|Place of origin||German Empire|
|Used by||See Usage|
|Wars||World War I
World War II
|Case type||rimless, bottlenecked|
|Bullet diameter||7.94 mm (0.313 in)|
|Neck diameter||8.78 mm (0.346 in)|
|Shoulder diameter||10.90 mm (0.429 in)|
|Base diameter||12.01 mm (0.473 in)|
|Rim diameter||12.05 mm (0.474 in)|
|Rim thickness||1.00 mm (0.039 in)|
|Case length||53.60 mm (2.110 in)|
|Overall length||76.00 mm (2.992 in)|
|Case capacity||3.70 cm3 (57.1 gr H2O)|
|Rifling twist||280 mm (1 in 11.02 in)|
|Primer type||Large rifle|
|Maximum pressure||390.00 MPa (56,565 psi)|
Source(s): Cartridges of the World, 11th ed
The 7.65×53mm Mauser (designated as the 7,65 × 53 Arg. by the C.I.P.) is a first-generation smokeless powder rimless bottlenecked rifle cartridge developed for use in the Mauser Model 1889 rifle by Paul Mauser of the Mauser company. It is also known as 7.65×53mm Argentine, 7.65×53mm Argentine rimless, 7.65mm Argentine, 7.65×53mm Belgian Mauser or 7.65mm Belgian (in the United States) and 7.65×53mm Mauser (in Belgium).
The 7.65×53mm Mauser was the result of considerable experimentation by Paul Mauser to optimize the bullet diameter for use with the new smokeless propellant introduced as Poudre B in the 1886 pattern 8mm Lebel that started a military rifle ammunition revolution. At the time of its development it was a high-performance smokeless-powder cartridge.
This cartridge was loaded commercially by many manufacturers in the United States until about 1936. Hornady is the only major U.S. ammunition manufacturer to still produce this cartridge. Sporting ammunition in this caliber is still loaded in Europe. Norma, Prvi Partizan, Sako and Fabricaciones Militares (FM) currently produce 7.65×53mm ammunition. For reloading the cartridge, use .303" British load data.
The 7.65×53mm Mauser has 3.70 ml (57.1 grains H2O) cartridge case capacity. The exterior shape of the case was designed to promote reliable case feeding and extraction in bolt action rifles and machine guns alike, under extreme conditions.
7.65×53mm Mauser maximum C.I.P. cartridge dimensions. All sizes in millimeters (mm).
Americans would define the shoulder angle at alpha/2 ≈ 22.2 degrees. The common rifling twist rate for this cartridge is 280 mm (1 in 11.02 in), 4 grooves, Ø lands = 7.65 mm, Ø grooves = 7.92 mm, land width = 4.20 mm and the primer type is large rifle.
According to the official Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives (CIP) rulings the 7.65×53mm Mauser can handle up to 390.00 MPa (56,565 psi) Pmax piezo pressure. In CIP member countries every rifle cartridge combination has to be proofed at 125% of this maximum pressure to certify fit for sale to consumers. This means that 7.65×53mm Mauser chambered arms in CIP regulated countries are currently (2013) proof tested at 487.50 MPa (70,706 psi) PE piezo pressure.
The American .308 Winchester cartridge is a close ballistic twin of the 7.65×53mm Mauser. The .308 Winchester being a post World War II cartridge developed by Winchester to provide similar performance in a short bolt action format.
Due to the cartridge case's dimensions, production of 7.65mm brass can be accomplished by reforming .30-06 Springfield cases. Simply resize and trim.
The original 1898 pattern military ball ammunition was introduced in the Mauser Model 1889 and loaded with a 13.65 grams (210.7 gr) round-nosed bullet fired at a muzzle velocity of 650 m/s (2,133 ft/s) with 2,884 J (2,127 ft⋅lbf) muzzle energy.
Following the lead of French and German army commands in developing the spitzer - a pointed-tip - bullet shape, later military ball ammunition was loaded with a 10 g (150 gr) spitzer bullet fired at a muzzle velocity of 830 m/s (2,723 ft/s) with 3,445 J (2,541 ft⋅lbf) muzzle energy from a 589 mm (23.2 in) long barrel became available. It had a maximum range of 3,700 m (4,046 yd).
After that military ball ammunition loaded with a 11.25 g (173.6 gr) spitzer bullet fired at a muzzle velocity of 725 m/s (2,379 ft/s) with 2,957 J (2,181 ft⋅lbf) muzzle energy from a 589 mm (23.2 in) long barrel became available. Besides a pointed nose this projectile also had a boat tail to further reduce drag. It had a maximum range of 5,000 m (5,468 yd).
At one time, the 7.65×53mm Mauser cartridge saw widespread military use. It was used by:
Chambered service weapons
Some of the rifles it was used in were the Mauser Model 1889, Argentine Modelo 1909 Carbine, Modelo 1908, Modelo 1910, the Fittipaldi machine gun, Madsen machine gun and the Argentine FN Model 1949. In Argentinian military service, the cartridge was used from 1891 to the early 1970s in Mauser bolt-action military rifles, as well as a semi-automatic rifle, the FN-49, manufactured by Fabrique Nationale in Belgium.
- Barnes, Frank C. (2006) . Skinner, Stan, ed. Cartridges of the World (11th ed.). Iola, WI, USA: Gun Digest Books. p. 357. ISBN 0-89689-297-2.
- C.I.P. TDCC datasheet 7,65 × 53 Arg.
- Mauser Rifles and Pistols by W. H. B. Smith
- Prvi Partizan Official website
- FN Mauser Model 98 Rifle and Carbine Operator's Manual (PDF), p. 28, archived from the original (pdf) on 2012-05-10
|Wikimedia Commons has media related to 7,65×53 mm Argentino.|
- The 7.65x53 and 7.65x53R page, by Chuck Hawks (accessed 2015-03-14)