at typically 18% concentration is the most commonly used pickling agent for the pickling of carbon steel grades.
- Fe2O3 + Fe + 6 HCl → 3 FeCl2 + 3 H2O
The spent acid has long been re-used as ferrous chloride solutions, but high heavy-metal levels in the pickling liquor has decreased this practice.
The steel pickling industry has developed hydrochloric acid regeneration processes, such as the spray roaster or the fluidized bed HCl regeneration process, which allow the recovery of HCl from spent pickling liquor. The most common regeneration process is the pyrohydrolysis process, applying the following formula:[3]
- 4 FeCl2 + 4 H2O + O2 → 8 HCl+ 2 Fe2O3
By recuperation of the spent acid, a closed acid loop is established.[5] The ferric oxide by-product of the regeneration process is valuable, used in a variety of secondary industries.[3]
Production of organic compounds
Another major use of hydrochloric acid is in the production of organic compounds such as vinyl chloride for PVC. This is often captive use, consuming locally produced hydrochloric acid that never actually reaches the open market. Other organic compounds produced with hydrochloric acid include bisphenol A for polycarbonate, activated carbon, and ascorbic acid, as well as numerous pharmaceutical products.[5]
Production of inorganic compounds
Numerous products can be produced with hydrochloric acid in normal acid-base reactions, resulting in inorganic compounds. These include water treatment chemicals such as iron(III) chloride and polyaluminium chloride (PAC).
- Fe2O3 + 6 HCl → 2 FeCl3 + 3 H2O
Both iron(III) chloride and PAC are used as flocculation and coagulation agents in wastewater treatment, drinking water production, and paper production.
Other inorganic compounds produced with hydrochloric acid include road application salt calcium chloride, nickel(II) chloride for electroplating, and zinc chloride for the galvanizing industry and battery production.[5]
pH Control and neutralization
Hydrochloric acid can be used to regulate the basicity (pH) of solutions.
- OH− + HCl → H2O + Cl−
In industry demanding purity (food, pharmaceutical, drinking water), high-quality hydrochloric acid is used to control the pH of process water streams. In less-demanding industry, technical quality hydrochloric acid suffices for neutralizing waste streams and swimming pool treatment.[5]
Regeneration of ion exchangers
High-quality hydrochloric acid is used in the regeneration of ion exchange resins. Cation exchange is widely used to remove ions such as Na+ and Ca2+ from aqueous solutions, producing demineralized water. The acid is used to rinse the cations from the resins.[3]
- Na+ is replaced by H+
- Ca2+ is replaced by 2 H+
Ion exchangers and demineralized water are used in all chemical industries, drinking water production, and many food industries.[1][3]
Other
Hydrochloric acid is used for a large number of small-scale applications, such as leather processing, household cleaning,[13] and building construction.[5] Oil production may be stimulated by injecting hydrochloric acid into the rock formation of an oil well, dissolving a portion of the rock, and creating a large-pore structure. Oil well acidizing is a common process in the North Sea oil production industry.[3]
Many chemical reactions involving hydrochloric acid are applied in the production of food, food ingredients, and food additives. Typical products include aspartame, fructose, citric acid, lysine, hydrolyzed vegetable protein as food enhancer, and in gelatin production. Food-grade (extra-pure) hydrochloric acid can be applied when needed for the final product.[3][5]
Presence in living organisms
Gastric acid is one of the main secretions of the stomach. It consists mainly of hydrochloric acid and acidifies the stomach content to a pH of 1 to 2.[14]
Chloride (Cl−) and hydrogen (H+) ions are secreted separately in the stomach fundus region at the top of the stomach by parietal cells of the gastric mucosa into a secretory network called canaliculi before it enters the stomach lumen.[15]
Gastric acid acts as a barrier against microorganisms to prevent infections and is important for the digestion of food. Its low pH denatures protein and thereby makes them susceptible to degradation by digestive enzymes such as pepsin. The low pH also activates the enzyme precursor pepsinogen into the active enzyme pepsin by self-cleavage. After leaving the stomach, the hydrochloric acid of the chyme is neutralized in the duodenum by sodium bicarbonate.[14]
The stomach itself is protected from the strong acid by the secretion of a thick mucus layer and of neutralizing sodium bicarbonate. Heartburn or peptic ulcers can develop when these mechanisms fail. Drugs of the antihistaminic and proton pump inhibitor classes can inhibit the production of acid in the stomach, and antacids are used to neutralize existing acid.[14]
Safety
| Dangerous goods labels | |
|---|---|
 
| |
Concentrated hydrochloric acid (fuming hydrochloric acid) forms acidic mists. Both the mist and the solution have a corrosive effect on human tissue, with the potential to damage respiratory organs, eyes, skin, and intestines. Upon mixing hydrochloric acid with common oxidizing chemicals, such as sodium hypochlorite (bleach, NaClO) or permanganate (KMnO4), the toxic gas chlorine is produced. Personal protective equipment such as rubber or PVC gloves, protective eye goggles, and chemical-resistant clothing and shoes are used to minimize risks when handling hydrochloric acid.[1]
The hazards of solutions of hydrochloric acid depend on the concentration. The following table lists the EU classification of hydrochloric acid solutions.[16]
| Concentration by weight |
Classification | R-Phrases |
|---|---|---|
| 10–25% | Irritant (Xi) | Template:R36/37/38 |
| > 25% | Corrosive (C) | Template:R34 Template:R37 |
The United States Environmental Protection Agency rates and regulates hydrochloric acid as a toxic substance.[17]
References
- ^ a b c d e f Van Dorst, W.C.A. (2004). Technical product brochure Hydrochloric Acid (public document ed.). Amersfoort: Akzo Nobel Base Chemicals.
{{cite book}}: Unknown parameter|coauthors=ignored (|author=suggested) (help) - ^ a b c Leicester, Henry Marshall (1971). The historical background of chemistry. New York: Dover Publications. ISBN 0-486-61053-5.
- ^ a b c d e f g h i j k l m n o "Hydrochloric Acid". Chemicals Economics Handbook. SRI International. 2001. pp. p. 733.4000A-733.3003F.
{{cite book}}:|pages=has extra text (help) - ^ a b Aftalion, Fred (1991). A History of the International Chemical Industry. Philadelphia: University of Pennsylvania Press. ISBN 0-8122-1297-5.
- ^ a b c d e f g h Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. pp. 946–48. ISBN 978-0-08-037941-8.
- ^ "List of precursors and chemicals frequently used in the illicit manufacture of narcotic drugs and pychotropic substances under international control" (PDF) (Eleventh Edition ed.). International Narcotics Control Board. 2007.
{{cite web}}:|edition=has extra text (help); Unknown parameter|month=ignored (help) - ^ a b c d e Lide, David (1980–1981). CRC Handbook of Chemistry and Physics (61st edition ed.). CRC Press.
{{cite book}}:|edition=has extra text (help) - ^ a b c d e Perry, R (1984). Perry's Chemical Engineers' Handbook (6th edition ed.). McGraw-Hill Book Company. ISBN 0-07-049479-7.
{{cite book}}:|edition=has extra text (help); Unknown parameter|coauthors=ignored (|author=suggested) (help) - ^ "Dissociation constants pKa and pKb". ChemBuddy.com. Retrieved 2008-09-06.
- ^ Mendham, J.; Denney, R. C.; Barnes, J. D.; Thomas, M. J. K. (2000), Vogel's Quantitative Chemical Analysis (6th ed.), New York: Prentice Hall, ISBN 0-582-22628-7
- ^ a b Van Dorst, W.C.A. (1996–2002). various technical papers (not for open publication ed.). Akzo Nobel Base Chemicals.
- ^ a b Aspen Properties, binary mixtures modeling software (calculations by Akzo Nobel Engineering ed.), Aspen Technology, 2002–2003
- ^ Household plc: really filthy bathroom, Daily Telegraph, 13/09/2003
{{citation}}: Check date values in:|date=(help) - ^ a b c Maton, Anthea (1993). Human Biology and Health. Englewood Cliffs, New Jersey, USA: Prentice Hall. ISBN 0-13-981176-1.
{{cite book}}: Unknown parameter|coauthors=ignored (|author=suggested) (help) - ^ Arthur, C. (2000-08-15). Textbook of Medical Physiology (10th edition ed.). W.B. Saunders Company. ISBN 0-7216-8677-X.
{{cite book}}:|edition=has extra text (help); Check date values in:|date=(help); Unknown parameter|coauthors=ignored (|author=suggested) (help) - ^ "Council Directive 67/548/EEC of 27 June 1967 on the approximation of laws, regulations and administrative provisions relating to the classification, packaging and labelling of dangerous substances". EUR-lex. Retrieved 2008-09-02.
- ^ "HCl score card". United States Environmental Protection Agency. Retrieved 2007-09-12.
External links
- General safety information
- EPA Hazard Summary
- Hydrochloric acid MSDS by American Bioanalytical
- Hydrochloric acid MSDS by Georgia Institute of Technology
- Pollution information